1"quill options
#1
Newbie
Thread Starter
Join Date: Oct 2006
Location: Dallas, Tx
Posts: 60
Bikes: Bianchi Oltre Xr4, Bianchi Proto, Pegoretti Duende, Rossin Ghibli, Rossin Record, Zullo, Tesch S-22, DeRosa SLX, Concorde Genius, Basso Ascot, Guerciotti TriStar, Meca Super Turbo, Pinarello Montello, 2 Masi Gran Criteriums,, Biemmezetta Cronostar
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Liked 106 Times
in
36 Posts
1"quill options
So I got my buddies old Steelman Stage Race frameset back and he is 30 years older now so he will need some rise to his stem. What are the brands/options now for a non-custom stem? TIG or forged aluminum. Nothing fancy or Ti. 26.0 bar dia.
#2
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,832
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2336 Post(s)
Liked 2,808 Times
in
1,534 Posts
nitto
beautiful, classic, strong
and if you need rise they have a model called a dirt drop
https://www.benscycle.com/nitto-mt11...tto_mt11_870/p
https://www.rivbike.com/products/nit...-0-8cm-or-10cm
https://www.somafabshop.com/shop/pro...7?category=820
beautiful, classic, strong
and if you need rise they have a model called a dirt drop
https://www.benscycle.com/nitto-mt11...tto_mt11_870/p
https://www.rivbike.com/products/nit...-0-8cm-or-10cm
https://www.somafabshop.com/shop/pro...7?category=820
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Last edited by squirtdad; 06-11-21 at 03:16 PM.
Likes For squirtdad:
#3
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,762
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2429 Post(s)
Liked 3,098 Times
in
1,953 Posts
nitto
beautiful, classic, strong
and if you need rise they have a model called a dirt drop
https://www.benscycle.com/nitto-mt11...tto_mt11_870/p
https://www.rivbike.com/products/nit...-0-8cm-or-10cm
https://www.somafabshop.com/shop/pro...7?category=820
beautiful, classic, strong
and if you need rise they have a model called a dirt drop
https://www.benscycle.com/nitto-mt11...tto_mt11_870/p
https://www.rivbike.com/products/nit...-0-8cm-or-10cm
https://www.somafabshop.com/shop/pro...7?category=820
I like the 90 degree velo orange quill as well. About the same price range, but for a larger bar, I guess.
https://velo-orange.com/collections/...ceplate-31-8mm
And the highly polished "quill stem" https://velo-orange.com/collections/.../vo-quill-stem
On a slight aside, the Cigne stem is somewhat intriguing for the right build...not sure what though!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#4
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,319
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 985 Times
in
518 Posts
A Nitto Technomic II is a 90 degree stem. Gives 17 degrees of rise. Sakae also made one.
#5
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,842
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2295 Post(s)
Liked 2,042 Times
in
1,251 Posts
#6
Senior Member
The 3 questions to answer are:
1. How much rise is needed?
1a. Reach? Not all the stems come in a wide range of reaches; also inventory can be tight these days.
2. Do you care whether it's a horizontal "7" stem or up-angled?
3. If you're open to a 31.8mm stem w/shim, there's lots more to choose from. I'm not a shim fan, but to each his own.
4. Not a Q but a caution: beware if stuffing a _very_ tall stem into a small bike/head tube. Head tubes are butted at the bottom, stem and/or wedge can get stuck if jammed down too far.
Nitto is at the top of my heap, and if you cruise through the Nitto section of Ben's Cycle, you'll find at least 5 stems that are native 26.0mm and have more rise than the average stem. They do start at fancy/$200+ for the lugged stem, but they go down to $50 or for the starter Technomics. From the top, they go: Lugged/Pearl/Technomic Deluxe Tall/Technomic Dlx Short/Technomic/Dynamic.
https://www.benscycle.com/stems-and-...to&searchState
There used to be a tig-welded Nitto UI-xx stem, can't recall the numbers, similar to the current UI-12, but 26.0mm and no removable faceplate. Slightly longer quill, and upward angle. Nice if you can fine 'em used.
I'm not sure what's happening with the Nitto Dynamic stem. The older/original had a not very tall quill, but a +angle, so you got a little more height than usual, but not a lot. These stems had a bottom/45-degree-ish bar clamp bolt. Now it looks like there's a "New Dynamic," with a horizontal top, maybe longer quill?I dunno, it confuses me and I'm tired, so no links on this. Ben's shows the older/original, newer one will pop up with a search.
Once you leave NittoLand, you're mostly in the world of Taiwanese tig'd stems. Nothing at all wrong with that/them, but not quite the same quality level as Nitto imho. This is also a world increasingly dominated by 31.8mm stems, so that question of whether shimming a 31.8 works or not comes in.
Velo Orange has a Gran Compe Ene stem in 26.0, which might be a Japanese stem. Also a tig'd Grand Cru, and a Quill, all in 26.0. The 2 GC stems are horizontal/"7" stems, the Quill has a rise.
https://velo-orange.com/collections/...ene-quill-stem
https://velo-orange.com/collections/...cru-quill-stem
https://velo-orange.com/collections/.../vo-quill-stem
I'm wore out, fg you pole around at Soma's site, they likely have something, too.
1. How much rise is needed?
1a. Reach? Not all the stems come in a wide range of reaches; also inventory can be tight these days.
2. Do you care whether it's a horizontal "7" stem or up-angled?
3. If you're open to a 31.8mm stem w/shim, there's lots more to choose from. I'm not a shim fan, but to each his own.
4. Not a Q but a caution: beware if stuffing a _very_ tall stem into a small bike/head tube. Head tubes are butted at the bottom, stem and/or wedge can get stuck if jammed down too far.
Nitto is at the top of my heap, and if you cruise through the Nitto section of Ben's Cycle, you'll find at least 5 stems that are native 26.0mm and have more rise than the average stem. They do start at fancy/$200+ for the lugged stem, but they go down to $50 or for the starter Technomics. From the top, they go: Lugged/Pearl/Technomic Deluxe Tall/Technomic Dlx Short/Technomic/Dynamic.
https://www.benscycle.com/stems-and-...to&searchState
There used to be a tig-welded Nitto UI-xx stem, can't recall the numbers, similar to the current UI-12, but 26.0mm and no removable faceplate. Slightly longer quill, and upward angle. Nice if you can fine 'em used.
I'm not sure what's happening with the Nitto Dynamic stem. The older/original had a not very tall quill, but a +angle, so you got a little more height than usual, but not a lot. These stems had a bottom/45-degree-ish bar clamp bolt. Now it looks like there's a "New Dynamic," with a horizontal top, maybe longer quill?I dunno, it confuses me and I'm tired, so no links on this. Ben's shows the older/original, newer one will pop up with a search.
Once you leave NittoLand, you're mostly in the world of Taiwanese tig'd stems. Nothing at all wrong with that/them, but not quite the same quality level as Nitto imho. This is also a world increasingly dominated by 31.8mm stems, so that question of whether shimming a 31.8 works or not comes in.
Velo Orange has a Gran Compe Ene stem in 26.0, which might be a Japanese stem. Also a tig'd Grand Cru, and a Quill, all in 26.0. The 2 GC stems are horizontal/"7" stems, the Quill has a rise.
https://velo-orange.com/collections/...ene-quill-stem
https://velo-orange.com/collections/...cru-quill-stem
https://velo-orange.com/collections/.../vo-quill-stem
I'm wore out, fg you pole around at Soma's site, they likely have something, too.
__________________
Fuggedaboutit!
Fuggedaboutit!
#7
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,825
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 797 Post(s)
Liked 694 Times
in
371 Posts
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#8
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,237 Times
in
653 Posts
Stems With Long Qillls In Shorter Frames
The 3 questions to answer are:
1. How much rise is needed?
1a. Reach? Not all the stems come in a wide range of reaches; also inventory can be tight these days.
2. Do you care whether it's a horizontal "7" stem or up-angled?
3. If you're open to a 31.8mm stem w/shim, there's lots more to choose from. I'm not a shim fan, but to each his own.
4. Not a Q but a caution: beware if stuffing a _very_ tall stem into a small bike/head tube. Head tubes are butted at the bottom, stem and/or wedge can get stuck if jammed down too far.
1. How much rise is needed?
1a. Reach? Not all the stems come in a wide range of reaches; also inventory can be tight these days.
2. Do you care whether it's a horizontal "7" stem or up-angled?
3. If you're open to a 31.8mm stem w/shim, there's lots more to choose from. I'm not a shim fan, but to each his own.
4. Not a Q but a caution: beware if stuffing a _very_ tall stem into a small bike/head tube. Head tubes are butted at the bottom, stem and/or wedge can get stuck if jammed down too far.
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)