Looking to buy or rent an ISO fork disc jig
#1
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,633
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,793 Times
in
2,280 Posts
Looking to buy or rent an ISO fork disc jig
Last time I used one I borrowed from a local framebuilder here in Portland, Oregon, no longer building. If anybody can help, I'd much appreciate it.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,063
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4197 Post(s)
Liked 3,849 Times
in
2,300 Posts
I no one close by steps up let me know. I bought Starmichael's when I was last in Portland. Andy
__________________
AndrewRStewart
AndrewRStewart
#3
Senior Member
Join Date: Aug 2012
Location: Seattle
Posts: 507
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 103 Post(s)
Liked 144 Times
in
88 Posts
I have a Phrunt Shui in Seattle I could send you to borrow. I think it would fit in the small USPS fixed rate box for like $6-7 each way.
__________________
https://www.flickr.com/photos/54319503@N05/
https://www.draper-cycles.com
https://www.flickr.com/photos/54319503@N05/
https://www.draper-cycles.com
#5
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,633
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,793 Times
in
2,280 Posts
Damn, missed hooking up with you!
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#6
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,633
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,793 Times
in
2,280 Posts
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#7
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,063
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4197 Post(s)
Liked 3,849 Times
in
2,300 Posts
Mark- I would be interested in your experiences with the Incepi after you used it. Andy
__________________
AndrewRStewart
AndrewRStewart
#8
blahblahblah chrome moly
Join Date: Apr 2009
Location: Seattle
Posts: 1,986
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1172 Post(s)
Liked 2,567 Times
in
1,072 Posts
Question, I know it's not as good as a dedicated jig, but if you had the hub and brake, could you just put the hub in the frame/fork and clamp the brake onto the rotor, use that to tack? Maybe small quick tacks so you don't melt anything on the hub or the brake?
I know I did that on a tandem once long ago, like in the '80s, but I don't remember the brake brand or how well that method worked.
I guess if the brake has a piston on one side only*, then you might need to shim the rotor/hub connection while tacking, then take the shims out for use, so the rotor ends up centered between the pads when they're retracted.
* I don't pay attention to disk brakes, are they even made like that anymore? I'm guessing hydro brakes come in from both sides equally.
Mark B
I know I did that on a tandem once long ago, like in the '80s, but I don't remember the brake brand or how well that method worked.
I guess if the brake has a piston on one side only*, then you might need to shim the rotor/hub connection while tacking, then take the shims out for use, so the rotor ends up centered between the pads when they're retracted.
* I don't pay attention to disk brakes, are they even made like that anymore? I'm guessing hydro brakes come in from both sides equally.
Mark B
Likes For bulgie:
#9
Senior Member
Join Date: Dec 2019
Posts: 954
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 263 Times
in
212 Posts
Question, I know it's not as good as a dedicated jig, but if you had the hub and brake, could you just put the hub in the frame/fork and clamp the brake onto the rotor, use that to tack? Maybe small quick tacks so you don't melt anything on the hub or the brake?
I know I did that on a tandem once long ago, like in the '80s, but I don't remember the brake brand or how well that method worked.
I guess if the brake has a piston on one side only*, then you might need to shim the rotor/hub connection while tacking, then take the shims out for use, so the rotor ends up centered between the pads when they're retracted.
* I don't pay attention to disk brakes, are they even made like that anymore? I'm guessing hydro brakes come in from both sides equally.
Mark B
I know I did that on a tandem once long ago, like in the '80s, but I don't remember the brake brand or how well that method worked.
I guess if the brake has a piston on one side only*, then you might need to shim the rotor/hub connection while tacking, then take the shims out for use, so the rotor ends up centered between the pads when they're retracted.
* I don't pay attention to disk brakes, are they even made like that anymore? I'm guessing hydro brakes come in from both sides equally.
Mark B
#10
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,828 Times
in
1,995 Posts
#11
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
Any reportable info on using the Incepi jig?
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#12
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,392
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,690 Times
in
2,513 Posts
You would think someone bought one since Eric/Incepi was the first to have a post mount front jig.
#13
Newbie
It works just as expected. Really easy to loosen, file and swing back to make sure the brake boss fits the blade. Also, unlike the flat mount front adapter, the post mount gives plenty of torch access.
#14
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,633
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,793 Times
in
2,280 Posts
This is a fork I started on 5 years ago, just now getting around to finish it up. I forgot that the SL dropouts I used are stainless, I took a lot of time to carefully file the small attachment area on the disk brake bit for a snug fit as I had to use silver alloy filler just on this region. A careful perusal will reveal some repair work, which has been effected.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#15
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
Thanks for the report on the tool. I bought one a few months ago and haven't had a chance to use it yet. Hopefully that will change soon.
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC