Thru axles and standard sizes - a cautionary tale
#1
Senior Member
Thread Starter
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,880
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1461 Post(s)
Liked 1,485 Times
in
870 Posts
Thru axles and standard sizes - a cautionary tale
I somehow managed to strip out the allen bolt head on one of my thru-axles. (yes... user error) Thankfully the stock thru-axle has a 5mm head on both sides, so I was able to unscrew it from the other side. I figured this should be replaced (you know... before I do the same thing to the other side), so I dial up the interwebs and type in 12x100mm thru axle and find a bunch of results. I'm about to smash the buy button on some random Amazon listing, when I notice there are different actual lengths, oh and also different thread pitches, different spacers/washers, etc. Wow.
Anyway, specs on thru-axles aren't particularly easy to find online. I found this website: https://robertaxleproject.com/ that seems like a good option, made in USA. They've got a tool that will help determine exactly what size thru-axle you need. I also learned during this process that if you pull out the thru axle, it probably has printing on it that indicates the actual size, and thread pitch. Also worth noting that my front and rear axles have different thread pitches, and the rear uses a conical washer, where the front uses a flat washer.
TLDR; if you need a new thru axle, be sure to confirm size and maybe ask your LBS for specs before buying, or check out Robert Axle Project.
Anyway, specs on thru-axles aren't particularly easy to find online. I found this website: https://robertaxleproject.com/ that seems like a good option, made in USA. They've got a tool that will help determine exactly what size thru-axle you need. I also learned during this process that if you pull out the thru axle, it probably has printing on it that indicates the actual size, and thread pitch. Also worth noting that my front and rear axles have different thread pitches, and the rear uses a conical washer, where the front uses a flat washer.
TLDR; if you need a new thru axle, be sure to confirm size and maybe ask your LBS for specs before buying, or check out Robert Axle Project.
Likes For msu2001la:
#2
Senior Member
Join Date: May 2021
Location: San Francisco
Posts: 2,038
Bikes: addict, aethos, creo, vanmoof, sirrus, public ...
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1277 Post(s)
Liked 1,392 Times
in
710 Posts
I somehow managed to strip out the allen bolt head on one of my thru-axles. (yes... user error) Thankfully the stock thru-axle has a 5mm head on both sides, so I was able to unscrew it from the other side. I figured this should be replaced (you know... before I do the same thing to the other side), so I dial up the interwebs and type in 12x100mm thru axle and find a bunch of results. I'm about to smash the buy button on some random Amazon listing, when I notice there are different actual lengths, oh and also different thread pitches, different spacers/washers, etc. Wow.
Anyway, specs on thru-axles aren't particularly easy to find online. I found this website: https://robertaxleproject.com/ that seems like a good option, made in USA. They've got a tool that will help determine exactly what size thru-axle you need. I also learned during this process that if you pull out the thru axle, it probably has printing on it that indicates the actual size, and thread pitch. Also worth noting that my front and rear axles have different thread pitches, and the rear uses a conical washer, where the front uses a flat washer.
TLDR; if you need a new thru axle, be sure to confirm size and maybe ask your LBS for specs before buying, or check out Robert Axle Project.
Anyway, specs on thru-axles aren't particularly easy to find online. I found this website: https://robertaxleproject.com/ that seems like a good option, made in USA. They've got a tool that will help determine exactly what size thru-axle you need. I also learned during this process that if you pull out the thru axle, it probably has printing on it that indicates the actual size, and thread pitch. Also worth noting that my front and rear axles have different thread pitches, and the rear uses a conical washer, where the front uses a flat washer.
TLDR; if you need a new thru axle, be sure to confirm size and maybe ask your LBS for specs before buying, or check out Robert Axle Project.
Likes For mschwett:
#3
ignominious poltroon
Join Date: Jan 2022
Posts: 4,036
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2239 Post(s)
Liked 3,434 Times
in
1,797 Posts
If they don't list your bike on the website, they have actual friendly and helpful humans, too.
(Almost makes me want to move to Bend, but I saw a bumper sticker that says it sucks and not to move there.)
(Almost makes me want to move to Bend, but I saw a bumper sticker that says it sucks and not to move there.)
Likes For rosefarts:
#5
Obsessed with Eddington
Join Date: Jun 2013
Location: Brussels (BE) 🇧🇪
Posts: 1,330
Bikes: '16 Spesh Diverge, '14 Spesh Fatboy, '18 Spesh Epic, '18 Spesh SL6, '21 Spesh SL7, '21 Spesh Diverge...and maybe n+1?
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 532 Post(s)
Liked 621 Times
in
368 Posts
#6
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
Yup. I came across RAP (and the multiple TA lengths and thread pitches) a handful of years ago when I was in need of a TA for a wheel-on trainer. I went back to them when my new-at-the-time bike came with some ****** quick release TAs and I wanted to replace them with conventional TAs.
#7
For The Fun of It
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,852
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2135 Post(s)
Liked 1,646 Times
in
828 Posts
I am glad thru-axles have become the norm in the industry. With all the problems QR axles had you know.
#8
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
I fail to understand why they didn't come up with a through axle standard. I guess I understand the different lengths to some extent, given that they are part of the frame/fork. But still, they could have agreed on a thread pitch.
Likes For unterhausen:
#9
Senior Member
Thread Starter
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,880
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1461 Post(s)
Liked 1,485 Times
in
870 Posts
Reminds me of a story someone once told me about a 1980's era Ferrari where the shop discovered that a body panel on the drivers' side used metric sized hardware, but the identical part on the passenger side was all threaded for imperial size bolts.