Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Frame sizing on vintage bikes

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Frame sizing on vintage bikes

Old 08-10-22, 01:31 PM
  #1  
Lbxpdx
Full Member
Thread Starter
 
Join Date: Oct 2020
Location: Portland
Posts: 359
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Likes: 0
Liked 267 Times in 98 Posts
Frame sizing on vintage bikes

My recently purchased Schwinn VSP is a fun ride. Nimble with nothing in the bags, yet planted and comfortable when the bags are filled with groceries. It is a 21”, 21.5” top tube, 170mm cranks, 74 degree head/seat and 27” wheels. With the amount of stem and seatpost showing, it looks like the frame is too small for me, but when I bought the bike I also tried a 23” version and it was too big for me. My nice bike is 56/56, 73/73 with 650b and it fits quite nicely and looks proportionate.

I’m trying to figure out why this bike looks small though it fits perfectly the way it is set up. Would a dirtdrop stem make the bike look more proportional?



Lbxpdx is offline  
Likes For Lbxpdx:
Old 08-10-22, 01:36 PM
  #2  
52telecaster
ambulatory senior
 
52telecaster's Avatar
 
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347

Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.

Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,633 Times in 1,670 Posts
Looks pretty good to me. If you want the 23" your stand over might be too much. Personally I don't worry about stand over but it's not a bad thing to be aware of. If that works for you and you have enough stem insertion I think you're golden.
52telecaster is offline  
Likes For 52telecaster:
Old 08-10-22, 01:38 PM
  #3  
icemilkcoffee 
Senior Member
 
icemilkcoffee's Avatar
 
Join Date: Aug 2009
Posts: 2,590
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1540 Post(s)
Liked 1,698 Times in 954 Posts
People typically eyeball frame sizes by looking at the headtube length. But on a bike like this- there is a huge amount of air space between the fork crown and the top of the tire. So the fork is longer and the head tube shorter, and that makes the frame look like it's a size smaller than it is.
But to answer your question- yes a 90 degree (or more) stem would look better in this situation.
icemilkcoffee is offline  
Likes For icemilkcoffee:
Old 08-10-22, 02:27 PM
  #4  
smd4
Senior Member
 
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,639

Bikes: 1989 Cinelli Supercorsa

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3429 Post(s)
Liked 2,817 Times in 1,717 Posts
Looks OK to me. The stem is up high, but that isn't an indicator of proper frame size; more like a comfort thing. Seatpost is right there in the range.
smd4 is offline  
Likes For smd4:
Old 08-10-22, 02:53 PM
  #5  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,672

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
Why do you think the 23” version is too big? Was it too tall or too long? By how much?
I’d say that if you need that much stem to get the bars where you want them, AND you have an opportunity to get the next larger size, get the next larger size.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Classtime is offline  
Likes For Classtime:
Old 08-10-22, 02:59 PM
  #6  
Lbxpdx
Full Member
Thread Starter
 
Join Date: Oct 2020
Location: Portland
Posts: 359
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Likes: 0
Liked 267 Times in 98 Posts
Originally Posted by Classtime
Why do you think the 23” version is too big? Was it too tall or too long? By how much?
I’d say that if you need that much stem to get the bars where you want them, AND you have an opportunity to get the next larger size, get the next larger size.
The 23” hurt. It pressed on my taint. Plus I bought this while on vacation, so I’m nowhere near the bike. The 23” was only a few dollars less and nowhere in as good of condition.
Lbxpdx is offline  
Likes For Lbxpdx:
Old 08-10-22, 03:46 PM
  #7  
52telecaster
ambulatory senior
 
52telecaster's Avatar
 
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347

Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.

Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,633 Times in 1,670 Posts
Originally Posted by Lbxpdx
The 23” hurt. It pressed on my taint. Plus I bought this while on vacation, so I’m nowhere near the bike. The 23” was only a few dollars less and nowhere in as good of condition.
With that info I'd say you bought the right bike. All my stems are pretty high. It's an arthritis thing and I don't care what people think!
52telecaster is offline  
Likes For 52telecaster:
Old 08-10-22, 03:59 PM
  #8  
wrk101
Thrifty Bill
 
wrk101's Avatar
 
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,570

Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more

Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 957 Times in 624 Posts
You like it so thats all that matters.

