I’m starting to understand the beauty of rear derailleurs.
#1
Full Member
Thread Starter
Join Date: Oct 2020
Location: Portland
Posts: 357
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Likes: 0
Liked 267 Times
in
98 Posts
I’m starting to understand the beauty of rear derailleurs.
Since it’s been hot I have been waking up early, and this morning I noticed this set for $30 on CL which had been posted at 6 am. Luckily the guy was driving through my town and meet me a few minutes from my house this evening. Apparently he has close to 3,000 bikes and is trying to get rid of stuff. Since I picked up my 85 Schwinn Voyageur with a non original rear derailleur, I’ve been reading up on older long cage stuff that would fit my bike. I picked up a V-GT Luxe for $10 and that should be more than I need, but I felt it would have been foolish of me to pass this set up. It is quite pretty.
Likes For Lbxpdx:
#2
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,536
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 930 Post(s)
Liked 1,291 Times
in
487 Posts
That was a steal! Looks like it has Bullseye pulleys too...double steal!
Likes For davester:
Likes For P!N20:
#4
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26413 Post(s)
Liked 10,379 Times
in
7,207 Posts
.
...if you get a chance, you should try to get this and read it.
...if you get a chance, you should try to get this and read it.
__________________
#5
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I'm trying to picture the reasoning that starts with having 3000 bikes and ends with selling a couple of derailleurs for $30. I wish I could say I can't imagine it, but it sounds a bit too much like something I'd do. "Well, I guess I don't need these...."
__________________
My Bikes
My Bikes
Likes For Andy_K:
#6
Full Member
Thread Starter
Join Date: Oct 2020
Location: Portland
Posts: 357
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Likes: 0
Liked 267 Times
in
98 Posts
He said he posted the derailleur sets, I bought a Shimano XT set too, from bent frames he was scraping. I don’t know the guy from atom, but he definitely knew his 80’s/90’s stuff. He made it sound like he just wanted to get rid of stuff. If I can buy 5 bikes in two weeks, sell two that pay for all of them and have three “free” bikes, I can see how someone could accumulate tons of bikes if the price is cheap over a few decades.
#7
Senior Member
Join Date: Oct 2015
Location: SE Wisconsin
Posts: 774
Bikes: Trek 970, Bianchi Volpe,Casati
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 357 Post(s)
Liked 122 Times
in
87 Posts
Wow, 3000 bikes !!??
He better start selling.. even if the average is only like 200 each that's a ton of money $$
He better start selling.. even if the average is only like 200 each that's a ton of money $$
#8
Senior Member
Join Date: Jan 2016
Posts: 3,448
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 874 Post(s)
Liked 2,287 Times
in
1,278 Posts
I think the first generation Cyclone is one of the best looking rear derailleurs , as well as the Campy Nuovo Record. The Cyclone GT is great because it has a better touring range and it shifts as good as anything that was available , better than most. I just scored a blackened one that will go on my touring bike.
Likes For Kabuki12:
#9
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 844
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 297 Post(s)
Liked 675 Times
in
340 Posts
I'm using a Cyclone Mk2 GT RD because if you file down the adjuster stop it will shift 8 gears
Polished off the horrible black lettring though, and installed a Mk1 FD for the looks.
Polished off the horrible black lettring though, and installed a Mk1 FD for the looks.
#10
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,494
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 697 Times
in
393 Posts
For me, the VX is perhaps most visually appealing. I have numerous GTs and also the wonderful mid cage length S model.
I like the hidden limit screws that let the beauty of that embossed parallelogram outer arm stand proud. I even like the simple beauty of the form follows function cable routing and the elegantly cast cable routing trough in the outer knuckle. It doesn’t hurt also that these are light, smooth shifting, highly reliable, and inexpensive.
I like the hidden limit screws that let the beauty of that embossed parallelogram outer arm stand proud. I even like the simple beauty of the form follows function cable routing and the elegantly cast cable routing trough in the outer knuckle. It doesn’t hurt also that these are light, smooth shifting, highly reliable, and inexpensive.
Likes For sd5782:
#11
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1955 Post(s)
Liked 3,661 Times
in
1,679 Posts
For me, the VX is perhaps most visually appealing. I have numerous GTs and also the wonderful mid cage length S model.
I like the hidden limit screws that let the beauty of that embossed parallelogram outer arm stand proud. I even like the simple beauty of the form follows function cable routing and the elegantly cast cable routing trough in the outer knuckle. It doesn’t hurt also that these are light, smooth shifting, highly reliable, and inexpensive.
I like the hidden limit screws that let the beauty of that embossed parallelogram outer arm stand proud. I even like the simple beauty of the form follows function cable routing and the elegantly cast cable routing trough in the outer knuckle. It doesn’t hurt also that these are light, smooth shifting, highly reliable, and inexpensive.
