Are Shimano parts that come straight from China genuine?
#1
Junior Member
Thread Starter
Are Shimano parts that come straight from China genuine?
Take as an example Shimano's Tiagra-level SPD-SL pedals, PD-R550, though I don't think it's limited to this part in particular.
$100 at Performance https://www.performancebike.com/shim...dr550l/p332789
$100 at Jenson https://www.jensonusa.com/Shimano-PD-R550-Spd-Sl-Pedals
If you type PD-R550 into ebay, you get tons of "from China" results selling them for ~$50, for example https://www.ebay.com/itm/SPD-SL-Pedals-PD-R550-Clipless-Road-Mountain-Bike-Pedal-w-6-Float-Cleats-Plate/373130428879?hash=item56e04e81cf:g:RY4AAOSw5F9fITnA
Are these fakes? Or unauthorized copies made by the same factory or something? Why would they be half of the "real" price.
$100 at Performance https://www.performancebike.com/shim...dr550l/p332789
$100 at Jenson https://www.jensonusa.com/Shimano-PD-R550-Spd-Sl-Pedals
If you type PD-R550 into ebay, you get tons of "from China" results selling them for ~$50, for example https://www.ebay.com/itm/SPD-SL-Pedals-PD-R550-Clipless-Road-Mountain-Bike-Pedal-w-6-Float-Cleats-Plate/373130428879?hash=item56e04e81cf:g:RY4AAOSw5F9fITnA
Are these fakes? Or unauthorized copies made by the same factory or something? Why would they be half of the "real" price.
#2
WALSTIB
Their probably genuine fakes. Roll the dice if you feel lucky
#3
Senior Member
Join Date: May 2005
Location: Queanbeyan, Australia.
Posts: 4,135
Mentioned: 85 Post(s)
Tagged: 0 Thread(s)
Quoted: 3450 Post(s)
Liked 420 Times
in
289 Posts
Most "Fakes" in this World were made side by side with the "real" thing on the same production line yet left the factory in an "unauthorised" manner.
Also what happens is that a "Brand" changes its subcontract manufacturer so the old items keep being made but now are deemed to be "Fakes". The quality may be just fine.
There is a reasonable likelihood that half price items from China did in fact leave the factory in an unauthorised manner.
Also what happens is that a "Brand" changes its subcontract manufacturer so the old items keep being made but now are deemed to be "Fakes". The quality may be just fine.
There is a reasonable likelihood that half price items from China did in fact leave the factory in an unauthorised manner.
#4
Senior Member
They are fakes, quality is shoddy. Usually these fakes get dumped on markets like Vietnam, Indonesia, Thailand, a lot more than in the US and Europe.
There are plenty of horror stories of Shimano fake cranks suddenly broke off in a sprint, leaving rider destroyed. Chinese fakes are a well known issue in Asia.
There are plenty of horror stories of Shimano fake cranks suddenly broke off in a sprint, leaving rider destroyed. Chinese fakes are a well known issue in Asia.
#5
Senior Member
Join Date: Oct 2017
Location: NJ
Posts: 625
Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 204 Times
in
142 Posts
Most "Fakes" in this World were made side by side with the "real" thing on the same production line yet left the factory in an "unauthorised" manner.
Also what happens is that a "Brand" changes its subcontract manufacturer so the old items keep being made but now are deemed to be "Fakes". The quality may be just fine.
There is a reasonable likelihood that half price items from China did in fact leave the factory in an unauthorised manner.
Also what happens is that a "Brand" changes its subcontract manufacturer so the old items keep being made but now are deemed to be "Fakes". The quality may be just fine.
There is a reasonable likelihood that half price items from China did in fact leave the factory in an unauthorised manner.
Still using my $5 Canal St. NY Oakley shades from the 90's.
__________________
Last new bike 1991
Last new bike 1991
#6
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
ST-R8020 hydraulic brifters? Not counterfeit.
SPD-SL cleats in the bag? Likely counterfeit.
It depends on the barriers to production. Many complex parts are simply not worth the tooling investment to try to duplicate.
To answer the OP's question, it depends. I've purchased a complete R8000 (cable actuated, rim brake) groupset and pedals for a carbon build I did last year - straight from AliExpress. Best prices I could find. No issues whatsoever.
I recently bought what were definitely grey-market TRP RRL levers for $10. Identical to the $80 version, sans the drilling. Do I need the drilled levers? No.
SPD-SL cleats in the bag? Likely counterfeit.
It depends on the barriers to production. Many complex parts are simply not worth the tooling investment to try to duplicate.
To answer the OP's question, it depends. I've purchased a complete R8000 (cable actuated, rim brake) groupset and pedals for a carbon build I did last year - straight from AliExpress. Best prices I could find. No issues whatsoever.
I recently bought what were definitely grey-market TRP RRL levers for $10. Identical to the $80 version, sans the drilling. Do I need the drilled levers? No.
#7
Senior Member
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
IF your worried about it being fake, why not buy them from a company in the U.S.
https://www.ebay.com/itm/PD-R550-SPD...-/373097890317
Same Price
EDIT: Dup...reading further on the above, it's Chinese stock being sold by the U.S. business.
https://www.ebay.com/itm/PD-R550-SPD...-/373097890317
Same Price
EDIT: Dup...reading further on the above, it's Chinese stock being sold by the U.S. business.
Likes For travbikeman:
#8
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,604
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10947 Post(s)
Liked 7,473 Times
in
4,181 Posts
Take as an example Shimano's Tiagra-level SPD-SL pedals, PD-R550, though I don't think it's limited to this part in particular.
$100 at Performance https://www.performancebike.com/shim...dr550l/p332789
$100 at Jenson https://www.jensonusa.com/Shimano-PD-R550-Spd-Sl-Pedals
If you type PD-R550 into ebay, you get tons of "from China" results selling them for ~$50, for example https://www.ebay.com/itm/SPD-SL-Pedals-PD-R550-Clipless-Road-Mountain-Bike-Pedal-w-6-Float-Cleats-Plate/373130428879?hash=item56e04e81cf:g:RY4AAOSw5F9fITnA
Are these fakes? Or unauthorized copies made by the same factory or something? Why would they be half of the "real" price.
$100 at Performance https://www.performancebike.com/shim...dr550l/p332789
$100 at Jenson https://www.jensonusa.com/Shimano-PD-R550-Spd-Sl-Pedals
If you type PD-R550 into ebay, you get tons of "from China" results selling them for ~$50, for example https://www.ebay.com/itm/SPD-SL-Pedals-PD-R550-Clipless-Road-Mountain-Bike-Pedal-w-6-Float-Cleats-Plate/373130428879?hash=item56e04e81cf:g:RY4AAOSw5F9fITnA
Are these fakes? Or unauthorized copies made by the same factory or something? Why would they be half of the "real" price.
A jersey is easy to fake. A frame isnt easy to fake, but since there are no real moving parts and its large pieces, its at least easier than drivetrains with all the small moving pieces(especially shifter internals).
I have bought a handful of shifters from China in the last 5 years- Microshift R7 2x7, Microshift R9 2x9, Microshift R9 3x9, Shimano 5800 105, and Shimano 6800 Ultegra, All are as real as shifters I have purchased from Merlin(105 8020 Hydraulic and 6800 Ultegra).
It may be 'factory direct'. It may be 'gray market'. It may be 'black market'. I dont know.
I would disagree that any are from the reject bin as they all work flawlessly as they should.
As for the pedals in question, just order them and pay with paypal. When they arrive, if you think they are fake then open a request for refund due to them being fake. The seller has a 99.6% approval rating, so its not like they are a shell seller that will shut down once they sell a handful of fake product. Paypal protection is for this very concern.
#9
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,604
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10947 Post(s)
Liked 7,473 Times
in
4,181 Posts
They are fakes, quality is shoddy. Usually these fakes get dumped on markets like Vietnam, Indonesia, Thailand, a lot more than in the US and Europe.
There are plenty of horror stories of Shimano fake cranks suddenly broke off in a sprint, leaving rider destroyed. Chinese fakes are a well known issue in Asia.
There are plenty of horror stories of Shimano fake cranks suddenly broke off in a sprint, leaving rider destroyed. Chinese fakes are a well known issue in Asia.
This appears to just be a guess that you are passing off as fact.
Likes For mstateglfr:
#10
Junior Member
Thread Starter
I appreciate the insights of everyone who has commented. It does seem hard to credit that it would be worth it to set up tooling just to fake a certain pedal--but who knows. On the other hand, I could easily believe that Shimano ordered a certain number of pedals, and a factory made extra to sell on the gray market, and maybe those have looser QC.
#11
Banned
The Shimano Corporation has many sub contracts out, for getting parts made in other places/ countries other than Osaka, Japan.
#12
Banned
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924
Bikes: RANS Stratus TerraTrike Tour II
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,056 Times
in
635 Posts
This thread begs the question, where are "real" Shimano made? And do they farm out cheaper level parts to China?
#13
Junior Member
Thread Starter
I think most Shimano stuff I've gotten says made in Malaysia, although I just got some XTR pedals that do say made in Japan. However I've read that it's not super strict on what is allowed to be labelled "made in Japan" and "finished in Japan" is sometimes more accurate.
Last edited by coffeecherrypie; 08-24-20 at 12:46 PM.
#14
Senior Member
Yes and no. They may be produced on the same line. But that doesn't mean identical quality. They may be produced on a separate run, which can ignore some of the standards the Shimano parts require. So you may get cheaper springs, lower-quality bearings... who knows??? Remember TANSTAAFL - you're taking your chances with the direct-from-china brand name stuff - it may be good or it may be total junk. And Shimano won't help you if you buy a counterfeit product and you have problems.
Likes For BlazingPedals:
#15
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,800
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,163 Times
in
1,322 Posts
I can’t speak for all bike parts, as to the same line or truly counterfeit. I have purchased bike parts off eBay that came from China and have not had issues.
Bike parts, while high quantity, might pale in profit compared to counterfeit frames or golf clubs. In those cases the devil is in the details. The cost to accurately reproduce a counterfeit down to the very fine details is what usually is the clue of a counterfeit item. And they will never weigh the same.
For pedals, I would think a close comparison with the real thing, would confirm if it were real or counterfeit. Any small detail, tab, rivet, finish, crispness of lettering. These operations probably need to produce a run, dump, and move on. I doubt they can duplicate the real item exactly.
John
Bike parts, while high quantity, might pale in profit compared to counterfeit frames or golf clubs. In those cases the devil is in the details. The cost to accurately reproduce a counterfeit down to the very fine details is what usually is the clue of a counterfeit item. And they will never weigh the same.
For pedals, I would think a close comparison with the real thing, would confirm if it were real or counterfeit. Any small detail, tab, rivet, finish, crispness of lettering. These operations probably need to produce a run, dump, and move on. I doubt they can duplicate the real item exactly.
John
#17
Senior Member
Join Date: Nov 2019
Location: Iowa
Posts: 682
Bikes: 2021 Salsa Fargo 1x12, 2019 Jamis Renegade Exploit 1x11. Motobacne NX Fat Tire
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 332 Times
in
170 Posts
Your rolling the dice. Might be good, might be total crap.
if I’m going to be spending Many hours, days, or weeks depending on the performance and quality of a product, I’m not rolling the dice,
if I’m going to be spending Many hours, days, or weeks depending on the performance and quality of a product, I’m not rolling the dice,
#18
Senior Member
Do you ride with a lot of people in these markets who have their new Shimano part just break like cookies?
Do you know the LBS in these places will sell Shimano parts "in bulk", when Shimano doesn't do that, regardless of market.
I live and ride there part time, I know a lot of clubs there, in all these countries, and I know some of their domestic pros, I know the cycling scene in Asia. I'm guessing you're in the US? There are a lot more fakes there than what you're accustomed to seeing int he US or on Aliexpress.
#19
Senior Member
Join Date: Aug 2020
Location: South Wales
Posts: 206
Bikes: 2016 Trek Emonda S6 frameset, custom build (road). 1995 Dawes Genesis Reynolds 531 Competition frameset, custom build (road). 1996 Orange C16R frameset, custom build (retro MTB). Coyote Dual hard-tail, custom build (MTB).
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 61 Post(s)
Liked 76 Times
in
55 Posts
Take as an example Shimano's Tiagra-level SPD-SL pedals, PD-R550, though I don't think it's limited to this part in particular.
$100 at Performance https://www.performancebike.com/shim...dr550l/p332789
$100 at Jenson https://www.jensonusa.com/Shimano-PD-R550-Spd-Sl-Pedals
If you type PD-R550 into ebay, you get tons of "from China" results selling them for ~$50, for example https://www.ebay.com/itm/SPD-SL-Pedals-PD-R550-Clipless-Road-Mountain-Bike-Pedal-w-6-Float-Cleats-Plate/373130428879?hash=item56e04e81cf:g:RY4AAOSw5F9fITnA
Are these fakes? Or unauthorized copies made by the same factory or something? Why would they be half of the "real" price.
$100 at Performance https://www.performancebike.com/shim...dr550l/p332789
$100 at Jenson https://www.jensonusa.com/Shimano-PD-R550-Spd-Sl-Pedals
If you type PD-R550 into ebay, you get tons of "from China" results selling them for ~$50, for example https://www.ebay.com/itm/SPD-SL-Pedals-PD-R550-Clipless-Road-Mountain-Bike-Pedal-w-6-Float-Cleats-Plate/373130428879?hash=item56e04e81cf:g:RY4AAOSw5F9fITnA
Are these fakes? Or unauthorized copies made by the same factory or something? Why would they be half of the "real" price.