Back in the day, bikes tended to the bigger size seat tube wise. I remember the Varsity in the early. 1970s coming in 22, 24. and 24 inch frame size. Typical was about one hand width worth of seat post showing. I was sized to a medium, 24 inch. Now I am comfortable on a 21 1/2 inch. Sold my 24 inch bike years ago.

I like dirt drop style stems for comfort too. Its one reason I am attracted to the drop bar conversion on a rigid frame MTB.
wrk101 is offline  
Likes For wrk101:
Old 08-10-22, 04:01 PM
  #9  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,573 Times in 2,580 Posts
With that short of a head tube, looks more like a 19” frame than a 21”.
nlerner is offline  
Likes For nlerner:
Old 08-10-22, 04:52 PM
  #10  
John E
feros ferio
 
John E's Avatar
 
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,765

Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,294 Times in 819 Posts
You must be about my size. The bikes which fit me best are the Bianchi, the Carlton, and the three Capos, all of which are 55cm C-T. The UO-8 is a 21-incher, but proportionally long in the top tube.


1959 Capo with Nervar Star crank and Campag. 980 derailleur upgrades and new Brooks Pro saddle.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
John E is offline  
Likes For John E:
Old 08-10-22, 04:55 PM
  #11  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
That bike looks on the small side to me given how high the bars are. That said, it seems to work for you. I hope you have enough of the stem inserted into the head tube for that to be safe. You are running a Nitto technomic stem (or a tall stem from a different manufacturer), right
bikemig is offline  
Likes For bikemig:
Old 08-10-22, 05:26 PM
  #12  
smd4
Senior Member
 
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,639

Bikes: 1989 Cinelli Supercorsa

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3429 Post(s)
Liked 2,817 Times in 1,717 Posts
Originally Posted by bikemig
That bike looks on the small side to me given how high the bars are.
Nonsense.
smd4 is offline  
Old 08-10-22, 05:39 PM
  #13  
Lbxpdx
Full Member
Thread Starter
 
Join Date: Oct 2020
Location: Portland
Posts: 359
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Likes: 0
Liked 267 Times in 98 Posts
Originally Posted by icemilkcoffee
People typically eyeball frame sizes by looking at the headtube length. But on a bike like this- there is a huge amount of air space between the fork crown and the top of the tire. So the fork is longer and the head tube shorter, and that makes the frame look like it's a size smaller than it is.
But to answer your question- yes a 90 degree (or more) stem would look better in this situation.
there is a fair amount of room. That makes sense.


Lbxpdx is offline  
Old 08-10-22, 05:41 PM
  #14  
Lbxpdx
Full Member
Thread Starter
 
Join Date: Oct 2020
Location: Portland
Posts: 359
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Likes: 0
Liked 267 Times in 98 Posts
Originally Posted by nlerner
With that short of a head tube, looks more like a 19” frame than a 21”.
that’s probably why it looks like a small frame, but it does measure 21” and 21.5”.
Lbxpdx is offline  
Old 08-10-22, 05:42 PM
  #15  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
Originally Posted by smd4
Nonsense.
You're kidding right? Did you bother to read the rest of my post? If the OP is happy with that set up, who cares right as long as the stem has sufficient insertion.

I dunno about what kind of expertise you may have but I worked in a bike shop selling and fitting bikes throughout the 80s. . . .

Last edited by bikemig; 08-10-22 at 05:46 PM.
bikemig is offline  
Likes For bikemig:
Old 08-10-22, 06:27 PM
  #16  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,672

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
Do the Voyageur SPs have high BB? That is the only way taint pressure can occur with so much seat post showing.

ps: I’m a pretty good internet fitter given woefully imperfect information.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Classtime is offline  
Old 08-10-22, 06:30 PM
  #17  
repechage
Senior Member
 
Join Date: Jun 2006
Posts: 20,320
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 3449 Post(s)
Liked 2,800 Times in 1,974 Posts
I would need to see the rider on the bike
repechage is offline  
Old 08-10-22, 06:32 PM
  #18  
smd4
Senior Member
 
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,639

Bikes: 1989 Cinelli Supercorsa

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3429 Post(s)
Liked 2,817 Times in 1,717 Posts
Originally Posted by bikemig
You're kidding right? Did you bother to read the rest of my post? If the OP is happy with that set up, who cares right as long as the stem has sufficient insertion.

I dunno about what kind of expertise you may have but I worked in a bike shop selling and fitting bikes throughout the 80s. . . .
I did read the rest of your post. That was all well and good. Obviously, I took issue with your assertion that the stem length had anything to do with proper frame sizing.

If the rider gets proper leg extension with the saddle at that level, it’s not too small at all.

Worked as a wrench, also selling and fitting, 10 years, 1985-1995.
smd4 is offline  
Likes For smd4:
Old 08-10-22, 07:10 PM
  #19  
embankmentlb
Senior Member
 
embankmentlb's Avatar
 
Join Date: May 2008
Location: North, Ga.
Posts: 2,399

Bikes: 3Rensho-Aerodynamics, Bernard Hinault Look - 1986 tour winner, Guerciotti, Various Klein's & Panasonic's

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 372 Times in 160 Posts
Do manufacturers still make some sort of rando handle bars? The kind that allow a couple of centimeter height to the bars relative to the stem? I am sure there is a proper name for those. Just an idea.
Your frame size looks correct. A 23 could be very challenging.
embankmentlb is offline  
Old 08-10-22, 07:33 PM
  #20  
P!N20
Senior Member
 
P!N20's Avatar
 
Join Date: Aug 2010
Location: Wurundjeri Country
Posts: 2,451
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 1,881 Times in 924 Posts
I never worked in a bike shop, but I feel there are straps missing from the clips.
P!N20 is offline  
Likes For P!N20:
Old 08-10-22, 07:35 PM
  #21  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
Originally Posted by smd4
I did read the rest of your post. That was all well and good. Obviously, I took issue with your assertion that the stem length had anything to do with proper frame sizing.

If the rider gets proper leg extension with the saddle at that level, it’s not too small at all.

Worked as a wrench, also selling and fitting, 10 years, 1985-1995.
Good, then you know that your post was nonsense. A super tall stem is not a sure fire sign that the bike is too small since you have to see someone on the bike but it is often a sign that a bike may be too small. Of course you have to see the rider on the bike since dimensions do vary. And obviously as you wrote that setting up a person correctly on a bike involves proper leg extension as well as having the proper stem length, etc.

Last edited by bikemig; 08-10-22 at 07:39 PM.
bikemig is offline  
Likes For bikemig:
Old 08-11-22, 07:52 AM
  #22  
Steel Charlie
Senior Member
 
Steel Charlie's Avatar
 
Join Date: Apr 2009
Posts: 902
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 354 Post(s)
Liked 489 Times in 261 Posts
It may just be me, but I can't tell you how grateful I am that I don't have to ride that saddle position. No wonder the stem is so high.
Steel Charlie is offline  
Likes For Steel Charlie:
Old 08-11-22, 08:01 AM
  #23  
Trakhak
Senior Member
 
Trakhak's Avatar
 
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,338
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2428 Post(s)
Liked 2,885 Times in 1,646 Posts
Frame angles of 74 degees parallel for a 21" touring bike? Seems unlikely. That's '80s Italian criterium bike/track bike territory.
Trakhak is offline  
Likes For Trakhak:
Old 08-11-22, 08:34 AM
  #24  
Century Bob
Newbie
 
Join Date: May 2021
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 23 Times in 10 Posts
I agree with Steel Charlie. I would address the seat first by leveling it. That would also require adjusting seat height. Then the reach to the bars would be improved allowing the rider to drop the stem further into the head tube. This set up looks very uncomfortable and the bar position is compensating for poor saddle position.
Century Bob is offline  
Old 08-11-22, 08:51 AM
  #25  
himespau 
Senior Member
 
himespau's Avatar
 
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,553
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4196 Post(s)
Liked 2,911 Times in 1,780 Posts
I have to agree that it looks like that saddle angle would be uncomfortable for me and everything else might change if that did. On the other hand, if that saddle angle works for you, go for it.
himespau is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.