Saving bad chrome
#1
Full Member
Thread Starter
Join Date: Jan 2015
Location: Grass Valley, Ca
Posts: 387
Bikes: Surly Cross Check, Specialized Enduro Pro, Lemond Tourmalet
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 105 Post(s)
Liked 192 Times
in
94 Posts
Saving bad chrome
Hi all-
a Pinarello Treviso showed fs local. Post ‘84 model. The chrome on the chain stay is rusty. Don’t think it’ll polish up. Any good methods of saving it you’ve tried? Thinking of just cleaning it up as much as possible and slapping a chain stay guard over it…..
a Pinarello Treviso showed fs local. Post ‘84 model. The chrome on the chain stay is rusty. Don’t think it’ll polish up. Any good methods of saving it you’ve tried? Thinking of just cleaning it up as much as possible and slapping a chain stay guard over it…..
#2
Full Member
Join Date: Sep 2012
Location: Palm Springs, California
Posts: 462
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 460 Times
in
176 Posts
Did you try aluminum foil yet? Soak a rag in some CLR or vinegar drape it over the chainstay and leave it for a few hours. Rub the rust off with a non scratch Scotchbrite, then rub aluminum foil on the chrome. You'd be surprised on how well it cleans up.
Likes For krakhaus:
#3
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
Here are some results I got with just aluminum foil.
Before:
After:
As you can see, it will typically leave whatever pitting was there, but it will usually take off the rust and leave a surface that looks very good from five feet away.
Before:
After:
As you can see, it will typically leave whatever pitting was there, but it will usually take off the rust and leave a surface that looks very good from five feet away.
__________________
My Bikes
My Bikes
#4
Senior Member
I'm probably gonna catch hell for this, but I've used 0000 steel wool soaked in WD-40 with excellent results.
Likes For gearbasher:
#5
Happy With My Bikes
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,186
Bikes: Hi-Ten bike boomers, a Trek Domane and some projects
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 884 Post(s)
Liked 2,307 Times
in
1,117 Posts
The chain stay doesn't look awful. I'd give the crumpled aluminum foil a go first. I like to go with the least destructive methods first before pulling out heavier abrasives or chemicals.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
Likes For Chuck M:
#6
Senior Member
Join Date: Apr 2007
Location: Ottawa, Canada
Posts: 777
Bikes: Raleigh Classic 15, 84; Miyata 912, 85; Miyata Ridge Runner SE, 85; Miyata 610, 86; Miyata 100M, 86; Miyata Valley Runner, 88; Miyata Triple Cross, 89; GT Karakoram, 90; Miyata Elevation 300, 91; Marinoni Touring, 95; Long Haul Trucker, 2013
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 133 Times
in
80 Posts
I've had success with aluminum foil and water.
Likes For John Nolan:
#7
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,186
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 472 Post(s)
Liked 1,028 Times
in
404 Posts
Same here but with 30wt motor oil. I’ve used PB blaster too. Both work well. Some times I use a dull steel scraper on spots where the rust has “bloomed” up through a pin hole and flowed out onto the chromed surface. All of these can produce good results that beat throwing out the part or paying for a re-chrome.
Likes For Prowler:
#9
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 761 Post(s)
Liked 1,563 Times
in
757 Posts
Similar (or worse....) chrome issues to the OP on a frame I'm working on.
Curious what folks do after removing the rust with one of the above methods to protect the pitted/bare metal parts? Clear-coat it? Clear nail polish?
Curious what folks do after removing the rust with one of the above methods to protect the pitted/bare metal parts? Clear-coat it? Clear nail polish?
Likes For ehcoplex:
#10
Senior Member
Best to use bronze wool or brass wool. Doesnt scratch the chrone like steel wool.
Aluminum foil works, is simple and I have it on hand.
Good old Turtle Wax chrome polish works well too.
Aluminum foil works, is simple and I have it on hand.
Good old Turtle Wax chrome polish works well too.
Likes For big chainring:
#11
Am-a-tour
Join Date: Aug 2020
Location: NOVA
Posts: 126
Bikes: 2020 New Albion Privateer, 1983 Schwinn Super Sport, 2022 Rivendell Atlantis
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 65 Times
in
40 Posts
I've had good luck with Johnson paste wax, though it takes re-application every once in a while.
