Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Would you ride on a printed saddle?

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Would you ride on a printed saddle?

Old 03-27-22, 12:26 PM
  #1  
dilbert2000
Newbie
Thread Starter
 
dilbert2000's Avatar
 
Join Date: Apr 2020
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 35 Times in 12 Posts
Would you ride on a printed saddle?

I've had a lot of saddle pain for the 10 or so years I've been riding.
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.

If you had the money (I currently don't) would you buy one?

dilbert2000 is offline  
Old 03-27-22, 12:37 PM
  #2  
RNAV
Flyin' under the radar
 
RNAV's Avatar
 
Join Date: Jun 2010
Location: O'Fallon, IL
Posts: 830

Bikes: '15 LeMond Washoe custom painted, '06 LeMond Croix de fer custom painted, '18 Specialized Crux

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 168 Post(s)
Liked 58 Times in 23 Posts
I would, though it seems no one makes them narrow enough for me (132mm is about as wide as I can go; 128 to 130 is optimal). They're all 143mm or larger. The technology is pretty neat, and all the folks I've seen that have actually bought them tend to rave about them. Sounds like it'd be worth the shot given your situation.
RNAV is offline  
Likes For RNAV:
Old 03-27-22, 12:38 PM
  #3  
Mojo31
-------
 
Join Date: Jul 2020
Location: Tejas
Posts: 12,617
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9519 Post(s)
Liked 6,264 Times in 3,453 Posts
Not only would but did. I have the Fizik Antares Versus EVO R1 Adaptive. It works as advertised. Mine is the 139mm version.

I originally wanted to go the Specialized Power route, but the rails don't play well with my Trek bike.
Mojo31 is offline  
Likes For Mojo31:
Old 03-27-22, 01:51 PM
  #4  
zandoval 
Senior Member
 
zandoval's Avatar
 
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,416

Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 928 Post(s)
Liked 1,594 Times in 1,020 Posts
If I had the money would I buy one? Sure... if only to try it out.

It's about time for us to get really into printing our saddles. We could take a 3D scan of our buttox in addition to a pressure point identification device then us an AI program to calculate a suitable seat that could be printed out right there in the shop.
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
zandoval is offline  
Likes For zandoval:
Old 03-27-22, 02:47 PM
  #5  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
Yes.
WhyFi is offline  
Likes For WhyFi:
Old 03-27-22, 04:12 PM
  #6  
Sy Reene
Advocatus Diaboli
 
Sy Reene's Avatar
 
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,611

Bikes: Merlin Cyrene, Nashbar steel CX

Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4717 Post(s)
Liked 1,526 Times in 997 Posts
So these aren't actually custom printed to your dimensions, but are off the shelf?

Not quite the same, but some similarities with overall type of construction -- I had a few years ago an interest in the Tioga Spyder designs. Think of them as a poor man's version of these printed versions. I may still want to try these out some day. https://www.tiogausa.com/saddles-main.html
Sy Reene is offline  
Likes For Sy Reene:
Old 03-27-22, 04:12 PM
  #7  
tempocyclist
Senior Member
 
tempocyclist's Avatar
 
Join Date: Jun 2021
Location: Australia
Posts: 815

Bikes: 2002 Trek 5200 (US POSTAL), 2020 Canyon Aeroad SL

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 309 Post(s)
Liked 664 Times in 324 Posts
Sure would! 😎
tempocyclist is offline  
Likes For tempocyclist:
Old 03-27-22, 04:46 PM
  #8  
robbyville
Senior Member
 
robbyville's Avatar
 
Join Date: Nov 2012
Location: Palm Desert, CA
Posts: 2,504

Bikes: Speedvagen Steel

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 429 Post(s)
Liked 248 Times in 156 Posts
Yup, I’m fact I’ve tried and still technically own both. Thread below…
the Fizik is with a friend in case he wants to buy it, the Specialized has worked out incredibly well.

https://www.bikeforums.net/road-cycl...ime-again.html
robbyville is offline  
Likes For robbyville:
Old 03-27-22, 05:23 PM
  #9  
dilbert2000
Newbie
Thread Starter
 
dilbert2000's Avatar
 
Join Date: Apr 2020
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 35 Times in 12 Posts
Originally Posted by Sy Reene
So these aren't actually custom printed to your dimensions, but are off the shelf?
Correct
dilbert2000 is offline  
Old 03-27-22, 07:13 PM
  #10  
Mojo31
-------
 
Join Date: Jul 2020
Location: Tejas
Posts: 12,617
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9519 Post(s)
Liked 6,264 Times in 3,453 Posts
Originally Posted by zandoval
If I had the money would I buy one? Sure... if only to try it out.

It's about time for us to get really into printing our saddles. We could take a 3D scan of our buttox in addition to a pressure point identification device then us an AI program to calculate a suitable seat that could be printed out right there in the shop.
Not likely to happen in your lifetime.
Mojo31 is offline  
Likes For Mojo31:
Old 03-27-22, 07:28 PM
  #11  
mschwett 
Senior Member
 
Join Date: May 2021
Location: San Francisco
Posts: 2,028

Bikes: addict, aethos, creo, vanmoof, sirrus, public ...

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1272 Post(s)
Liked 1,382 Times in 707 Posts
i have both of the specialized ones, on two different bikes. the right fit/size/position/shape is still more important, but once you get that right, it's pretty awesome. manages to be supportive where needed and soft where needed at the same time. the shape of the "power mirror" chafes me a bit where leg meets not-leg... but the romin EVO with mirror, that one is perfection.
mschwett is offline  
Likes For mschwett:
Old 03-28-22, 05:42 AM
  #12  
PeteHski
Senior Member
 
PeteHski's Avatar
 
Join Date: May 2021
Posts: 8,172
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4272 Post(s)
Liked 4,707 Times in 2,907 Posts
Originally Posted by Sy Reene
So these aren't actually custom printed to your dimensions, but are off the shelf?
That's right. It's just an alternative kind of multi-density "padding"
PeteHski is online now  
Old 03-28-22, 05:46 AM
  #13  
datlas 
Should Be More Popular
 
datlas's Avatar
 
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 42,952

Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix

Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22507 Post(s)
Liked 8,829 Times in 4,110 Posts
I am too much of a cheapskate to spend that much money,

However, one of my club-mates rides one and he really likes it.
__________________
Originally Posted by rjones28
Addiction is all about class.
datlas is offline  
Likes For datlas:
Old 03-28-22, 05:51 AM
  #14  
PeteHski
Senior Member
 
PeteHski's Avatar
 
Join Date: May 2021
Posts: 8,172
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4272 Post(s)
Liked 4,707 Times in 2,907 Posts
Originally Posted by dilbert2000
I've had a lot of saddle pain for the 10 or so years I've been riding.
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.

If you had the money (I currently don't) would you buy one?
My guess is that this wouldn't solve your issue. Perpetual saddle swappers never seem to find their nirvana. For you to record the highest saddle pressure ever means that either you were very heavy and/or have a very small contact point (Pressure = Force/Area). If you've already tried loads of saddles and lost a load of weight, then this will likely just be another saddle. The shape of it will still dominate the way it feels, although to be fair I've never tried one personally.
PeteHski is online now  
Likes For PeteHski:
Old 03-28-22, 05:59 AM
  #15  
GhostRider62
Senior Member
 
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2332 Post(s)
Liked 2,094 Times in 1,311 Posts
Originally Posted by dilbert2000
I've had a lot of saddle pain for the 10 or so years I've been riding.
Tried lots of different saddles.
I've been overweight and very thin - no difference.
I had a pressure mapping, and they were surprised at the amount of pressure I put on the saddle - this was as part of a full fitting, so I was positioned correctly. They said it was the highest value they had seen.

If you had the money (I currently don't) would you buy one?

https://www.youtube.com/watch?v=k48UM6xFDrE
I have the money and No, I wouldn't waste my time.

Have you tried a full leather saddle like a Brooks or Berthoud? If so, did you give it time to break in? Such a saddle will conform to your shape. Add good bibs and lube, and you should be GTG. Is your pain pressure or chafing? Or both?
GhostRider62 is offline  
Old 03-28-22, 06:59 AM
  #16  
dilbert2000
Newbie
Thread Starter
 
dilbert2000's Avatar
 
Join Date: Apr 2020
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 35 Times in 12 Posts
Originally Posted by GhostRider62
Have you tried a full leather saddle like a Brooks or Berthoud?
I haven't tried one.

Originally Posted by GhostRider62
Add good bibs and lube, and you should be GTG.
I tried a couple pair of high end Assos, and usually use chamois creme.

Originally Posted by GhostRider62
Is your pain pressure or chafing? Or both?
Pressure
dilbert2000 is offline  
Old 03-28-22, 07:02 AM
  #17  
GhostRider62
Senior Member
 
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2332 Post(s)
Liked 2,094 Times in 1,311 Posts
Originally Posted by dilbert2000
I haven't tried one.



I tried a couple pair of high end Assos, and usually use chamois creme.



Pressure
If the pressure is on your sit bones, you might consider trying a Brooks or Berthoud saddle. The leather will eventually conform to your unique shape and therefore disperse the pressure over a much wider area than other saddles, sort of like having a custom printed saddle except your butt is the printer.
GhostRider62 is offline  
Likes For GhostRider62:
Old 03-28-22, 12:27 PM
  #18  
Branko D
Senior Member
 
Join Date: Feb 2018
Posts: 786
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 338 Post(s)
Liked 408 Times in 252 Posts
Leather tensioned saddles are overrated in my experience. I tossed one in the bin after 12000km and went to Specialized saddles (Power on road and gravel, Sitero on TT bike). All day comfort, even riding in an aggressive position in the drops (cutout ftw) and light to boot.

Imo, if the problem is pressure and it won't go away and you need a narrow saddle on top, lower the saddle.

Last edited by Branko D; 03-28-22 at 12:32 PM.
Branko D is offline  
Likes For Branko D:
Old 03-28-22, 12:31 PM
  #19  
GhostRider62
Senior Member
 
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2332 Post(s)
Liked 2,094 Times in 1,311 Posts
And I tossed every Spesh saddle I have bought.

If leather saddles are so overrated, why are they so common amongst long distance riders. (?)

OP should also verify that saddle height isn't too high
GhostRider62 is offline  
Likes For GhostRider62:
Old 03-28-22, 03:08 PM
  #20  
Branko D
Senior Member
 
Join Date: Feb 2018
Posts: 786
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 338 Post(s)
Liked 408 Times in 252 Posts
Fashion, to a degree. They undoubtedly work for some, but for me personally they are no more comfortable.

The local randonneur community is pretty big on Infinity saddles (I got one for my wife, too), and I know lots of long distance riders who rock conventional saddles and have no issues with them.
​​​​​
Branko D is offline  
Likes For Branko D:
Old 03-28-22, 03:09 PM
  #21  
sfrider 
Asleep at the bars
 
sfrider's Avatar
 
Join Date: May 2006
Location: San Francisco, CA and Treasure Island, FL
Posts: 1,743
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 203 Times in 135 Posts
Absolutely. Especially if combined with a professional fitting!
__________________
"This 7:48 cycling session burned 5933 calories. Speed up recovery by replacing them with a healthy snack." - Whoop

sfrider is offline  
Likes For sfrider:
Old 03-28-22, 03:11 PM
  #22  
sfrider 
Asleep at the bars
 
sfrider's Avatar
 
Join Date: May 2006
Location: San Francisco, CA and Treasure Island, FL
Posts: 1,743
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 203 Times in 135 Posts
Originally Posted by Branko D
Fashion, to a degree. They undoubtedly work for some, but for me personally they are no more comfortable.

The local randonneur community is pretty big on Infinity saddles, and I know lots of long distance riders who rock conventional saddles and have no issues with them.
This may all just reflect self-selection, in other words people who never find saddle comfort no matter the saddle will never be cross-country or long distance riders.
__________________
"This 7:48 cycling session burned 5933 calories. Speed up recovery by replacing them with a healthy snack." - Whoop

sfrider is offline  
Likes For sfrider:
Old 03-29-22, 09:04 AM
  #23  
easyupbug 
Senior Member
 
Join Date: Jan 2013
Posts: 2,652

Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 560 Post(s)
Liked 546 Times in 396 Posts
I likely will as I got a cheap Chinese nock off of the design on a nice frame and was very surprised by the reasonably comfortable miles spent getting the bike built up and tuned. It is silly to claim this or that saddle is over rated, every body is different. With nearly 70 years on bikes, maybe 20 or more saddles in the shop and maybe 100 bicycles coming and going over the years I am a suspension Selle Anatomica guy as they always work for me, with the exception of their rubber version.
easyupbug is offline  
Old 03-29-22, 11:29 AM
  #24  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,535

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10898 Post(s)
Liked 7,386 Times in 4,145 Posts
Originally Posted by RNAV
I would, though it seems no one makes them narrow enough for me (132mm is about as wide as I can go; 128 to 130 is optimal). They're all 143mm or larger. The technology is pretty neat, and all the folks I've seen that have actually bought them tend to rave about them. Sounds like it'd be worth the shot given your situation.
And here I am on the opposite side- I use C17 saddles that measure out to 164mm wide and last I checked, no 3d off the shelf saddles were that width or shape. The 135-150mm width was the sweetspot for stock 3d printed saddles when I read about them.
mstateglfr is online now  
Old 03-29-22, 01:15 PM
  #25  
Mojo31
-------
 
Join Date: Jul 2020
Location: Tejas
Posts: 12,617
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9519 Post(s)
Liked 6,264 Times in 3,453 Posts
I'm a skinny assed dude. My printed saddle is a 139.
Mojo31 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.