15mm to 12mm fork conversion options
#1
Full Member
Thread Starter
15mm to 12mm fork conversion options
I just switched wheelsets on my 2015 Niner RLT9 steel. New wheelset is Bontrager aeolus comp 5.
I was told that because I have a '15 model the fork is 15mm thru axle, which won't fit on the wheel unless I get 15mm end caps or convert the fork to 12mm.
Someone recommended this:
https://www.ebay.com/itm/115321133233?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2jWJ-_jyRe2&sssrc=2349624&ssuid=nNYWh4E8T1m&var=&widget_ver=artemis&media=COPY
However I'm wondering if there are any cheaper alternatives? I've already sunk a lot of money into repairs and would like to keep costs low.
I was told that because I have a '15 model the fork is 15mm thru axle, which won't fit on the wheel unless I get 15mm end caps or convert the fork to 12mm.
Someone recommended this:
https://www.ebay.com/itm/115321133233?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2jWJ-_jyRe2&sssrc=2349624&ssuid=nNYWh4E8T1m&var=&widget_ver=artemis&media=COPY
However I'm wondering if there are any cheaper alternatives? I've already sunk a lot of money into repairs and would like to keep costs low.
#2
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,161
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 862 Post(s)
Liked 1,195 Times
in
687 Posts
The 431778 15mm endcap kit is half the price of that thru-axle.
Barry
Barry
#3
Full Member
Thread Starter
That sounds much better! Where can I pick one up?
Would any of these work?
https://www.backcountry.com/industry...ies-endcap-kit
Would any of these work?
https://www.backcountry.com/industry...ies-endcap-kit
#5
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,676
Bikes: Too many bikes, too little time to ride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 425 Post(s)
Liked 454 Times
in
313 Posts
I think you'd want the endcaps specific to your hubs, no? There are no such things as generic endcap adapters.
#6
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,161
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 862 Post(s)
Liked 1,195 Times
in
687 Posts
The top 10 hits in my Google link are the correct part number.
OP just has to find a store he likes.
Barry
OP just has to find a store he likes.
Barry
Likes For Barry2:
#7
Full Member
Thread Starter
Will they fit? Just want to clarify before I buy
#8
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,161
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 862 Post(s)
Liked 1,195 Times
in
687 Posts
Purchase the Trek part number I placed in my 1st post and Google link.
Anything else, you’re on your own. End caps are not standardized for fit.
Barry
EDIT: I've double checked the Spec sheet, and the part number appears to be correct.
>>HERE<< is the link to the Spec, the 15mm end cap is listed in the parts.
Anything else, you’re on your own. End caps are not standardized for fit.
Barry
EDIT: I've double checked the Spec sheet, and the part number appears to be correct.
>>HERE<< is the link to the Spec, the 15mm end cap is listed in the parts.
Last edited by Barry2; 06-05-23 at 12:34 PM.
Likes For Barry2: