Go Back  Bike Forums > Bike Forums > Beach Cruisers
Reload this Page >

7 speed or 3 speed Electra?

Notices
Beach Cruisers Do you love balloon tires and fenders? Do you love riding the simplicity of a single gear and coaster brakes or a single gear cluster? Do you love the classic curves in the tubing of a cruiser that takes you back to the 1950's and 1960's, stylistically? Here's your home! Welcome to the Beach Cruisers and Cruisers forum!

7 speed or 3 speed Electra?

Old 03-08-21, 06:58 AM
  #1  
MrWasabi
Full Member
Thread Starter
 
MrWasabi's Avatar
 
Join Date: Mar 2016
Location: Lutz, FL
Posts: 416

Bikes: 2014 Fuji Traverse 1.3, 2020 Electra Cruiser 1, 1995 Giant CFM-4

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 124 Post(s)
Liked 51 Times in 36 Posts
7 speed or 3 speed Electra?

I'm eyeballing some cruisers and am wondering folks thoughts on either a 3 speed or 7 speed? I'm in FL and my riding is 99% flat and paved. Are the extra gears useful over the simplicity of the 3 speed? I have a single speed Firmstrong Urban Man now and feel some extra gears would be helpful.

Thanks for any input.
MrWasabi is offline  
Old 03-08-21, 08:15 AM
  #2  
rhenning
Senior Member
 
Join Date: Apr 2006
Posts: 3,653
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 380 Post(s)
Likes: 0
Liked 106 Times in 80 Posts
A 3 speed should be all you need and is simpler and needs less maintenance. Roger
rhenning is offline  
Likes For rhenning:
Old 03-08-21, 10:30 AM
  #3  
2old
Senior Member
 
Join Date: Jul 2014
Location: socal
Posts: 4,249
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 877 Post(s)
Liked 810 Times in 612 Posts
The Nexus three-speed has a 2:1 or so ratio and, as above, should be adequate, more robust and less expensive (than a seven IGH; I don't like cruisers with derailleurs).
2old is offline  
Likes For 2old:
Old 03-08-21, 12:47 PM
  #4  
dabac
Senior Member
 
Join Date: Mar 2008
Posts: 8,688
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1074 Post(s)
Liked 295 Times in 222 Posts
I’m rarely entirely content with a 3-speed, even on the flat.
I’m so used to be able to find that sweet spot where the legs are simply humming along, and 3-speeds seem not to hit that very often.
5-7 speeds give a nicer ride if you want to ride actively.
3-speeds can certainly work, but you need to be willing to adapt your riding to the bike rather than the other way around.
dabac is offline  
Likes For dabac:
Old 03-08-21, 11:30 PM
  #5  
2old
Senior Member
 
Join Date: Jul 2014
Location: socal
Posts: 4,249
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 877 Post(s)
Liked 810 Times in 612 Posts
Cruisers, to me (and everyone that I've seen riding them), are laid back and don't connote rapid, efficient travel. Guess if someone dreams they are flying along on one, they can worry about crank speed.
2old is offline  
Likes For 2old:
Old 03-09-21, 04:29 AM
  #6  
alloo
Full Member
 
alloo's Avatar
 
Join Date: Apr 2019
Location: Albuquerque, NM
Posts: 490

Bikes: 2022 Priority Coast, 2022 Priority Current

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 175 Post(s)
Liked 137 Times in 99 Posts
I like 5 speed hub shifting cruisers. 7 speeds are good too, but without a derailer. Electra used to have the 8i.
alloo is offline  
Old 03-09-21, 05:31 AM
  #7  
C.corri
Junior Member
 
Join Date: Jun 2018
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 12 Times in 7 Posts
I put some left over parts on my Electra cruiser and made it a 9 speed. On windy days, or hilly routes I appreciate the the extra gears. I regularly use my beach cruiser to do 15-20 mile rides after work.

I also have a cruiser with a nexus 7 speed igh. Not a big fan of the feel and I let people borrow that bike to rides.
C.corri is offline  
Likes For C.corri:
Old 03-09-21, 08:45 AM
  #8  
MrWasabi
Full Member
Thread Starter
 
MrWasabi's Avatar
 
Join Date: Mar 2016
Location: Lutz, FL
Posts: 416

Bikes: 2014 Fuji Traverse 1.3, 2020 Electra Cruiser 1, 1995 Giant CFM-4

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 124 Post(s)
Liked 51 Times in 36 Posts
Originally Posted by alloo
I like 5 speed hub shifting cruisers. 7 speeds are good too, but without a derailer. Electra used to have the 8i.
Thanks for the input everyone.

I think the 5 speed hub sounds good as I'm leaning towards the simplicity of no derailleur. I don't see 5 speed options out there though, especially on an Electra. Again, I'm mostly riding flat and paved, not much distance on my cruiser, I have another bike for that but do think some more gears may help over my single speed cruiser at times if I'm not giving up reliability and simplicity too much.
MrWasabi is offline  
Old 03-09-21, 09:41 AM
  #9  
alloo
Full Member
 
alloo's Avatar
 
Join Date: Apr 2019
Location: Albuquerque, NM
Posts: 490

Bikes: 2022 Priority Coast, 2022 Priority Current

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 175 Post(s)
Liked 137 Times in 99 Posts
I'm sorry the 5i and 8i were on the Townie Go 5i (ebike).

https://electra.trekbikes.com/us/en_...ie-go/c/EB210/
alloo is offline  
Likes For alloo:
Old 04-02-21, 06:01 AM
  #10  
gjc2
Member
 
gjc2's Avatar
 
Join Date: Apr 2020
Location: Long Island, New York
Posts: 27

Bikes: Electra Townie 7D

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 15 Times in 10 Posts
I understand the appeal of the three speed hubs but with a seven speed derailleur set up you get a lot more gear range for a lot less money.
gjc2 is offline  
Likes For gjc2:
Old 04-02-21, 01:50 PM
  #11  
xroadcharlie
Senior Member
 
Join Date: Apr 2019
Location: Windsor Ontario, Canada
Posts: 531

Bikes: 2018 Giant Sedona

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 179 Post(s)
Liked 116 Times in 95 Posts
The 3 speed hub will get the job done and even tackle some hills and moderate wind, But often I would probably find I want a gear a little higher or lower. Out of curiosity I have sometimes left my 3 x 7 speed bike in one gear. It actually worked better then I anticipated using my 62 gear inch sprockets. Still able to climb the few less then challenging hills here and do OK against moderate wind.

Then I used just the 3 front rings keeping the back in 6'th. This gives me 45, 62 & 78 gear inches. This is a significant improvement over being locked in 1. I could live with that here, But IMO the benefits of using the 7 speed freewheel outweigh the increased complexity. Shifting the entry level Shimano Altus 7 speed derailleur and freewheel on my 2018 Giant Sedona is a breeze. Very reliable. IMO the 1 x 7 speed seems like a good option for most folks. My biggest complaint with the 7 speed is changing a rear flat, Which is a serious, messy PIA for the average person. Thankfully it doesn't happen very often.

Last edited by xroadcharlie; 04-02-21 at 01:58 PM.
xroadcharlie is offline  
Old 04-06-21, 11:41 AM
  #12  
OldCruiser
Senior Member
 
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,680

Bikes: Most of my bikes are Single Speed Conversions

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 3,067 Times in 1,015 Posts
A few years back , I bought a new Shimano 3 speed wheel set after renting a 3 speed bike in DC while visiting my daughter .
I’d read , the Nexus 3 speed hub was bullet proof , the greatest thing since sliced bread .
NOT !
I’ve never been able to get it adjusted to work right . Every once in awhile I get it out and spend a couple frustrating hours trying to get it to work .
It worked (shifted ) once for one sequence of shifting and hasn’t worked again . I didn’t set it up like the instructions say , it wouldn’t shift with that little yellow bar in the middle .
If I want gears , give me a derailleur. So much easier to adjust and work on .
OldCruiser is offline  
Old 04-06-21, 12:49 PM
  #13  
AlmostTrick
Tortoise Wins by a Hare!
 
AlmostTrick's Avatar
 
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398

Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times in 504 Posts
For me, especially in the conditions you mention, I would find first usually too low and third too high on a 3 speed. With 5-8 speeds I would find the 3 near the center to be almost always perfect.
AlmostTrick is offline  
Old 04-07-21, 11:23 PM
  #14  
GamblerGORD53
Senior Member
 
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,472

Bikes: 2013 Custom SA5w / Rohloff Tourster

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1233 Post(s)
Liked 317 Times in 244 Posts
If the 7 is a deraileur, forget that.
I just got a Nexus 7i on a roadster frame I wanted. The few rides I used it slowly in puddle conditions, I thought it was very nice. The paddle shifter works great. The roller brakes it also came with are a total drag. The 7i will be great for either city, commuting or longer highway rides. With the same cogs, it will be almost the same overall as a SA 5w. The 2 extra gears can make a big difference to fine tune speed. The Nexus came with 44/ 22T > 34 to 84 GI. This is the first time I used the SA 5w with such low gears. Way nicer on up hills of course. It was 46 to 117 GI.
I can now leave the Rohloff14 on my tour heavyweight.

I have also been using my new 584 rims and SA RD3 on an old CCM for 4 years. I did several highway rides, both a hilly 85.5 and a 100 miler. In the city it tends to be a startup 1st and cruise 2nd gear. 3rd is just for hills or big wind. Funny how it's slower, yet it tires me out less. 48 to 86 GIs.

Last edited by GamblerGORD53; 04-15-21 at 08:56 AM.
GamblerGORD53 is offline  
Old 04-08-21, 12:26 AM
  #15  
downtube42
Senior Member
 
downtube42's Avatar
 
Join Date: Oct 2008
Location: Portland, OR
Posts: 3,824

Bikes: Trek Domane SL6 Gen 3, Soma Fog Cutter, Focus Mares AL, Detroit Bikes Sparrow FG, Volae Team, Nimbus MUni

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 890 Post(s)
Liked 2,046 Times in 1,071 Posts
There's a fun saying that goes, a three speed has too low, too high, and not quite right. That aligns with my experience.

I'm generally pretty happy with my 8-speed IGH, but I live in Oregon and I'm typically going either up or down a grade.

In Florida, I'd probably opt for the 3-speed over 7 just because I find 3 more appealing in a minimalistic way. Truth be told, if I lived in FL I'd have a SS/FG, and maybe one of those two-speed kickbacks just for fun.
downtube42 is offline  
Likes For downtube42:
Old 04-15-21, 12:53 AM
  #16  
JehD
Full Member
 
JehD's Avatar
 
Join Date: Jan 2015
Location: New Mexico
Posts: 342

Bikes: 1981 Bertin C34 - 2020 Electra Cruiser 7D - 2021 Mongoose Dolomite ALX

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Liked 131 Times in 86 Posts
I had a Moto 3i and I felt it needed one lower and one higher since the choices are 3 and 7 I went with 7. I really like the 34 tooth low and the 14 high was fine. I swapped it out for a 34-11 as I liked the wider spread. I always hear about the "Complexity" of a rear derailleur but have never had issues, its a cable and 2 limit screws done. I cant see having 21 or 14 gears on a cruiser but its nice having a few for the hills and better to have a few extra you dont use often than always running out....and the 7s are less expensive.
JehD is offline  
Likes For JehD:
Old 05-22-21, 06:39 AM
  #17  
hanry421
Junior Member
 
hanry421's Avatar
 
Join Date: May 2021
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I will suggest you to 3 speed
hanry421 is offline  
Old 05-23-21, 10:41 AM
  #18  
IcySwan1 
Full Member
 
Join Date: May 2021
Location: Haines, Alaska
Posts: 309
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 104 Times in 73 Posts
Wife just bought the 3 speed and is happy with it, but we are old high drag, low speed folks anyways.

Mike
IcySwan1 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.