is this used rim ok to buy?
#1
Senior Member
Thread Starter
Join Date: Jan 2020
Location: San Jose
Posts: 1,025
Bikes: Blur / Ibis Hakka MX / team machince alr2 / topstone 1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 426 Post(s)
Liked 274 Times
in
201 Posts
is this used rim ok to buy?
wheel set for only $200. the rest of both rims looks great. thought I could use it as back up for my gravel bike and put on some gp 5000 32 when then become available again.
just concerned about this gash/nick.
Good condition- few scratches, see pictures. Comes with some excellent condition conti 5000 TL 25c tires. No rotors. 142/100 through axel. Never crashed or needed truing, hubs roll perfect.
#2
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,785
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked 1,019 Times
in
719 Posts
Hard to say, need a pic of the backside of that to get a better feel for if it is superficial or going through. I wouldn't want to buy them without putting my hands on them and examining up close.
Likes For Russ Roth:
#3
Senior Member
Obviously the wheel is not in my hand but if the wheel is true and evenly tensioned, check the bead seat area behind that scratch. It looks like its just a scratch, without a dent--if so, I wouldn't hesitate to ride it. I've seen a hell of a lot worse used regularly on a lot of trail bikes...
Likes For cpach:
#4
Senior Member
Thread Starter
Join Date: Jan 2020
Location: San Jose
Posts: 1,025
Bikes: Blur / Ibis Hakka MX / team machince alr2 / topstone 1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 426 Post(s)
Liked 274 Times
in
201 Posts
thanks guys.
pick them up today! they look great. need to order cassette and disc brakes.
pick them up today! they look great. need to order cassette and disc brakes.
#7
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,467
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4335 Post(s)
Liked 3,958 Times
in
2,646 Posts
I probably wouldn't want to ride them but hey if I had doubts I probably wouldn't have gotten them. Hopefully it is just cosmetic.
#8
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18351 Post(s)
Liked 4,502 Times
in
3,346 Posts
Is that a front or rear?
I assume you're using disc brakes, so you don't have to worry about the brake track.
I don't think I'd use that as-is. I'm trying to imagine how the crack would impact the bead under pressure, and whether it would risk blowing off the side.
Ideally you would grind out the scratch in a taper, pack in new carbon fiber and resin. Clamp, dry/cure, then sand it back smooth and paint.
I assume you're using disc brakes, so you don't have to worry about the brake track.
I don't think I'd use that as-is. I'm trying to imagine how the crack would impact the bead under pressure, and whether it would risk blowing off the side.
Ideally you would grind out the scratch in a taper, pack in new carbon fiber and resin. Clamp, dry/cure, then sand it back smooth and paint.
#9
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,801
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 829 Post(s)
Liked 1,241 Times
in
655 Posts
this looks like a pretty severe crack to the glued on clincher bead. For sure look at the inside of the bead.
just based on the pic you shared I would not give $20 for them unless you were going to replace the rim
/markp
just based on the pic you shared I would not give $20 for them unless you were going to replace the rim
/markp
#10
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,627
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Any other pictures of the spot?