#12
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
He said he posted the derailleur sets, I bought a Shimano XT set too, from bent frames he was scraping. I don’t know the guy from atom, but he definitely knew his 80’s/90’s stuff. He made it sound like he just wanted to get rid of stuff. If I can buy 5 bikes in two weeks, sell two that pay for all of them and have three “free” bikes, I can see how someone could accumulate tons of bikes if the price is cheap over a few decades.
__________________
My Bikes
My Bikes
#13
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,623
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3886 Post(s)
Liked 6,480 Times
in
3,206 Posts
I "understood the beauty" after acquiring (and overhauling) my first Nuovo Record rd.
Likes For SurferRosa:
#14
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,478
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 965 Post(s)
Liked 1,629 Times
in
1,045 Posts
I'll pass on the Snow Cones Momma... Gimmi Gimmi Please...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#15
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,904
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,928 Times
in
2,553 Posts
Timely thread! I just picked up a Pro Miyata frame from a forumite. MId-'80s race bike. A thoroughbred. And parts box special. I believe this was an all Superbe bike and my stock of working Superbe is weak. So it's got super short Cyclone calipers (with the pads pushed all the way up. 25c fits but getting the rear wheel in is hard! 24c is biggest feasible in back.
Crankset - triple 175 52-42-30 Campy in good shape! A newer like new Cyclone FD. Cyclone GT in very good shape. (I'm a sucker. See those Cyclones hiding out in display cases with like the old prices and I'm in any time. Won't need it in this lifetime? With luck, I'll get a second chance.)
Threw that stuff on. And like I always remembered about that Cyclone derailleur stuff - it works and is so easy to work! Adjusted the chain to the 24t (so I thought) FW with a little spare in the big-big. Small-small worked like a charm. Rode it. Everything perfect - except that's not 24! (12-21; what I used to race 4 1/2 decades ago with one more cog in each direction.) This morning I threw a SunRace 13-24 on. Works beautifully (but the 26 on the Sachs I wanted to use is a complete big-big no-go.)
Shifting yesterday on the 21 out "in the field" was race-day superbe. In all combos. I'm guessing the 24 will be virtually the same. (Used to race the 19, using a 23 I threw together for Smuggler's Notch. The small cage Cyclone didn't care.
SunTour Cyclones - game changers, Yes, SunTour already had the geometry dialed with the V-GT Lux but the racing scene could not ignore the Cyclone RD. Much better shifting and considerably lighter than any other manufacturer out there. No bad habits. Nothing quirky. Shifting on the biggest and smallest chainrings - identical. Didn't hurt that it looked light, clean and elegant. (Oh, and after crashes, go find a crashed Cyclone with the other half trashed. Almost always, crash damage was either cage or parallelogram, not both. Easy to take apart and swap.) And still, those Cyclone are a joy to ride! (Well, as long as you can live without that index thing.)
Crankset - triple 175 52-42-30 Campy in good shape! A newer like new Cyclone FD. Cyclone GT in very good shape. (I'm a sucker. See those Cyclones hiding out in display cases with like the old prices and I'm in any time. Won't need it in this lifetime? With luck, I'll get a second chance.)
Threw that stuff on. And like I always remembered about that Cyclone derailleur stuff - it works and is so easy to work! Adjusted the chain to the 24t (so I thought) FW with a little spare in the big-big. Small-small worked like a charm. Rode it. Everything perfect - except that's not 24! (12-21; what I used to race 4 1/2 decades ago with one more cog in each direction.) This morning I threw a SunRace 13-24 on. Works beautifully (but the 26 on the Sachs I wanted to use is a complete big-big no-go.)
Shifting yesterday on the 21 out "in the field" was race-day superbe. In all combos. I'm guessing the 24 will be virtually the same. (Used to race the 19, using a 23 I threw together for Smuggler's Notch. The small cage Cyclone didn't care.
SunTour Cyclones - game changers, Yes, SunTour already had the geometry dialed with the V-GT Lux but the racing scene could not ignore the Cyclone RD. Much better shifting and considerably lighter than any other manufacturer out there. No bad habits. Nothing quirky. Shifting on the biggest and smallest chainrings - identical. Didn't hurt that it looked light, clean and elegant. (Oh, and after crashes, go find a crashed Cyclone with the other half trashed. Almost always, crash damage was either cage or parallelogram, not both. Easy to take apart and swap.) And still, those Cyclone are a joy to ride! (Well, as long as you can live without that index thing.)
#16
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,635
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,796 Times
in
2,282 Posts
2nd lightest, and IMO 2nd prettiest derailleur of all time. Huret Jubilee is lightest and prettiest in my book, but a Cyclone will outshift it 6 days a week and twice on Sunday.
GT Version on my Centurion Pro Tour
GT Version on my Centurion Pro Tour
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#17
Classic, Vintage Mechanic
Join Date: Feb 2017
Location: Vancouver B.C. Canada
Posts: 117
Bikes: '65 Legnano Gran Primeo || '76 Holdsworth Mistral || '82 Specialized Stumpjumper
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 40 Times
in
25 Posts
I'll join the club, 1st. gen. Campag Rally
Likes For d_dutchison:
#18
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,434
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 983 Post(s)
Liked 632 Times
in
403 Posts
Never ridden one but, aesthetically, that would head my list. Huret Jubilee a close second.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#19
Junior Member
Join Date: Aug 2019
Location: Copenhagen, Denmark
Posts: 77
Bikes: 1991 Centurion Oxygen, 1997 Centurion Invincible, 1995+- Fondriest Wind, 1982 Grand Master Nissan Pro 2000, 1992 Olmo Racing (The racing part of the name HAS to be a joke).
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 30 Times
in
20 Posts
Actually the same generation Superbe Pro was only 169,5 gram, so the Cyclone was not the second lightest.
#20
Senior Member
Join Date: Nov 2015
Posts: 4,485
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1639 Post(s)
Likes: 0
Liked 829 Times
in
538 Posts
Campy,s Super Record RD is just the C&V bike world's typical ultimate RD spec and aesthetics. And I agree......
Campagnolo Super Record RD with Ti pivot bolts on my 83 Davidson Signature.
But other very different C&V RDs look just as good or better to me, like the Mavic SSC.
It's a very beautiful example of modern industrial art design.
Mavic 851 SSC RD on my 86 Alan Record Carbonio.
Campagnolo Super Record RD with Ti pivot bolts on my 83 Davidson Signature.
But other very different C&V RDs look just as good or better to me, like the Mavic SSC.
It's a very beautiful example of modern industrial art design.
Mavic 851 SSC RD on my 86 Alan Record Carbonio.
Last edited by Chombi1; 07-30-22 at 01:20 PM.
Likes For Chombi1:
#21
Senior Member
Join Date: Jul 2014
Location: New Zealand
Posts: 1,035
Bikes: 1963? Anquetil , 1973 PX10,1979 PX10,1984 PX10, VITUS 979 PX10DU,1970S ALAN,1985 PSV10,1980s PY10FC,1978 bERTIN,ALAN carbon
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 283 Post(s)
Liked 636 Times
in
283 Posts
I often wonder what Triplex were thinking when they made this ? (maybe they werent? )
No pretty ,just slightly looney !
No pretty ,just slightly looney !
Likes For 1simplexnut:
#22
Senior Member
Join Date: Sep 2006
Posts: 538
Bikes: Trek 400 Elance, Losa Winner, 1994 Schwinn Paramount, Specialized Tarmac Pro, Miele SLX, Ibis Ripley, Colnago Oval CX, 84 Masi GC, 1986 Schwinn Voyageur, 1988 Schwinn Tempo, 1998 Schwinn Peloton, 1991 Paramount Ser3
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 150 Post(s)
Liked 90 Times
in
55 Posts
Wish there was something like this for EVERY bikepart!
https://www.disraeligears.co.uk/site/home.html
https://www.disraeligears.co.uk/site/home.html
#23
Newbie
Here is my addition.....I think the Shimano 600 Arabesque is a beauty (currently running on my Raleigh International),
the Campy Nuovo Record is also combining beauty and function (currently resting with the rest of the groupset in my living room cabinet)
Beauty contest....Arabesque vs. Campy
the Campy Nuovo Record is also combining beauty and function (currently resting with the rest of the groupset in my living room cabinet)
Beauty contest....Arabesque vs. Campy
#24
Senior Member
Join Date: Sep 2017
Location: Hotel CA / DFW
Posts: 1,732
Bikes: 83 Colnago Super, 87 50th Daccordi, 79 & 87 Guerciotti's, 90s DB/GT Mtn Bikes, 90s Colnago Master and Titanio, 96 Serotta Colorado TG, 95/05 Colnago C40/C50, 06 DbyLS TI, 08 Lemond Filmore FG SS, 12 Cervelo R3, 20/15 Surly Stragler & Steamroller
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 601 Post(s)
Liked 779 Times
in
497 Posts
arabesque is style
plays and looks well with this stuff
Last edited by joesch; 07-31-22 at 07:25 AM.
#25
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 844
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 297 Post(s)
Liked 675 Times
in
340 Posts
Suntour Cyclone Mk2 GT with the script polished off and some (old) road rash.
And new BBB Rollerboys jockey wheels.
And new BBB Rollerboys jockey wheels.
Last edited by Aardwolf; 07-31-22 at 08:30 AM. Reason: Image reflected
Likes For Aardwolf: