Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Help on removing rounded off Hex head

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Help on removing rounded off Hex head

Old 01-03-21, 11:20 PM
  #1  
rsbob 
Sniveling Weasel
Thread Starter
 
Join Date: Sep 2020
Location: Seattle-ish
Posts: 1,551

Bikes: Orbea Orca, Fondriest Racing, Bianchi Trofeo, Bianchi Infinito, Schwinn Varsity, Trek mtn

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 561 Post(s)
Liked 838 Times in 528 Posts
Help on removing rounded off Hex head

Was a dumb-@$$ and rounded off the seat post bolt. Suggestions on removing?

And yes, I will buy some proper Ritchey hex tools heads so this doesn’t happen again.

TIA
__________________
Rick S

“He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you.”- Fredrick Nietzsche. “An argument based reasoned fact, beats one based on emotional rantings every time” Anon





rsbob is offline  
Old 01-03-21, 11:30 PM
  #2  
Wilfred Laurier
Señor Member
 
Wilfred Laurier's Avatar
 
Join Date: Feb 2013
Posts: 5,051
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 633 Post(s)
Liked 278 Times in 203 Posts
The last resort when removing damaged bolts is to drill out the head with a drill bit similar in size to the diameter of the threads.

If the seatpost clamp is integrated into the frame then it might be a pain to get the rest of the bolt out -maybe an Easy Out (google it)

If the clamp is removable (not a built in part of the frame) then you can probably just buy a new clamp. The threads and the face of the bore where the head of the bolt sits can get damaged over time and reduce the clamping force, which usually results in the bolt being overtightened.
Wilfred Laurier is offline  
Old 01-03-21, 11:40 PM
  #3  
phughes
Senior Member
 
phughes's Avatar
 
Join Date: Mar 2011
Posts: 2,182
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 625 Post(s)
Liked 571 Times in 338 Posts
Originally Posted by rsbob View Post
Was a dumb-@$$ and rounded off the seat post bolt. Suggestions on removing?

And yes, I will buy some proper Ritchey hex tools heads so this doesn’t happen again.

TIA
Go to Lowes and get some Grabits.

This was a screw from the timing cover for an engibe I was working on. The head was a 4mm. This Grabit fit perfectly in the head, and allowed me to easily remove the screw.


phughes is offline  
Likes For phughes:
Old 01-03-21, 11:42 PM
  #4  
phughes
Senior Member
 
phughes's Avatar
 
Join Date: Mar 2011
Posts: 2,182
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 625 Post(s)
Liked 571 Times in 338 Posts
Originally Posted by rsbob View Post
Was a dumb-@$$ and rounded off the seat post bolt. Suggestions on removing?

And yes, I will buy some proper Ritchey hex tools heads so this doesn’t happen again.

TIA
Go to Lowes and get some Grabits.

This was a screw from the timing cover for an engine I was working on. The head was a 4mm. This Grabit fit perfectly in the head, and allowed me to easily remove the screw.


phughes is offline  
Likes For phughes:
Old 01-04-21, 12:34 PM
  #5  
ririder
Senior Member
 
ririder's Avatar
 
Join Date: Aug 2017
Location: Rhode Island
Posts: 93

Bikes: Giant Defy Advanced 2, Giant Talon , Specialized Sequoia, Fuji Crosstown

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Liked 65 Times in 32 Posts
Originally Posted by phughes View Post
Go to Lowes and get some Grabits.

This was a screw from the timing cover for an engine I was working on. The head was a 4mm. This Grabit fit perfectly in the head, and allowed me to easily remove the screw.


40 years of turning wrenches on everything from helicopters to high speed packaging machines.... ^^^^^ that right there is the best solution
ririder is offline  
Likes For ririder:
Old 01-04-21, 01:12 PM
  #6  
burnthesheep
Newbie racer
 
Join Date: Feb 2018
Posts: 2,733

Bikes: Propel, red is faster

Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1227 Post(s)
Liked 1,118 Times in 704 Posts
In the past I have dremel'd a slot into them then used a large flathead screwdriver. For the torque range of a seat post clamp, shouldn't need much torque.

Otherwise, yeah.......that tool shown above is awesome. Used them on my car plenty of times.
burnthesheep is offline  
Old 01-04-21, 01:12 PM
  #7  
dedhed
SE Wis
 
dedhed's Avatar
 
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 7,931

Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1708 Post(s)
Liked 1,360 Times in 880 Posts
Internal Allen head? - Find the closest Torx bit and pound it in there and unscrew it.
External hex head? - Vice grips or grinder/dremel and cut the head off.
dedhed is offline  
Likes For dedhed:
Old 01-04-21, 02:10 PM
  #8  
topflightpro
Senior Member
 
topflightpro's Avatar
 
Join Date: Jul 2007
Posts: 7,417
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1797 Post(s)
Liked 583 Times in 364 Posts
I've never had much luck with Grabit's. The Torx trick works sometimes. Drilling out the head has worked for me. I've also used a Dremel and flat cutting tool to cut the middle of the screw through the clamp opening.
topflightpro is offline  
Old 01-04-21, 02:15 PM
  #9  
Altair 4
Senior Member
 
Join Date: Nov 2010
Location: Along the Rivers of Pittsburgh
Posts: 1,149

Bikes: 2011 Novara Forza Hybrid, 2005 Trek 820, 1989 Cannondale SR500 Black Lightning, 1975 Mundo Cycles Caloi Racer

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 182 Post(s)
Liked 154 Times in 88 Posts
Phughes - thanks for posting about that Grabit. I've had a set of easy outs but honestly never had a success with them. I gotta keep that in mind the next time I visit the big box store.
Altair 4 is offline  
Likes For Altair 4:
Old 01-04-21, 04:00 PM
  #10  
rydabent
Senior Member
 
rydabent's Avatar
 
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,094

Bikes: RANS Stratus TerraTrike Tour II

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 2454 Post(s)
Liked 732 Times in 433 Posts
Beside a grabit or other removal tool, use a small punch and give the bolt a few good raps in the center. That helps to "unload" the threads and makes the removal tools work easier.
rydabent is offline  
Old 01-04-21, 04:21 PM
  #11  
Milton Keynes
Senior Member
 
Milton Keynes's Avatar
 
Join Date: May 2016
Posts: 3,634

Bikes: Trek 1100 road bike, Roadmaster gravel/commuter/beater mountain bike

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 2087 Post(s)
Liked 1,365 Times in 749 Posts
Originally Posted by burnthesheep View Post
In the past I have dremel'd a slot into them then used a large flathead screwdriver. For the torque range of a seat post clamp, shouldn't need much torque.
I was going to suggest this method. I've used it plenty of times, on both stripped out screws and special screws like the torx heads with the little pin sticking up in the middle so you can't use a regular torx bit on them.
Milton Keynes is offline  
Old 01-04-21, 04:30 PM
  #12  
rosefarts
With a mighty wind
 
Join Date: May 2015
Posts: 1,827
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 713 Post(s)
Liked 430 Times in 253 Posts
Originally Posted by rsbob View Post

And yes, I will buy some proper Ritchey hex tools heads so this doesn’t happen again.

TIA
Harbor Freight is good enough if the tools are the right size.

Also important, no matter what brand of tools you use, is to know when to stop. There's an internal torque wrench/ bad feeling/ material strain gauge that you can develop over time. It works until it doesn't.
rosefarts is offline  
Old 01-04-21, 04:41 PM
  #13  
2cam16
Senior Member
 
2cam16's Avatar
 
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 4,048

Bikes: TRIMMED DOWN THE HERD

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1002 Post(s)
Liked 637 Times in 442 Posts
2cam16 is offline  
Old 01-04-21, 04:52 PM
  #14  
Pratt
Senior Member
 
Join Date: Aug 2019
Posts: 476
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 175 Times in 110 Posts
Will a cut off disc in a Dremel reach the middle of the bolt between the ends/sides of the clamp? You might be able to just cut it in half.
Pratt is offline  
Old 01-04-21, 06:23 PM
  #15  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 1,030

Bikes: 79 Holdsworth Special, 93 C-dale MT3000 Tandem, 96 C-dale F700CAD3, 2018 Cervelo R3, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 390 Post(s)
Liked 396 Times in 249 Posts
Originally Posted by dedhed View Post
Find the closest Torx bit and pound it in there and unscrew it.
+1
Used this method to save my Vintage Stem.
Use a little finesse and support the seat clamp from behind when you tap in the Torx.

Barry
Barry2 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.