For the love of English 3 speeds...
03-17-17, 11:05 PM
Senior Member
Join Date: Mar 2007
Posts: 5,737
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 147 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
03-18-17, 01:29 AM
Junior Member
My tax return came in, and I felt like treating myself for passing my third mate's license. Bought this Raleigh Tourist off eBay, and sent it in to be overhauled. It needed it badly, but now it's almost completely brand spanking new. Rides like an absolute dream, and it shifts and pedals so smoothly.
It's apparently a 1975 or 1976 model; the SA hub is dated December 1974. Dunno where to look on a Tourist for the S/N.
It's apparently a 1975 or 1976 model; the SA hub is dated December 1974. Dunno where to look on a Tourist for the S/N.
Oh I was just dumb; I was looking on the bottom bracket instead of the back of the seat tube. My S/N is ND7239806; it was actually made in March 1977! The old-style hockey-stick chainguard threw me off; I guess they were once again plumbing the parts bin when they assembled this Tourist.
03-18-17, 06:00 AM
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Oh I was just dumb; I was looking on the bottom bracket instead of the back of the seat tube. My S/N is ND7239806; it was actually made in March 1977! The old-style hockey-stick chainguard threw me off; I guess they were once again plumbing the parts bin when they assembled this Tourist.
__________________
Inflate Hard
Inflate Hard
03-18-17, 09:12 AM
Junior Member
. This baby is exactly 40 years old now, and it seriously does not look it at all.
03-18-17, 09:37 AM
Newbie
Join Date: Jul 2016
Location: Asheville/Shelby, NC
Posts: 35
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am possibly looking to change my Brooks mattress saddle. What your favorite saddles for your English 3 Speeds?
03-18-17, 10:51 AM
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
__________________
Inflate Hard
Inflate Hard
Last edited by BigChief; 03-18-17 at 10:59 AM.
03-18-17, 03:29 PM
On the road
Join Date: Aug 2005
Location: New England
Posts: 2,171
Bikes: Old Schwinns and old Raleighs
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 373 Post(s)
Liked 847 Times
in
323 Posts
I prefer the B66 and the B73 - don't care as much for the 72 or the 17.
__________________
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
03-24-17, 11:38 AM
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Finally got the straps to the old original equipment saddlebag replaced. It's going on the 64 Sports I've been working on. This bike had a bent drive side crank arm, missing chainguard, incorrect trigger shifter, schwinn handlebar grips and missing lamp bracket but no rust problems. All that's left to do is clearcoat and polish the chain guard some and try for a better gloss match the the rest of the bike and find some original white grips.
__________________
Inflate Hard
Inflate Hard
03-25-17, 02:46 PM
On the road
Join Date: Aug 2005
Location: New England
Posts: 2,171
Bikes: Old Schwinns and old Raleighs
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 373 Post(s)
Liked 847 Times
in
323 Posts
Up to 80 degrees here today... a good chance to dust out the garage. I also needed to dust off these 3-speeds: 1941 Schwinn New World and 1947 Schwinn Continental.
Then got to take a nice, long ride on the Continental.
I still have to go back to my shed and get all the dust out of there. The English 3 speeds and some other Schwinns still need cleaning. There's a lot of work to be done this spring...
Then got to take a nice, long ride on the Continental.
I still have to go back to my shed and get all the dust out of there. The English 3 speeds and some other Schwinns still need cleaning. There's a lot of work to be done this spring...
__________________
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
03-26-17, 03:50 PM
On the road
Join Date: Aug 2005
Location: New England
Posts: 2,171
Bikes: Old Schwinns and old Raleighs
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 373 Post(s)
Liked 847 Times
in
323 Posts
Much colder today - took out this Raleigh Sprite.
__________________
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
03-26-17, 05:37 PM
Senior Member
Join Date: Mar 2008
Posts: 1,514
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 231 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
Wheel lacing......
Either my eyes are going crazy or the spokes dont interweave. On a 3 cross you typically go over over under. ON the raliegh it seems if the spoke head is on the inside the flange all the crosses are over.
In the rear it seems to go over over over over
(queue the leslie neilson jokes from the naked gun series).
AM i crazy or is that how it is?
I am lacing some new cr-18s at i did the front 32h in the standard over over under pattern but im not sure this is how it was originally. Same with the rear.
What should i be doing? it would seem like the lacing would we stronger and hold the wheel truer if they went over over under in the front and over over over under in the rear. IM going to try the 4x in the rear this time.
THe previous bike i did, i ordered all the same length spokes and did 3x both front and rear and it worked great. This time i was to stick with 4x in the rear as that is the spoke length i bought.
What is the deal with the interweaving of the spokes though? Thoughts?
Either my eyes are going crazy or the spokes dont interweave. On a 3 cross you typically go over over under. ON the raliegh it seems if the spoke head is on the inside the flange all the crosses are over.
In the rear it seems to go over over over over
(queue the leslie neilson jokes from the naked gun series).AM i crazy or is that how it is?
I am lacing some new cr-18s at i did the front 32h in the standard over over under pattern but im not sure this is how it was originally. Same with the rear.
What should i be doing? it would seem like the lacing would we stronger and hold the wheel truer if they went over over under in the front and over over over under in the rear. IM going to try the 4x in the rear this time.
THe previous bike i did, i ordered all the same length spokes and did 3x both front and rear and it worked great. This time i was to stick with 4x in the rear as that is the spoke length i bought.
What is the deal with the interweaving of the spokes though? Thoughts?
03-26-17, 06:13 PM
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,844
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2297 Post(s)
Liked 2,047 Times
in
1,253 Posts
You're right, they weren't inter-weaved. Cheaper, faster production and the Raleigh pattern steel rims would take a beating without it. But if you're building alloy wheels, you're best doing it the right way.
03-26-17, 06:32 PM
Senior Member
Join Date: Mar 2008
Posts: 1,514
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 231 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
SO the right way on a rebuild is either over over under for 3x or over over over under for 4x i assume? This is my second wheelset for these old 3 speeds and i have another set im going to do after this. They are fun to build and quite cheap as far as learning goes.
03-26-17, 08:24 PM
Senior Member
Join Date: Mar 2007
Posts: 5,737
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 147 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
03-26-17, 08:45 PM
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,844
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2297 Post(s)
Liked 2,047 Times
in
1,253 Posts
Ah so i am not crazy. Good.
SO the right way on a rebuild is either over over under for 3x or over over over under for 4x i assume? This is my second wheelset for these old 3 speeds and i have another set im going to do after this. They are fun to build and quite cheap as far as learning goes.
SO the right way on a rebuild is either over over under for 3x or over over over under for 4x i assume? This is my second wheelset for these old 3 speeds and i have another set im going to do after this. They are fun to build and quite cheap as far as learning goes.
03-27-17, 04:32 AM
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,186
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 472 Post(s)
Liked 1,028 Times
in
404 Posts
+1 But I do see over-over-over on some BSO and POS bikes on occasion. They are cheaper to manufacture so do show up on bicycles that were never intended to travel more than 20 miles in their lifetimes. They are probably OK for that though as the hub bearings may not last 20 miles either.
03-27-17, 09:47 AM
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,498
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7346 Post(s)
Liked 2,452 Times
in
1,430 Posts
Ah so i am not crazy. Good.
SO the right way on a rebuild is either over over under for 3x or over over over under for 4x i assume? This is my second wheelset for these old 3 speeds and i have another set im going to do after this. They are fun to build and quite cheap as far as learning goes.
SO the right way on a rebuild is either over over under for 3x or over over over under for 4x i assume? This is my second wheelset for these old 3 speeds and i have another set im going to do after this. They are fun to build and quite cheap as far as learning goes.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
03-27-17, 10:37 AM
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,799
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
Finally got the straps to the old original equipment saddlebag replaced. It's going on the 64 Sports I've been working on. This bike had a bent drive side crank arm, missing chainguard, incorrect trigger shifter, schwinn handlebar grips and missing lamp bracket but no rust problems. All that's left to do is clearcoat and polish the chain guard some and try for a better gloss match the the rest of the bike and find some original white grips.
Did you make the straps or buy them? I have been looking for off-the-shelf leather straps & buckles for a while.
03-27-17, 02:35 PM
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,799
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
Well, it's a 5 speed, but it is S/A IGH
I've been working on my step-thru Sprite this beautiful day. The 3 speed side of the S5 hub worked like a champ with the trigger shifter on the bar (an add-on). The left side of the hub was not reliable at all. It was connected to the original downtube shifter that was plastic and sloppy and I feared it would break (the 3 speed side was already broken).
So I pulled a newer trigger shifter from my stash and installed on the left side of the bars. That required a new cable and housing. I set it up, adjusted the cable, and took it for a ride - everything worked. Now I only need to clean and lube it.
So I pulled a newer trigger shifter from my stash and installed on the left side of the bars. That required a new cable and housing. I set it up, adjusted the cable, and took it for a ride - everything worked. Now I only need to clean and lube it.
Last edited by dweenk; 03-27-17 at 02:53 PM.
03-27-17, 05:08 PM
Senior Member
Join Date: Mar 2008
Posts: 1,514
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 231 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
Thanks. One final question on the 40h rear wheel. I know for a 3x front and the first set of spokes you drop in you skip 3 holes and throw on a spoke nipple. For 4x it has to be different. I cant find any good tutorials on the 4x method. I might have to look at one of my other wheels maybe to get an idea. It cant be that much different then 3x.
03-27-17, 05:18 PM
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,498
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7346 Post(s)
Liked 2,452 Times
in
1,430 Posts
Thanks. One final question on the 40h rear wheel. I know for a 3x front and the first set of spokes you drop in you skip 3 holes and throw on a spoke nipple. For 4x it has to be different. I cant find any good tutorials on the 4x method. I might have to look at one of my other wheels maybe to get an idea. It cant be that much different then 3x.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
03-27-17, 06:46 PM
Senior Member
Here's my other English 3 speed. A 1970's Triumph. The only change I have made to it is the Triumph crank - how could I not! I'd like to fit a period rear rack to this bike - any recommendations?
Last edited by IEthatsME; 03-27-17 at 06:51 PM.
03-27-17, 07:22 PM
Senior Member
Join Date: Mar 2008
Posts: 1,514
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 231 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
My next wheelset will be the crazy weird dynamo hub on the front. I have heard those are hard since they dont have eyelets on the hub.....just little slots that hold the spokes by tension.
im not looking forward to that one.
03-27-17, 07:58 PM
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,498
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7346 Post(s)
Liked 2,452 Times
in
1,430 Posts
@scale, it may be easy enough to devise a system to hold the spoke in place long enough to introduce tension. Maybe put the spoke in and stuff the spoke hole with aluminum foil?
@IEthatsME, I was a kid when that Chopper was around. I thought it was cooler than the Schwinn Stingray. I had an off-brand knockoff of the Stingray, and mine had a Sturmey Archer AW hub also. A neighbor kid showed me how to adjust it with the indicator cable.
@IEthatsME, I was a kid when that Chopper was around. I thought it was cooler than the Schwinn Stingray. I had an off-brand knockoff of the Stingray, and mine had a Sturmey Archer AW hub also. A neighbor kid showed me how to adjust it with the indicator cable.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.