High-low hubs, low-high hubs?
#1
Senior Member
Thread Starter
High-low hubs, low-high hubs?
Hi,
So there's a history of hi-lo rear hubs with larger drive side flange that is intended to, supposedly, improve the bracing angle on rear wheels. I guess Jobst Brandt made a strong case that it doesn't really accomplish that. Anyway, I'm looking at this All City hub that has a larger flange on the NON-drive side. I believe this is especially out of the ordinary. What is the reason for this? Picture of the hub in question below.
Thanks
So there's a history of hi-lo rear hubs with larger drive side flange that is intended to, supposedly, improve the bracing angle on rear wheels. I guess Jobst Brandt made a strong case that it doesn't really accomplish that. Anyway, I'm looking at this All City hub that has a larger flange on the NON-drive side. I believe this is especially out of the ordinary. What is the reason for this? Picture of the hub in question below.
Thanks
#2
Senior Member
Thread Starter
p.s. usually the larger flange is on the drive side, so I'm confused by this All City hub
#3
Really Old Senior Member
We've got bling and we know how to show it? (ZZ Top)
Likes For Bill Kapaun:
Likes For tFUnK:
#5
Senior Member
Thread Starter
#7
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,182
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 889 Post(s)
Liked 906 Times
in
534 Posts
While Jobst Brandt literally wrote the book, he's not the only one who ever engineered a bicycle wheel.
Two possible reasons for All-City to go with a tall NDS flange:
The "practical" would be to get the spoke hole circle clear of the brake rotor mounting ears..
More likely though, is just for style: All-City's signature is steel -framed neo-retro urban FG/SS bikes. They have two different high-flange 'track' hub sets, a 6-slot and a 5-star "Sheriff" hub. I'm pretty sure the high flange on the hub that's got you so confused is the same slotted pattern as the track hubs.
Sometimes, you do something just for the style, Mr Petersen.
Two possible reasons for All-City to go with a tall NDS flange:
The "practical" would be to get the spoke hole circle clear of the brake rotor mounting ears..
More likely though, is just for style: All-City's signature is steel -framed neo-retro urban FG/SS bikes. They have two different high-flange 'track' hub sets, a 6-slot and a 5-star "Sheriff" hub. I'm pretty sure the high flange on the hub that's got you so confused is the same slotted pattern as the track hubs.
Sometimes, you do something just for the style, Mr Petersen.
#8
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,354
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,946 Times
in
1,906 Posts
for disc; to reduce adding more spokes on the NDS & to achieve a higher tension, the taller NDS flange shortens the spoke & [in theory] reduces fatigue.
I wonder if there was a production disc wheel that had equal spoke count & flange height, but used thicker gaged spokes (to include nipples) on the NDS?
Personally, I would rather have both sides with tall flanges for a 700C disc carbon wheel. I'll have one less donut to offset the weight penalty.
I wonder if there was a production disc wheel that had equal spoke count & flange height, but used thicker gaged spokes (to include nipples) on the NDS?
Personally, I would rather have both sides with tall flanges for a 700C disc carbon wheel. I'll have one less donut to offset the weight penalty.
__________________
-Oh Hey!
-Oh Hey!