Notices
Classic and Vintage Bicycles: Whats it Worth? Appraisals. Use this subforum for all requests as to "How much is this vintage bike worth?"Do NOT try to sell it in here, use the Marketplaces.

Raleigh Professional

Old 06-17-22, 05:11 AM
  #1  
Mackers
Senior Member
Thread Starter
 
Join Date: Mar 2008
Posts: 568
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 191 Post(s)
Liked 174 Times in 139 Posts
Raleigh Professional

Serial # WD1000261, additionally the bottom bracket is marked with a 4 for hopefully size 54
Reynolds 531, pearlescent white with blue accents. Seatstay caps with Carlton engravings. Frame only, though no visible damage to the front of the bike.
Will need some work though with plenty of damage to the paint.

Any ideas as to age and value?
Mackers is offline  
Old 06-17-22, 06:14 AM
  #2  
TugaDude
Senior Member
 
TugaDude's Avatar
 
Join Date: Nov 2010
Posts: 3,511
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times in 447 Posts
My best guess is that it is a 1981 and produced in the Worksop England plant. Raleigh began the longer serial numbers with the 2 letter prefix in 1973 from what I've read. The format on your bike matches that change. So it is no older than 1973, however the first number after the two letters is a "1" and it can't be 1971 because that serial number format wasn't in use yet. So that leaves 1981. The first number is the year of manufacture according to this and other resources I've read.

https://raleigh-sb4059.com/2018/08/3...ucts-division/

There is a lot of speculation about what the rest of the numbers mean. The article indicates there is no 100% reliable way to determine their exact meaning. There are "best guesses" but apparently they are only guesses.

We really need to see the bike before offering much in the way of value. The Professional was their top-of-the line for the average consumer. They did manufacture special frames for racing teams in a different unit, but I doubt this one is an example.
TugaDude is offline  
Old 06-17-22, 07:50 AM
  #3  
Mackers
Senior Member
Thread Starter
 
Join Date: Mar 2008
Posts: 568
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 191 Post(s)
Liked 174 Times in 139 Posts
Mackers is offline  
Likes For Mackers:
Old 06-17-22, 10:02 AM
  #4  
wrk101
Thrifty Bill
 
wrk101's Avatar
 
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,572

Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more

Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 957 Times in 624 Posts
And the fork is? Without original fork, I would cut value in half.
__________________
Please don't confuse ebay "asking" prices with "selling" prices. Many sellers never get their ask price. some are far from it. Value is determined once an item actually SELLS. Its easy enough to check SOLD prices.
wrk101 is offline  
Old 06-17-22, 10:19 AM
  #5  
Mackers
Senior Member
Thread Starter
 
Join Date: Mar 2008
Posts: 568
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 191 Post(s)
Liked 174 Times in 139 Posts
Frame only, though no visible damage to the front of the frame.

Last edited by Mackers; 06-17-22 at 10:53 AM.
Mackers is offline  
Old 06-17-22, 04:26 PM
  #6  
TugaDude
Senior Member
 
TugaDude's Avatar
 
Join Date: Nov 2010
Posts: 3,511
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times in 447 Posts
Found a thread about a similar bike. It shows what style fork came on the frameset. According to the thread this may have been a bike sold in Europe and not the U.S. It certainly isn't in the U.S. catalog.

https://www.bikeforums.net/classic-v...fessional.html
TugaDude is offline  
Old 06-17-22, 08:21 PM
  #7  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
The graphics on this look a lot like the graphics on a 1980 Raleigh Record Ace I picked up recently. It too was sold in Europe and not the US.
bikemig is offline  
Likes For bikemig:
Old 06-19-22, 05:13 AM
  #8  
Mackers
Senior Member
Thread Starter
 
Join Date: Mar 2008
Posts: 568
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 191 Post(s)
Liked 174 Times in 139 Posts
I am not in the US and neither is the frame.

Any thoughts on value?
Mackers is offline  
Old 06-19-22, 06:36 AM
  #9  
JulesCW 
Senior Member
 
Join Date: Aug 2012
Location: Upper third of the central USA
Posts: 673

Bikes: N+1

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 222 Post(s)
Liked 618 Times in 311 Posts
Originally Posted by Mackers
I am not in the US and neither is the frame.

Any thoughts on value?
Where are you? That will likely make some difference in value. I would expect a frame similar to this (condition issues, some rust, poor paint) without fork in the USA in a major metro area or on eBay to sell for about $75-$150. With fork perhaps as much as $250. Your local market may be and/or is likely different. Are you buying or selling? What happened to the fork? If buying I'd want to check the frame VERY carefully for any signs of crash damage -- no fork raises questions.
JulesCW is offline  
Old 06-19-22, 06:40 AM
  #10  
TugaDude
Senior Member
 
TugaDude's Avatar
 
Join Date: Nov 2010
Posts: 3,511
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times in 447 Posts
As it sits it is incomplete. Finding a matching fork is possible but could be a lengthy search and will likely be a different color. That would pretty much eliminate any ideas of leaving the patina of the frame I would think. I guess you could paint the fork and hope it matches.

So what I'm saying is unless you were to get really lucky it is going to be more work.

As far as value, the way I would approach it is to first determine what you want to do with it. Were you looking to repaint it anyway? Then the fork issue is more amenable. Or were you going to leave the original paint? If so, what about the top tube? That looks pretty bad compared to the rest. I guess there was considerable rust there and someone painted it. That's what it looks like anyways.

On the plus side, you don't see many of them and it was a quality build. I love window lugs so there's that.

At the end of the day what really matters is what it is worth to you and only you know the vision you have for it, so you will need to assess that.

Personally, if I were going for a repaint I probably wouldn't offer much more than $100.00 for the frame. If it had the fork, then I might go higher, but still, not much more. A quality repaint, to put it back the way it is, with pinstriping, decals, etc, will be expensive.

Sorry I couldn't be more help, but good luck whatever you decide.
TugaDude is offline  
Likes For TugaDude:
Old 06-19-22, 07:40 PM
  #11  
Kabuki12
Senior Member
 
Join Date: Jan 2016
Posts: 3,405
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 863 Post(s)
Liked 2,226 Times in 1,249 Posts
I know it isn’t apples to apples , but for a baseline, I bought a 1978 Raleigh Pro that needs a paint job. Last year I saw an ad for it on CL for $150 and it was frame, fork with Campagnolo headset, and BB. I inspected the frame and it was in good shape except of course for the paint. I bought it and am still in the build process . I will ride it for a while and if I like it , will have it repainted.

As purchased 1978 Raleigh Professional
Kabuki12 is offline  
Likes For Kabuki12:
Old 06-19-22, 09:26 PM
  #12  
TugaDude
Senior Member
 
TugaDude's Avatar
 
Join Date: Nov 2010
Posts: 3,511
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times in 447 Posts
Originally Posted by Kabuki12
I know it isn’t apples to apples , but for a baseline, I bought a 1978 Raleigh Pro that needs a paint job. Last year I saw an ad for it on CL for $150 and it was frame, fork with Campagnolo headset, and BB. I inspected the frame and it was in good shape except of course for the paint. I bought it and am still in the build process . I will ride it for a while and if I like it , will have it repainted.

As purchased 1978 Raleigh Professional
That is a worthy candidate for refinishing. The Mink Blue was one of my favorite bike colors ever.
TugaDude is offline  
Likes For TugaDude:
Old 06-20-22, 06:46 AM
  #13  
Kabuki12
Senior Member
 
Join Date: Jan 2016
Posts: 3,405
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 863 Post(s)
Liked 2,226 Times in 1,249 Posts
^^^ Yea, it kind of reminds me of my Electric Blue Mini Cooper I had years ago!
Kabuki12 is offline  
Old 07-16-22, 08:56 AM
  #14  
jaysailor
Newbie
 
Join Date: Jun 2022
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 6 Times in 5 Posts
25 years ago, I found one of these for sale with full Campy Record for $75. The frame was dirty, but nice, and way too big for me, I stripped it down cleaned up the frame and components, sold the frame for $50, and then used the Campy to build up a nice $120 used Serotta frame (too small for me) that I sold for around $400.
jaysailor is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.