Use for a bent fork?
#1
Eccentric Old Man
Thread Starter
Join Date: Jan 2014
Location: BelleVegas, IL
Posts: 719
Bikes: 1986 Trek 520 Cirrus, 1979 Schwinn Traveler III, Trek T100, 1995 Trek 970, Fuji America
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Likes: 0
Liked 173 Times
in
87 Posts
Use for a bent fork?
Removed from a 25" Schwinn Super LeTour, head badge stamped 1725.
Tange 5C, steerer length 238, 27'' wheels.
The frame is gone, I don't need it so what to do with it?
Cut off steerer for making spacers?
Offer up so a member can straighten?
Thanks
Tange 5C, steerer length 238, 27'' wheels.
The frame is gone, I don't need it so what to do with it?
Cut off steerer for making spacers?
Offer up so a member can straighten?
Thanks
#2
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,828 Times
in
1,995 Posts
find a wooden stool, drill a 1" hole in the center of the seat, set the fork upside down and mimic pop art
#3
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,828 Times
in
1,995 Posts
Likes For SpedFast:
#5
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,799
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,022 Times
in
722 Posts
Wheel truing stand or pitch it in the trash to avoid potential liability issues. I've seen shops use old bent forks for wheel displays but not much need for that with the average person.
#6
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26402 Post(s)
Liked 10,374 Times
in
7,203 Posts
__________________
Likes For 3alarmer:
#7
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Likes For bikemig:
#8
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,833
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,063 Times
in
535 Posts
Need a fork with a pretty good rake, for double ply.
Tim
Tim
Likes For tkamd73:
#10
Newbie
The result, Bicycle Wheel, is the first of Duchamp’s Readymades—objects (sometimes manufactured or mass-produced) selected by the artist and designated as art. Most of Duchamp’s Readymades were individual objects that he repositioned or signed and called art, but Bicycle Wheel is what he called an “assisted Readymade,” made by combining more than one utilitarian item to form a work of art.
I've recently been thinking about a DIY truing stand too, but wouldn't a bent fork be problematic for, uh, straightness?
Likes For jasoninohio:
#11
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,703
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1947 Post(s)
Liked 2,010 Times
in
1,109 Posts
That doesn't look that bad. Put it in your stash.
But I had one that was much worse so I cut the steerer off then split and splayed the thin end to make a head set race remover.
But I had one that was much worse so I cut the steerer off then split and splayed the thin end to make a head set race remover.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#12
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,109
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,022 Times
in
665 Posts
When I worked in a bike shop, (a long, long time ago) one afternoon we finished all the repairs so we had some time to talk and get into trouble. We mounted a fork in a Park workstand. In a bike shop, the base off the stand was large diameter, like 3' and 3/4" thick steel. We took an inner tube and used a fork as the uprights of a slingshot. Of course, we had a supply of bearings to shoot. At first we just shot at a cardboard box across the room. Little by little we tried different size inner tubes, different sized bb and progressively pulled back further and further with it until we had to have two people standing on the base of the work stand and two people pulling the inner tube back. The ball bearings were really zinging. Then we decided we should try to hit something to see what kind of damage it would do. We had a lamp with an incandescent light bulb in it.
I don't know how many tries it took, but we hit the center of the light bulb. I would have expected the bulb to shatter into little pieces, leaving only a base with some jagged glass. However because of speed of the bb, it made only a small opening on the entrance side of the bulb and a larger opening on the exit side of the bulb. The the rest of the glass bulb remained intact.
It is probably not the best use of a fork but for being an improvised device, it was pretty impressive. And, yes, we are lucky we didn't shoot any of our eyes out.
I don't know how many tries it took, but we hit the center of the light bulb. I would have expected the bulb to shatter into little pieces, leaving only a base with some jagged glass. However because of speed of the bb, it made only a small opening on the entrance side of the bulb and a larger opening on the exit side of the bulb. The the rest of the glass bulb remained intact.
It is probably not the best use of a fork but for being an improvised device, it was pretty impressive. And, yes, we are lucky we didn't shoot any of our eyes out.
Likes For Velo Mule:
#13
Junior Member
You could try to get Uri Geller to straighten it. ;>
</ShowingMyAge>
#14
Eccentric Old Man
Thread Starter
Join Date: Jan 2014
Location: BelleVegas, IL
Posts: 719
Bikes: 1986 Trek 520 Cirrus, 1979 Schwinn Traveler III, Trek T100, 1995 Trek 970, Fuji America
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Likes: 0
Liked 173 Times
in
87 Posts
When I worked in a bike shop, (a long, long time ago) one afternoon we finished all the repairs so we had some time to talk and get into trouble. We mounted a fork in a Park workstand. In a bike shop, the base off the stand was large diameter, like 3' and 3/4" thick steel. We took an inner tube and used a fork as the uprights of a slingshot. Of course, we had a supply of bearings to shoot. At first we just shot at a cardboard box across the room. Little by little we tried different size inner tubes, different sized bb and progressively pulled back further and further with it until we had to have two people standing on the base of the work stand and two people pulling the inner tube back. The ball bearings were really zinging. Then we decided we should try to hit something to see what kind of damage it would do. We had a lamp with an incandescent light bulb in it.
I don't know how many tries it took, but we hit the center of the light bulb. I would have expected the bulb to shatter into little pieces, leaving only a base with some jagged glass. However because of speed of the bb, it made only a small opening on the entrance side of the bulb and a larger opening on the exit side of the bulb. The the rest of the glass bulb remained intact.
It is probably not the best use of a fork but for being an improvised device, it was pretty impressive. And, yes, we are lucky we didn't shoot any of our eyes out.
I don't know how many tries it took, but we hit the center of the light bulb. I would have expected the bulb to shatter into little pieces, leaving only a base with some jagged glass. However because of speed of the bb, it made only a small opening on the entrance side of the bulb and a larger opening on the exit side of the bulb. The the rest of the glass bulb remained intact.
It is probably not the best use of a fork but for being an improvised device, it was pretty impressive. And, yes, we are lucky we didn't shoot any of our eyes out.
Likes For eom:
#15
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3883 Post(s)
Liked 6,476 Times
in
3,205 Posts
I like this composition. So, one thing you could do is put it out in the road and take a photo of it. But you already did that. You could drip paint it, ala Jackson Pollock, and retake it. Though, that might not improve the powerful minimalist style you've already captured here.
Likes For SurferRosa:
#16
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3883 Post(s)
Liked 6,476 Times
in
3,205 Posts
Another idea is to leave the fork out in the middle of the road. On a nearby post, staple the above photo with a caption reading, "Lost fork." Append your contact info. See what happens.
#17
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3883 Post(s)
Liked 6,476 Times
in
3,205 Posts
You could carry the fork cross-country to raise awareness of the universal nature of running head-on into something. Could change your life. Could change the world.
Likes For SurferRosa: