ISO and for trade thread part 5
#4701
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,579
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1442 Post(s)
Liked 1,059 Times
in
784 Posts
My complete FD is a Cyclone MK11 and in "nearly new" condition, except for some inner cage scuffing, even comes with a copy of the "Operation Manual", which is nothing but a single printed sheet! I did a quick measure to confirm the clamp is a 28.6.
BTW, Oddly I also have a Shimano Deore XT that has a similar "continuous band" clamp (but is 31.X) and never really compared them until now. The bands look very similar but the anchor hardware is different and does not look like any of it could swap...no surprise I guess.
BTW, Oddly I also have a Shimano Deore XT that has a similar "continuous band" clamp (but is 31.X) and never really compared them until now. The bands look very similar but the anchor hardware is different and does not look like any of it could swap...no surprise I guess.
#4702
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
My complete FD is a Cyclone MK11 and in "nearly new" condition, except for some inner cage scuffing, even comes with a copy of the "Operation Manual", which is nothing but a single printed sheet! I did a quick measure to confirm the clamp is a 28.6.
BTW, Oddly I also have a Shimano Deore XT that has a similar "continuous band" clamp (but is 31.X) and never really compared them until now. The bands look very similar but the anchor hardware is different and does not look like any of it could swap...no surprise I guess.
BTW, Oddly I also have a Shimano Deore XT that has a similar "continuous band" clamp (but is 31.X) and never really compared them until now. The bands look very similar but the anchor hardware is different and does not look like any of it could swap...no surprise I guess.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4703
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
Unworthy, and Jdawg,
I am hoping someone might have just the band. I don't want to tear apart a good FD for just a clamp. I think both models use the same band, so I will wait to see if just the band pops up. I sifted through two boxes of parts at the co-op with no good results. I'm leaning toward giving my Trek 830 mt .bike to the co-op. It weighs a ton and would cost over $100 to ship to a forum member, so the co-op wins the battle. Smiles, MH
I am hoping someone might have just the band. I don't want to tear apart a good FD for just a clamp. I think both models use the same band, so I will wait to see if just the band pops up. I sifted through two boxes of parts at the co-op with no good results. I'm leaning toward giving my Trek 830 mt .bike to the co-op. It weighs a ton and would cost over $100 to ship to a forum member, so the co-op wins the battle. Smiles, MH
#4704
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
Unworthy, and Jdawg,
I am hoping someone might have just the band. I don't want to tear apart a good FD for just a clamp. I think both models use the same band, so I will wait to see if just the band pops up. I sifted through two boxes of parts at the co-op with no good results. I'm leaning toward giving my Trek 830 mt .bike to the co-op. It weighs a ton and would cost over $100 to ship to a forum member, so the co-op wins the battle. Smiles, MH
I am hoping someone might have just the band. I don't want to tear apart a good FD for just a clamp. I think both models use the same band, so I will wait to see if just the band pops up. I sifted through two boxes of parts at the co-op with no good results. I'm leaning toward giving my Trek 830 mt .bike to the co-op. It weighs a ton and would cost over $100 to ship to a forum member, so the co-op wins the battle. Smiles, MH
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4705
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,846
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2297 Post(s)
Liked 2,054 Times
in
1,254 Posts
Unworthy, and Jdawg,
I am hoping someone might have just the band. I don't want to tear apart a good FD for just a clamp. I think both models use the same band, so I will wait to see if just the band pops up. I sifted through two boxes of parts at the co-op with no good results. I'm leaning toward giving my Trek 830 mt .bike to the co-op. It weighs a ton and would cost over $100 to ship to a forum member, so the co-op wins the battle. Smiles, MH
I am hoping someone might have just the band. I don't want to tear apart a good FD for just a clamp. I think both models use the same band, so I will wait to see if just the band pops up. I sifted through two boxes of parts at the co-op with no good results. I'm leaning toward giving my Trek 830 mt .bike to the co-op. It weighs a ton and would cost over $100 to ship to a forum member, so the co-op wins the battle. Smiles, MH
#4706
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
Oooo...that I might have. Thanks!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4708
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
ISO / looking for a 90 degree stem, like a Nitto Dynamic II, or similar.
90mm reach would be perfect, but will also consider 100mm (or 95mm if such a thing exists)
Silver preferred, but will consider black finish.
Not too concerned about clamp diameter, 25.4, 26, 26.4 are all fine with me.
22.2 insertion.
I have other stems and parts available for trade, or will buy outright.
Velobase image:
90mm reach would be perfect, but will also consider 100mm (or 95mm if such a thing exists)
Silver preferred, but will consider black finish.
Not too concerned about clamp diameter, 25.4, 26, 26.4 are all fine with me.
22.2 insertion.
I have other stems and parts available for trade, or will buy outright.
Velobase image:
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4709
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,579
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1442 Post(s)
Liked 1,059 Times
in
784 Posts
I will look for a stand-alone clamp from shifters, too, but that's another long shot.
#4710
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
@hazetguy and @Mad Honk
Jdawg has failed miserably. I have a pretty organized stash, and I cannot find either of the items. Must have given them away/used them/lost them in the hidden trove of lost parts.
Sorry.
Jdawg has failed miserably. I have a pretty organized stash, and I cannot find either of the items. Must have given them away/used them/lost them in the hidden trove of lost parts.
Sorry.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4711
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
Well Jdawg,
Don't be too hard on yerself as I knew I was asking for unobtainium. I have been working on the Pinarello pantograph and forgot how tough it is to get the paint fill into the crevices without going over the panto's a few times each. Tonight was the last go round with the tulips on the brake bridges. Greg's decals are next and then the clear coat. I have exhausted my supply of lacquer clear coat and I'm going to start using PPG as I have a supplier for those auto coatings. It is going to be a good experiment to find one that gives the luster without any decal damage. The black over silver champagne appears to be a good choice as I like the look of the older Cinelli frames. Smiles, MH
Don't be too hard on yerself as I knew I was asking for unobtainium. I have been working on the Pinarello pantograph and forgot how tough it is to get the paint fill into the crevices without going over the panto's a few times each. Tonight was the last go round with the tulips on the brake bridges. Greg's decals are next and then the clear coat. I have exhausted my supply of lacquer clear coat and I'm going to start using PPG as I have a supplier for those auto coatings. It is going to be a good experiment to find one that gives the luster without any decal damage. The black over silver champagne appears to be a good choice as I like the look of the older Cinelli frames. Smiles, MH
#4712
Senior Member
Looking for Schwinn parts. Ashtabula crank without the chainring or BB bits in 165/170 length. Some shine to it would be good. Next would be some black Schwinn Approved grips either standard or bubble top ones would be fine.
Thanks for consideration and as always, what do you need?
Thanks for consideration and as always, what do you need?
#4714
Full Member
ISO alloy seat post for Dawes Galaxy
Looking for a 26.2mm seat post to replace the chrome steel one on my 72 Dawes Galaxy. Can anything from an English bike of the same era be fitted?
#4715
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
https://www.ebay.com/itm/25528473195...cAAOSwxPBhveI-
If you can find an era specific seat post smaller than 26.2 that is allow, you could use a shim, I guess.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4716
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,433
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,047 Times
in
542 Posts
ISO seatposts seems to be a thing so….
- 26.4
- 26.6
200mm-ish should do the trick.
Don’t need to be fancy/mint. Not TOO badly scraped up is entirely acceptable.
- 26.4
- 26.6
200mm-ish should do the trick.
Don’t need to be fancy/mint. Not TOO badly scraped up is entirely acceptable.
#4717
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,433
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 566 Post(s)
Liked 1,047 Times
in
542 Posts
Looking for Schwinn parts. Ashtabula crank without the chainring or BB bits in 165/170 length. Some shine to it would be good. Next would be some black Schwinn Approved grips either standard or bubble top ones would be fine.
Thanks for consideration and as always, what do you need?
Thanks for consideration and as always, what do you need?
#4718
Old bikes, Older guy
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 841
Bikes: A few modern, Several vintage, All ridden when weather allows.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 250 Post(s)
Liked 165 Times
in
114 Posts
ISO Sora 3300 left side double STI shifter/Lever
Hi folks,
I need a Sora 3300 left, double STI shifter. It’s the style with the little lever on the side, not the one with the big lever under the brake lever. See picture. For trade I have a Claris 2400 right 8 speed STI shifter, or a 105 left double that’s a bit scruffy, or a Sora 7 speed right STI shifter. Also have a bunch of other vintage parts.
Thanks and regards,
Van
I need a Sora 3300 left, double STI shifter. It’s the style with the little lever on the side, not the one with the big lever under the brake lever. See picture. For trade I have a Claris 2400 right 8 speed STI shifter, or a 105 left double that’s a bit scruffy, or a Sora 7 speed right STI shifter. Also have a bunch of other vintage parts.
Thanks and regards,
Van
__________________
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Last edited by Senior Ryder 00; 03-13-22 at 09:26 PM. Reason: Add picture
#4719
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
Any particular flavor you prefer? I have several possibilities in 26.4 I can check on...likely SR versions.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For RustyJames:
#4721
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
I'll check in tonight or maybe tomorrow, if that is okay.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4722
Full Member
Can you chaeck your stock for 26.4mm for me as well? I'm told that is about the range for a Dawes fitting. Although the steel post on my bike measured 26.2, I can always polish something down to fir if I had to
#4724
Full Member
Join Date: Apr 2019
Location: Denver Metro, CO
Posts: 392
Bikes: 1972 Fuji The Finest | 1990 Bianchi Giro | 1999 LeMond Buenos Aires
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 303 Times
in
134 Posts
RJ and @swampyankee2 - I should have a 26.4 SR Laprade also gathering dust. PM me this coming weekend and I’ll check (away from my stuff until then).
#4725
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
Two outside ones are the 26.4s I knew I had. The others are 26.2. The Shogun one is obviously MORE modern.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super