Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Why I hate cottered cranksets...

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Why I hate cottered cranksets...

Old 12-03-22, 05:15 PM
  #1  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,429

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2385 Post(s)
Liked 2,931 Times in 1,862 Posts
Why I hate cottered cranksets...

Shifting against the threads so they do not slide easily out.



Exhibit A #*%!?%*

Exhibit B #%=€ŁĄ?!*#
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is offline  
Old 12-03-22, 05:29 PM
  #2  
bulgie 
blahblahblah chrome moly
 
bulgie's Avatar
 
Join Date: Apr 2009
Location: Seattle
Posts: 1,980
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 2,542 Times in 1,065 Posts
Are you looking for pointers on how to remove them? There have been long threads on the subject so I won't repeat it all, but if I may offer just one word, it'd be "heat". Heat the area with whatever ya got, heat gun is best but a propane torch works, or even a blow dryer. Whatever your method of extraction, it'll go easier with heat.

I learned in the '60s and early '70s, when we didn't have the luxury of "hating" cotters, you just had to work on them, to be a bike mechanic, because most bikes had 'em. Well, Schwinn/Huffy/Murray/Columbia had one-piece, but those people never brought their bike to a bike shop for repair. A few fancy race bikes had cotterless (and were a joy to work on), but most of the bikes that came in for repair where I worked had cotters. We had a half-price winter overhaul deal, to keep the doors open in the off-season, so sometimes I'd be taking cotters out multiple times per day.

We only fired up the propane torch for super stubborn ones, but now that I have a heat gun, I'd go for the heat as a "first resort", not only as a last resort. Heat 'til the grease starts smoking, then a little more. Strike while the iron is hot!

Mark B
bulgie is offline  
Old 12-03-22, 05:35 PM
  #3  
OldForerunner
Top Seeded Amateur
 
Join Date: Dec 2021
Location: Houston, TX
Posts: 88

Bikes: Kestrels, Peugeots, EPX, Scott, Trek, C-dale, Jeunet

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 105 Times in 41 Posts
I can relate having just removed cottered cranks from a 1973 gas pipe Jeunet. Used penetrating oil and the pipe method with a 16lb sledge. Easy peasy but I will never, no never install cottered cranks on any of my bikes period correctness be damned.
OldForerunner is offline  
Likes For OldForerunner:
Old 12-03-22, 05:48 PM
  #4  
TiHabanero
Senior Member
 
Join Date: Nov 2012
Posts: 4,435
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1726 Post(s)
Liked 1,350 Times in 705 Posts
There is (was?) a tool made for that purpose. Never met a cotter pin that it would not remove. Go to an older established shop with a wise old mechanic and I bet he will have the tool. Let them do the pin removal and you will be a happy camper once again.
TiHabanero is offline  
Old 12-03-22, 05:54 PM
  #5  
Reynolds 
Passista
 
Reynolds's Avatar
 
Join Date: Jul 2005
Posts: 7,586

Bikes: 1998 Pinarello Asolo, 1992 KHS Montańa pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 866 Post(s)
Liked 711 Times in 392 Posts
Cottered cranks are much maligned IMO. Come on, it's just a tiny 9 or 9.5mm cotter! As a last resort I use a BIG bench vise, they always come out that way (but that needs an assistant though).
Reynolds is offline  
Likes For Reynolds:
Old 12-03-22, 06:02 PM
  #6  
jdawginsc 
Edumacator
Thread Starter
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,429

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2385 Post(s)
Liked 2,931 Times in 1,862 Posts
Originally Posted by bulgie
Are you looking for pointers on how to remove them? There have been long threads on the subject so I won't repeat it all, but if I may offer just one word, it'd be "heat". Heat the area with whatever ya got, heat gun is best but a propane torch works, or even a blow dryer. Whatever your method of extraction, it'll go easier with heat.

I learned in the '60s and early '70s, when we didn't have the luxury of "hating" cotters, you just had to work on them, to be a bike mechanic, because most bikes had 'em. Well, Schwinn/Huffy/Murray/Columbia had one-piece, but those people never brought their bike to a bike shop for repair. A few fancy race bikes had cotterless (and were a joy to work on), but most of the bikes that came in for repair where I worked had cotters. We had a half-price winter overhaul deal, to keep the doors open in the off-season, so sometimes I'd be taking cotters out multiple times per day.

We only fired up the propane torch for super stubborn ones, but now that I have a heat gun, I'd go for the heat as a "first resort", not only as a last resort. Heat 'til the grease starts smoking, then a little more. Strike while the iron is hot!

Mark B
So heat, then a rubber mallet? Or a hammer with a block of wood?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is offline  
Old 12-03-22, 06:06 PM
  #7  
clubman 
Phyllo-buster
 
clubman's Avatar
 
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,831

Bikes: roadsters, club bikes, fixed and classic

Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2287 Post(s)
Liked 2,031 Times in 1,245 Posts
Block-o-hardwood with medium-big peen hammer.
clubman is offline  
Likes For clubman:
Old 12-03-22, 06:37 PM
  #8  
Mad Honk 
Senior Member
 
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,939

Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso

Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 1285 Post(s)
Liked 1,836 Times in 1,110 Posts
well dog,
Looks like you are in need of the press I have. Shipping will be a pita, but yer gonna love the results. Smiles, MH
Mad Honk is offline  
Likes For Mad Honk:
Old 12-03-22, 06:44 PM
  #9  
bulgie 
blahblahblah chrome moly
 
bulgie's Avatar
 
Join Date: Apr 2009
Location: Seattle
Posts: 1,980
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 2,542 Times in 1,065 Posts
Originally Posted by jdawginsc
So heat, then a rubber mallet? Or a hammer with a block of wood?
Two main ways,
  1. a cotter pin remover, that is, a dedicated tool such as a VAR #07 lever-type, or a BikeSmith or Park screw-type.
  2. BFH ("big hammer", the F is silent)
I have a Var #07...


...but I still reach for the hammer, myself. But I am very used to it. Most beginner/intermediate cotter mechanics should purchase a BikeSmith screw type, well worth the money.

If you want to use a hammer, a punch is recommended, for reasons.

Rubber mallet is no good. You want as much impulse as possible, a sharp impact. Even wood will dissipate some of the hammer impact, so I use a steel punch. My punch has a concave end that keeps it centered on the cotter. OK my punch is actually an old cottered spindle, that has divots on both ends. The divot is the concavity. I have used this same spindle as my cotter punch since 1972. If I didn't have it and couldn't find another, I'd grind a concavity in some available drift punch.

The punch isn't too important though, backing up the crank is the important bit. The back side of the crank should be propped up somehow. Two methods have been mentioned in this thread already, the pipe method and a vise. I like the pipe (don't quote me out of context). Any random piece of pipe you have, preferably with a "floor flange" threaded on the end that sits on the floor. Cut to a convenient length to fit between the crank and the floor. This transmits the force of your hammer blow directly to the floor. Without it, say if the bike is sitting on its tires, the force goes through the crank spindle to the frame, to the wheels, and the to the floor through the squishy-AF tires — the opposite of a sharp impact. Hammering on a bike in the repair stand is even worse, way too floppy.

My pipe-with-floor-flange was cut to length to match the height of a crank when the bike is held in a repair stand. Adjust the bike in the stand until the pipe is held firmly against the back side of the crank you're hitting. Do it right and the cotter will shoot out of the crank and end up inside the pipe. I almost never need to hit it twice, one good whack is all it takes. But that's after having done it literally a hundred times (conservative estimate).

I'll admit I haven't done one in a while though, so my skilz might be rusty. Probably done it about twice in this millennium.

Mark B

Last edited by bulgie; 12-03-22 at 07:20 PM.
bulgie is offline  
Likes For bulgie:
Old 12-03-22, 06:59 PM
  #10  
Chuck M 
Happy With My Bikes
 
Chuck M's Avatar
 
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,185

Bikes: Hi-Ten bike boomers, a Trek Domane and some projects

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 868 Post(s)
Liked 2,278 Times in 1,100 Posts
Originally Posted by bulgie
BFH ("big hammer", the F is silent)
Not in the manufacturing environments I've worked in. And I'm hard of hearing.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke

Chuck M is offline  
Likes For Chuck M:
Old 12-03-22, 07:01 PM
  #11  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,878

Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1448 Post(s)
Liked 2,177 Times in 957 Posts
What's not to like about the ones which preserve a bit of history?

From an very early 1950s ladies Schwinn Superior, now mounted on a '75 Schwinn Voyageur II, and mated to a '51 Sturmey Archer AM 3-speed IGH.
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is offline  
Old 12-03-22, 07:11 PM
  #12  
bulgie 
blahblahblah chrome moly
 
bulgie's Avatar
 
Join Date: Apr 2009
Location: Seattle
Posts: 1,980
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 2,542 Times in 1,065 Posts
Originally Posted by Chuck M
Not in the manufacturing environments I've worked in. And I'm hard of hearing.
Well, BF is a family-friendly forum so let's say BFH stands for "bike forum hammer"
bulgie is offline  
Likes For bulgie:
Old 12-03-22, 07:12 PM
  #13  
albrt 
Senior Member
 
Join Date: Oct 2020
Location: Phoenix, AZ
Posts: 910

Bikes: 1964(?) Frejus Tour de France, 1967(?) Dawes Double Blue, 1979 Trek 710, 1982 Claud Butler Dalesman, 1983 Schwinn Paramount Elite, 2014 Brompton, maybe a couple more

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 308 Post(s)
Liked 669 Times in 324 Posts
I have had very good luck with the Bikesmith press. It's too expensive if you are only going to remove one crank, but I am kind of the designated guy at the co-op for dealing with cotters, so it has been well worth it. Especially with continental bikes that use small cotters you can't get replacements for.

I also have a pipe setup like Bulgie described (aka Sheldon Brown Anvil) for driving out cotters with a hammer, but I haven't had to use it since I got the Bikesmith press.
albrt is offline  
Likes For albrt:
Old 12-03-22, 07:14 PM
  #14  
bulgie 
blahblahblah chrome moly
 
bulgie's Avatar
 
Join Date: Apr 2009
Location: Seattle
Posts: 1,980
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 2,542 Times in 1,065 Posts
Originally Posted by pastorbobnlnh
<snip> mated to a '51 Sturmey Archer AM 3-speed IGH.
Lemme guess, the Sturmey IGH is because you're tired of working on freewheels?
bulgie is offline  
Old 12-03-22, 07:21 PM
  #15  
RCMoeur 
Cantilever believer
 
RCMoeur's Avatar
 
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,475
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 491 Post(s)
Liked 1,667 Times in 761 Posts
Originally Posted by albrt
I have had very good luck with the Bikesmith press. It's too expensive if you are only going to remove one crank, but I am kind of the designated guy at the co-op for dealing with cotters, so it has been well worth it.
Yeah, but ever since the National League went to that lineup things just haven't been the same.
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
RCMoeur is online now  
Likes For RCMoeur:
Old 12-03-22, 07:34 PM
  #16  
Slowride79
Full Member
 
Join Date: Apr 2018
Location: Hitsville USA
Posts: 313

Bikes: 50s, 60s, 70s Nottingham/Worksop bikes, becanes, Gitane, Bertin, Lion of Sochaux

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Liked 120 Times in 75 Posts
I have found this to work on Raleigh sports/superbe/tourist for example but only on those. If you try on other cranks it does not have enough reach , will bend the cotter , and then you will have lots of fun drilling it out without damaging the crank.

https://www.bikeforums.net/classic-v...ter-press.html
Slowride79 is offline  
Likes For Slowride79:
Old 12-03-22, 07:34 PM
  #17  
Trakhak
Senior Member
 
Trakhak's Avatar
 
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,339
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2429 Post(s)
Liked 2,889 Times in 1,646 Posts
My technique (discovered in the early '70s) is simple: thread on the cotter nut several turns (but don't tighten down fully) after placing one or two washers on the threaded portion of the cotter. The objective is to leave about 1/8" of space (maximum, about 1/4") for the movement of the cotter. That way, when you hammer it, you can't mushroom the threaded end and it can't bend sideways. All of the force goes straight down.

Then, hammer on the cotter nut. Best to support the underside of the crank around the unthreaded end of the cotter. I used to stand the bike on the floor and place a piece of wood under the crank that had a V cut into it that left space for movement of the cotter, with the other end of the piece of wood on the ground. I also put a sheet of cardboard between the crank and the bike's frame, so I wouldn't have to worry about gouging the frame and could therefore smack the cotter with the full force needed.
Trakhak is online now  
Old 12-03-22, 07:40 PM
  #18  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,878

Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1448 Post(s)
Liked 2,177 Times in 957 Posts
Originally Posted by bulgie
Lemme guess, the Sturmey IGH is because you're tired of working on freewheels?
No. Still working on freewheels.

Now that I live on a very flat coastal island, IGHs are now practical for me to use.
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is offline  
Old 12-03-22, 08:26 PM
  #19  
iab
Senior Member
 
iab's Avatar
 
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,156
Mentioned: 200 Post(s)
Tagged: 0 Thread(s)
Quoted: 2993 Post(s)
Liked 3,710 Times in 1,393 Posts
Nothing prettier than a cottered crank.

Chapman Crank 01 by iabisdb, on Flickr

Frejus 40 by iabisdb, on Flickr
iab is offline  
Old 12-03-22, 08:35 PM
  #20  
Mad Honk 
Senior Member
 
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,939

Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso

Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 1285 Post(s)
Liked 1,836 Times in 1,110 Posts
As TiHabarnarno says, deal with an old mechanic like me and use my tool. I will send it out on Monday. Smiles, MH
Mad Honk is offline  
Old 12-03-22, 08:36 PM
  #21  
clubman 
Phyllo-buster
 
clubman's Avatar
 
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,831

Bikes: roadsters, club bikes, fixed and classic

Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2287 Post(s)
Liked 2,031 Times in 1,245 Posts
clubman is offline  
Old 12-03-22, 08:39 PM
  #22  
OldForerunner
Top Seeded Amateur
 
Join Date: Dec 2021
Location: Houston, TX
Posts: 88

Bikes: Kestrels, Peugeots, EPX, Scott, Trek, C-dale, Jeunet

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 105 Times in 41 Posts
I submit that it ain't the cotter that makes those cranks pretty.
OldForerunner is offline  
Likes For OldForerunner:
Old 12-03-22, 08:47 PM
  #23  
bulgie 
blahblahblah chrome moly
 
bulgie's Avatar
 
Join Date: Apr 2009
Location: Seattle
Posts: 1,980
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 2,542 Times in 1,065 Posts
Originally Posted by Trakhak
<snip> stand the bike on the floor and place a piece of wood under the crank that had a V cut into it that left space for movement of the cotter, with the other end of the piece of wood on the ground
Just make sure the floor is strong enough before hammering.

Here's another bracing method, from a '60s publication:
bulgie is offline  
Likes For bulgie:
Old 12-04-22, 01:13 AM
  #24  
cudak888 
www.theheadbadge.com
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Surprised nobody has mentioned a cotter press until now.

Another vote for Mark's cotter press tool. These do the job for both removal and installation without any wayward hammers smashing cotters into oblivion, they're better than the old Park presses, and significantly cheaper than the impressive and "I-want-one" VAR tool.

https://www.bikesmithdesign.com/CotterPress/




-Kurt
__________________













Last edited by cudak888; 12-04-22 at 01:25 AM.
cudak888 is offline  
Likes For cudak888:
Old 12-04-22, 01:21 AM
  #25  
bulgie 
blahblahblah chrome moly
 
bulgie's Avatar
 
Join Date: Apr 2009
Location: Seattle
Posts: 1,980
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 2,542 Times in 1,065 Posts
Originally Posted by cudak888
Surprised nobody has mentioned a cotter press until now.
Not to toot my own horn, uh no scratch that, YES to toot my own horn... I mentioned three different presses in post #9. Including the awesome Bikesmith, which I mentioned twice (with links both times) and which I recommended people buy.

What do I win? Is there an award for "Most Thirsty"?
bulgie is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.