DT levers as bar end
#1
Mother Nature's Son
Thread Starter
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,107
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 852 Post(s)
Liked 1,433 Times
in
815 Posts
DT levers as bar end
I have set of 7700 Dura Ace bar ends, but the right one went fubar, literally partially fell apart. It was only working on friction, before that. I had, on hand, a set of 1050 DT levers for 6 indexed, or friction mode. I looked at the mounts for the levers, and they appeared to be exactly the same. Ego, I went ahead and tried the DT lever as a bar end, and, no surprise, it works just fine in friction for up to 10 speeds. My surprise in doing this is finding that I like the ergonomics of the DT lever much better than the bar end lever. I rarely use the bike they are on, and am giving it to a friend with a different bar and levers. If not for that, I would replace the left bar end with the 105 left DT lever. I was just messaging with a member that is looking for a left bar end, and I offered mine up. I like the bar ends on some set ups, but I will have nothing I want to use bar ends on. If the forum member passes on the left one, it will be available.
Likes For delbiker1:
#2
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,793
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1390 Post(s)
Liked 1,322 Times
in
835 Posts
I think I beat you to it.
In the late 1960s / early 1970s I played around with downtube levers at the ends of drop bars.
I think my favorite barcons are still the first-generation SunTour non-indexed ratchets.
In the late 1960s / early 1970s I played around with downtube levers at the ends of drop bars.
I think my favorite barcons are still the first-generation SunTour non-indexed ratchets.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#3
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,724
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,401 Times
in
1,203 Posts
They work just fine but are longer than traditional bar ends and can spike the knees of taller riders when climbing out of the saddle.
That hurts.
That hurts.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#4
Newbie
Join Date: Jun 2014
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Totally agree. I’m using downtube shifters as bar ends on my miyata and cannondale touring bikes and really love how they feel. I actually like them more than the bar end shifters on my trek. If your knees come close to the ends of your bars, you can look into a wider bar or some flared drop bars.