Likes For Bob the Mech:
#20
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,912
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1794 Post(s)
Liked 2,328 Times
in
1,375 Posts
I purchased a set of SPD cleats from a seller in China. They were roughly 4/5 the size of real ones, and no they don't fit any pedals though they look great.
I buy bar tape and cables with no issues but since Shimano has no Chinese assembly lines that I know of (can't speak for other brands) as far as I can see the seller would have to be selling stuff that was imported to China so exceptional low prices set warning bells off. Return shipping to there is very high.
I buy bar tape and cables with no issues but since Shimano has no Chinese assembly lines that I know of (can't speak for other brands) as far as I can see the seller would have to be selling stuff that was imported to China so exceptional low prices set warning bells off. Return shipping to there is very high.
#21
Senior Member
Join Date: Jul 2015
Location: reno, nv
Posts: 2,296
Bikes: yes, i have one
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1134 Post(s)
Liked 1,179 Times
in
686 Posts
i'd be leary about getting anything that is a critical component that does not look legit. bar tape...ok. derailleur, maybe not.
one of my friends once asked then answered his own question and it has stuck with me ever since..."what do you get from a junk yard...junk."
one of my friends once asked then answered his own question and it has stuck with me ever since..."what do you get from a junk yard...junk."
#22
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,458
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4330 Post(s)
Liked 3,955 Times
in
2,644 Posts
Most fakes are not made by the same workers in the same factories by some magical third shift or they "just fell off the back of the truck" It is a common myth that we love because we can continue supporting the fakes and feel good about it. I would rather support the real thing so I know I can get all the warranties and support from the actual manufacturer.
If something is too good to be true, it most likely is.
If something is too good to be true, it most likely is.
Likes For veganbikes:
#23
Senior Member
Join Date: May 2005
Location: Queanbeyan, Australia.
Posts: 4,135
Mentioned: 85 Post(s)
Tagged: 0 Thread(s)
Quoted: 3450 Post(s)
Liked 420 Times
in
289 Posts
Most fakes are not made by the same workers in the same factories by some magical third shift or they "just fell off the back of the truck" It is a common myth that we love because we can continue supporting the fakes and feel good about it. I would rather support the real thing so I know I can get all the warranties and support from the actual manufacturer.
If something is too good to be true, it most likely is.
If something is too good to be true, it most likely is.
Err, No. I'm not saying that "fakes" come out of the same factory as the real thing in order to make you feel good about buying them.
Often these "fakes" are seconds. The name "brand" want's them to be destroyed yet there is a strong culture in China and Asia to not waste things. So they get sold in an unauthorised manner.
Also a HUGE source of "fakes" is when the Name Brand changes contract manufacturers. The contract manufacturer is supposed to cease and desist from making the items anymore but they don't. They keep on making the same item which is now a "fake". The quality of these items will definitely slip though as they aim to make them cheaper and cheaper.
The costs involved in creating a "fake" from scratch are HUGE and completely incompatible with the whole modus operandi of making and selling "fakes".
#24
Senior Member
Join Date: Jul 2015
Location: reno, nv
Posts: 2,296
Bikes: yes, i have one
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1134 Post(s)
Liked 1,179 Times
in
686 Posts
Err, No. I'm not saying that "fakes" come out of the same factory as the real thing in order to make you feel good about buying them.
Often these "fakes" are seconds. The name "brand" want's them to be destroyed yet there is a strong culture in China and Asia to not waste things. So they get sold in an unauthorised manner.
Also a HUGE source of "fakes" is when the Name Brand changes contract manufacturers. The contract manufacturer is supposed to cease and desist from making the items anymore but they don't. They keep on making the same item which is now a "fake". The quality of these items will definitely slip though as they aim to make them cheaper and cheaper.
The costs involved in creating a "fake" from scratch are HUGE and completely incompatible with the whole modus operandi of making and selling "fakes".
Often these "fakes" are seconds. The name "brand" want's them to be destroyed yet there is a strong culture in China and Asia to not waste things. So they get sold in an unauthorised manner.
Also a HUGE source of "fakes" is when the Name Brand changes contract manufacturers. The contract manufacturer is supposed to cease and desist from making the items anymore but they don't. They keep on making the same item which is now a "fake". The quality of these items will definitely slip though as they aim to make them cheaper and cheaper.
The costs involved in creating a "fake" from scratch are HUGE and completely incompatible with the whole modus operandi of making and selling "fakes".
#25
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,800
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,163 Times
in
1,322 Posts
Well not to go off topic, but the Industrial Revolution wasn’t known for creating wonderful childhood memories.
John
John
Likes For 70sSanO: