Off Topic A question on another use for electronics solder.
#1
Senior Member
Thread Starter
Off Topic A question on another use for electronics solder.
Hello,long time no talk to.🤗
I am wondering if electronics solder would meld with a thin rod of weldable steel. I am making large sewing needles. Usually I drill out and shape the eye with a dremmel. That won't work here. So I have to bend the rod into an oblong and sodder the end to the shaft. Other folks leave the small space open. It just looks unfinished to me. I would also hate for it to catch on important work.
I am wondering if electronics solder would meld with a thin rod of weldable steel. I am making large sewing needles. Usually I drill out and shape the eye with a dremmel. That won't work here. So I have to bend the rod into an oblong and sodder the end to the shaft. Other folks leave the small space open. It just looks unfinished to me. I would also hate for it to catch on important work.
Last edited by PdalPowr; 12-07-19 at 02:52 PM.
#3
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
I think epoxy might work better. It sounds like it's really just to fill space, not structural. I think you will have trouble soldering to steel though
#5
Junior Member
It should work. I have soldered plain carbon steel several times, most recently last week.
I always joined freshly cut/abraded parts, using the usual tin/lead multicore solder wire.
I always joined freshly cut/abraded parts, using the usual tin/lead multicore solder wire.
#6
Senior Member
Thread Starter
Well since there was a few different opinions I will try it.
No harm in getting sodder in there if it doesn't work.
I can always desodder and degrease before trying epoxy.
It may take a while but I will try to get a picture up of the finished needle.
If it works I will try making a needle with a bike spoke.
Its fun making kit from scratch. 😉
No harm in getting sodder in there if it doesn't work.
I can always desodder and degrease before trying epoxy.
It may take a while but I will try to get a picture up of the finished needle.
If it works I will try making a needle with a bike spoke.
Its fun making kit from scratch. 😉
#8
Senior Member
Join Date: Sep 2005
Location: Michigan
Posts: 3,706
Bikes: Trek 730 (quad), 720 & 830, Bike Friday NWT, Brompton M36R & M6R, Dahon HAT060 & HT060, ...
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 840 Post(s)
Liked 336 Times
in
251 Posts
For steel, especially stainless like in the spokes, I use muriatic acid or dedicated flux for cleaning and silver solder. The Harris Stay-Clean and Stay-Brite are the easiest combination. Bike applications include preventing cable ends from fraying and modifying derailleur cages.
#9
Senior Member
Thread Starter
#10
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,502
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,464 Times
in
1,433 Posts
It is spelled solder and pronounced solder. I'm not sure why. I'm sure there's a long story to it. English is the only language that requires you to take a spelling class through 8th grade.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#11
Senior Member
Thread Starter
I was the only english student and not allowed to speak english at all.
For the longest time I didn't know many of the tech terms in english.
I learned trigonometry in french which is an even more screwed up language than english.🤗😉🤗
#12
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,271
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 4254 Post(s)
Liked 1,354 Times
in
940 Posts
#13
Senior Member
Thread Starter
#14
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,502
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,464 Times
in
1,433 Posts
Oops! I meant to type that it's spelled solder and pronounced sodder. I agree, no one in the US pronounces it as it is spelled.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.