ISO and for trade thread part 5
#5376
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,440
Bikes: More than I care to admit
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 1167 Post(s)
Liked 992 Times
in
491 Posts
Maybe it’s my eyes, but I can’t see what’s going on that needs repair.
I have used T9 to refurbish many early STI shifters. It works more often than not, but sometimes they just wear out.
I have used T9 to refurbish many early STI shifters. It works more often than not, but sometimes they just wear out.
__________________
1970 Gitane TdF; 1973 Gitane TdF
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
#5377
Making up the numbers
Join Date: Jun 2022
Posts: 277
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 106 Post(s)
Liked 498 Times
in
159 Posts
Triumph of optimism over experience but looking for one or two sets of seat rail plastic supports and elastomer bumpers for Selle Italia Turbomatic Gel Flow saddles. I have two and while the leather cover and padding have held up great the supports and elastomers/bumpers cut out over time, which is probably the cause of the incessant creaking both now produce. EDIT - on renewed and closer inspection the creaking may be between rails and nylon base immediately aft of front mounting. Have sandwiched a piece of leather in between and will see if that improves things, but still after the supports/bumpers if any spares exist...
Last edited by seagrade; 11-26-22 at 03:55 PM. Reason: added photos and text
#5378
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,512
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2421 Post(s)
Liked 4,387 Times
in
2,092 Posts
#5379
Senior Member
Likes For wesmamyke:
#5380
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,789
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,118 Times
in
1,962 Posts
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#5381
Senior Member
I have 2 pairs of the XC-2 bear trap pedals and some Cyclone pedals that look like track pedals since the cages don't go all the way around the body, there are just 2 plates on either side. I'll clean them up and get pictures in a few days.
#5382
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,789
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,118 Times
in
1,962 Posts
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#5383
Senior Member
Join Date: Oct 2022
Posts: 1,378
Bikes: a couple
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 563 Post(s)
Liked 862 Times
in
455 Posts
Looking for a Trek System 2 rear wheel. WTB Maverick rim (Dark but not black) to go with my front. Conversely, if you're building something and you'd like this wheel... what you got?
#5384
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,216 Times
in
1,103 Posts
I did a little work on the left pedal from post #5376. It needs a little more encouragement to get back to the original shape Can someone provide a measurement to help me determine how far to go? Or is it the same as the SL pedal?
GransSport1 on Flickr
@Jetfin sent me the pedal to provide the washer I needed. Kudos!
Now all I need is another dust cap.
GransSport1 on Flickr
@Jetfin sent me the pedal to provide the washer I needed. Kudos!
Now all I need is another dust cap.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Likes For Schweinhund:
#5388
Total Scrounge
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
I'm looking for a 40 hole Phil Wood front hub for my next project. The bike is a 70's Santana tandem I found on the side of the road for free. No front wheel, though. Rear wheel is a 48 hole Phil with a Super Champion rim.
I just happen to have a 40 hole Super Champion that I can use for the front, and I even have a 40 hole Hadley hub, which I understand is pretty nice, but it'll stick out next to this ratty, old Phil.
If anyone has an old 40 hole Phil and wants to trade for this shiny, newish Hadley that'd be great. Or maybe you'd trade for something else, and that would also be great.
Thanks!
I just happen to have a 40 hole Super Champion that I can use for the front, and I even have a 40 hole Hadley hub, which I understand is pretty nice, but it'll stick out next to this ratty, old Phil.
If anyone has an old 40 hole Phil and wants to trade for this shiny, newish Hadley that'd be great. Or maybe you'd trade for something else, and that would also be great.
Thanks!
__________________
#5389
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,577
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1442 Post(s)
Liked 1,059 Times
in
784 Posts
HOWever, if you want to make a project I did fine a never-built WTB rim that looks like a very close dark gray color to your Maverick, but it's s different model.
28-hole WTB Speed Master (sticker also says 23 and 11.3) it's got machined brake surface side wall, double wall and eyelet-ed.
As I say it's never built but have to point out there was some shop or shipping damage" a small gouge to one small area on the edge of the rim and part of that braking surface that was touched up with black paint and 'smoothed out', I don't think it affects strength or braking but YMMV, only need to be fully transparent cause the shop was when I bought this years ago, I can take a pic but it's smaller than a dime.
If this is interesting then PM me.
#5390
Senior Member
Join Date: Oct 2009
Posts: 1,102
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 288 Post(s)
Liked 329 Times
in
160 Posts
I did a little work on the left pedal from post #5376. It needs a little more encouragement to get back to the original shape Can someone provide a measurement to help me determine how far to go? Or is it the same as the SL pedal?
GransSport1 on Flickr
@Jetfin sent me the pedal to provide the washer I needed. Kudos!
Now all I need is another dust cap.
GransSport1 on Flickr
@Jetfin sent me the pedal to provide the washer I needed. Kudos!
Now all I need is another dust cap.
#5391
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,620
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3877 Post(s)
Liked 6,466 Times
in
3,198 Posts
Check with Scott at SD Bicycle Garage.
sd bicycle garage
If the link doesn't work, just Google it, or you can copy the address and paste it into a new window and remove the "s" from https.
sd bicycle garage
If the link doesn't work, just Google it, or you can copy the address and paste it into a new window and remove the "s" from https.
#5392
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,216 Times
in
1,103 Posts
@SurferRosa - Thanks! Got a washer. Just trying to justify $40+ for a pair of caps!
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Likes For SJX426:
#5393
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 761 Post(s)
Liked 1,563 Times
in
757 Posts
Tektro 559 trade recessed for nutted...
I've got a brand new front & rear set of Tektro 559 calipers with recessed mounting....... & I need a nutted set instead. Anyone?<br />Thx
Last edited by ehcoplex; 11-30-22 at 08:41 AM.
#5395
Senior Member
Join Date: Sep 2017
Location: Hotel CA / DFW
Posts: 1,732
Bikes: 83 Colnago Super, 87 50th Daccordi, 79 & 87 Guerciotti's, 90s DB/GT Mtn Bikes, 90s Colnago Master and Titanio, 96 Serotta Colorado TG, 95/05 Colnago C40/C50, 06 DbyLS TI, 08 Lemond Filmore FG SS, 12 Cervelo R3, 20/15 Surly Stragler & Steamroller
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 601 Post(s)
Liked 779 Times
in
497 Posts
Have 135bcd 42t campy chainring
Want 135bcd 46t or 48t or 50t campy chainring
Will buy but prefer trade
========================================
Have 144bcd 49t campy chainring (current chainrings are 52 / 49 so want to get more range)
Want 144bcd 46t or 44t or 42t or 40t or 38t ... campy chainring
Will buy but prefer trade
Want 135bcd 46t or 48t or 50t campy chainring
Will buy but prefer trade
========================================
Have 144bcd 49t campy chainring (current chainrings are 52 / 49 so want to get more range)
Want 144bcd 46t or 44t or 42t or 40t or 38t ... campy chainring
Will buy but prefer trade
#5396
Total Scrounge
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
I'm looking for a 40 hole Phil Wood front hub for my next project. The bike is a 70's Santana tandem I found on the side of the road for free. No front wheel, though. Rear wheel is a 48 hole Phil with a Super Champion rim.
I just happen to have a 40 hole Super Champion that I can use for the front, and I even have a 40 hole Hadley hub, which I understand is pretty nice, but it'll stick out next to this ratty, old Phil.
If anyone has an old 40 hole Phil and wants to trade for this shiny, newish Hadley that'd be great. Or maybe you'd trade for something else, and that would also be great.
Thanks!
I just happen to have a 40 hole Super Champion that I can use for the front, and I even have a 40 hole Hadley hub, which I understand is pretty nice, but it'll stick out next to this ratty, old Phil.
If anyone has an old 40 hole Phil and wants to trade for this shiny, newish Hadley that'd be great. Or maybe you'd trade for something else, and that would also be great.
Thanks!
So, now I'm just looking for a 140mm 40 hole rear tandem hub of any make, really. Not going to get too picky with this thing, I'd just like to try to make it whole. I've got a selection of pretty cool hubs to trade, if you're interested.
Thanks!
__________________
#5397
Senior Member
Join Date: Oct 2022
Posts: 1,378
Bikes: a couple
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 563 Post(s)
Liked 862 Times
in
455 Posts
I don't really believe you mean that. Because if so... Atom drum brake Actually have a pair of tandem wheels, complete with Motobecane axle nuts (I kinda like them) on 27" steel rigida rims.
Well dang, went out and counted to be sure and it's a heavy duty 36. sorry.
If you want to borrow the wheel til you get what you're looking for, pm me.
Last edited by Schweinhund; 12-05-22 at 06:29 AM.
#5398
Total Scrounge
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
I don't really believe you mean that. Because if so... Atom drum brake Actually have a pair of tandem wheels, complete with Motobecane axle nuts (I kinda like them) on 27" steel rigida rims.
Well dang, went out and counted to be sure and it's a heavy duty 36. sorry.
If you want to borrow the wheel til you get what you're looking for, pm me.
Well dang, went out and counted to be sure and it's a heavy duty 36. sorry.
If you want to borrow the wheel til you get what you're looking for, pm me.
Thanks!
__________________
Last edited by JacobLee; 12-05-22 at 06:22 PM. Reason: Wrong brand
#5399
Senior Member
Join Date: Oct 2022
Posts: 1,378
Bikes: a couple
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 563 Post(s)
Liked 862 Times
in
455 Posts
I meant that if someone had a 40 hole 140mm rear tandem hub, I'd be happy to trade, for instance: a 36 hole 126mm American Classic rear hub, or a pair of Sansin sealed bearing 36 hole 100/126mm hubs, or even this 48 hole 130mm Phil rear hub. Thanks for the loan offer, but shipping wheels just seems prohibitively expensive these days, so I think it's just the hub I'm after.
Thanks!
Thanks!
since it is 140...
#5400
Total Scrounge
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Thanks again!
__________________