What Cassette?
#1
Newbie
Thread Starter
What Cassette?
I’m picking up a set of Mavic wheels that have Deore LX hubs. These are going on my Specialized Hardrock for a 1X conversion. My question is, will any 8/9/10 shimano setup work with those hubs? Or do I need to be looking for a specific drivetrain?
Likes For 2old:
#3
Senior Member
Join Date: Mar 2022
Location: Missoula MT
Posts: 1,765
Bikes: Handsome xoxo, Serotta atx, Canyon Endurace CF8
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 904 Post(s)
Liked 1,887 Times
in
844 Posts
make sure it is not a 7speed because 8/9/10 won't work with the earlier 7 speed hubs. I have that problem with a set of early 90's xt 7 speed wheels.
Likes For jadmt:
#4
Newbie
Thread Starter
Thank you very much for the info! The seller said this hub will accept 8/9/10 so that part looks good so far. Any recommendations for a BB/crank set up? I see lots of guys using cheap amazon parts on these conversions but I don’t think I want to go that route, I’d rather get a name brand on there.
#5
Senior Member
Join Date: Mar 2022
Location: Missoula MT
Posts: 1,765
Bikes: Handsome xoxo, Serotta atx, Canyon Endurace CF8
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 904 Post(s)
Liked 1,887 Times
in
844 Posts
Thank you very much for the info! The seller said this hub will accept 8/9/10 so that part looks good so far. Any recommendations for a BB/crank set up? I see lots of guys using cheap amazon parts on these conversions but I don’t think I want to go that route, I’d rather get a name brand on there.
Likes For jadmt:
#6
Newbie
Thread Starter
#7
Senior Member
Join Date: Mar 2022
Location: Missoula MT
Posts: 1,765
Bikes: Handsome xoxo, Serotta atx, Canyon Endurace CF8
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 904 Post(s)
Liked 1,887 Times
in
844 Posts
#8
Senior Member
If the cassette starts with an 11 tooth cog you can use it. 8-12 speed will all work as long as it starts with an 11. The cassettes that start with 9 or 10 tooth cog use different freehubs.