#12
Senior Member
0000 steel wool with chrome polish, I’ve had great results without damaging the chrome.
__________________
Semper fi
Semper fi
Likes For sloar:
#13
TXHC
I’ll add another option to the foil:
coke. The beverage!
I’d definitely clean that up and ride it.
Hit it up with whatever car wax you have post polishing to keep it nice.
coke. The beverage!
I’d definitely clean that up and ride it.
Hit it up with whatever car wax you have post polishing to keep it nice.
Likes For amillhench:
#14
Junior Member
Apply Metal Rescue or Evaporust with a soft tooth brush and keep brushing and applying. Then use wax to seal it.
Likes For Fat Tire Trader:
#15
Senior Member
Join Date: Aug 2015
Posts: 3,297
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1142 Post(s)
Liked 1,739 Times
in
960 Posts
That's not bad, most of that can be wiped away with oil. Car wax would also do very well too, don't be afraid to use your fingernails. I would use the least amount of abrasive.
Here is the Mondia, I wiped this down with chainsaw oil, let it soak, wiped off, then scratched with my nails.
Here is the Mondia, I wiped this down with chainsaw oil, let it soak, wiped off, then scratched with my nails.
Likes For Mr. 66:
#16
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,635
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,796 Times
in
2,282 Posts
There are as many ways to remove rust spots as there are to open a bottle of beer.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#17
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,434
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,048 Times
in
543 Posts
I’m late to the aluminum foil fan club but I have become a lifetime member.
Generally, chrome is VERY hard so any metal/abrasive softer than the chrome will work. Evaporust has also worked well for me.
Side note - NOT a member of the rust converter fan club. There is a time and a place for it - never and in the trash.
Generally, chrome is VERY hard so any metal/abrasive softer than the chrome will work. Evaporust has also worked well for me.
Side note - NOT a member of the rust converter fan club. There is a time and a place for it - never and in the trash.
Likes For RustyJames:
#18
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,803
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2439 Post(s)
Liked 3,122 Times
in
1,964 Posts
Barkeeps Friend, plus tinfoil. If it doesn’t clean up, call it Patina...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#19
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
I DO NOT recommend steel wool! Wash the chrome with warm soapy water and a soft rag. Dry it off and then, crumple up a piece of aluminum foil, shiny side out, and rub the rust off. This works extremely well for surface rust only. Pitted rust is not nearly as easy to deal with. Same fork socks and fender struts after the aluminum magic treatment...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#21
Full Member
Thread Starter
Join Date: Jan 2015
Location: Grass Valley, Ca
Posts: 387
Bikes: Surly Cross Check, Specialized Enduro Pro, Lemond Tourmalet
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 105 Post(s)
Liked 192 Times
in
94 Posts
Yep! Planning on it. A gift to myself for overcoming a partial Achilles avulsion. The Pinarello brings back a great era for me…
if only it were the tri color like Grewal’s Olympic bike!
if only it were the tri color like Grewal’s Olympic bike!
Last edited by gorillimo; 05-29-22 at 07:07 PM.
Likes For teisco:
#23
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 4,870
Bikes: A few too many
Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1364 Post(s)
Liked 2,180 Times
in
1,183 Posts
I think that you will be amazed at the results that you will achieve using the above methods.
Post the results if you buy it and clean it up.
Best, Ben
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
Likes For xiaoman1:
#24
LBKA (formerly punkncat)
Join Date: Jan 2010
Location: Jawja
Posts: 4,299
Bikes: Spec Roubaix SL4, GT Traffic 1.0
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 2208 Post(s)
Liked 960 Times
in
686 Posts
There is a product called "Bombz Away" that is a polish specifically for aluminum. Generally used and found within motorcycle circles. It says it doesn't work for chrome, but in my own experience it does very well. I have used it on brass and other metals as well.
Quad 0 steel wool works fine but you must keep some manner of liquid and don't dig in, just gentle circular motion. As stated above, if there is pitting there is basically nothing to do.
Quad 0 steel wool works fine but you must keep some manner of liquid and don't dig in, just gentle circular motion. As stated above, if there is pitting there is basically nothing to do.
Likes For Juan Foote: