FS: (Mostly) French Parts Clear Out
03-05-23, 02:15 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Corvallis, OR
Posts: 1,234
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 243 Times
in
114 Posts
FS: (Mostly) French Parts Clear Out
Up for grabs are a number of parts, mostly French, that I acquired quite a few years ago. Some of these parts are much older than I am used to working with (front/rear derailleur are a good example). But, if anyone can put them to good use, it’s this group.
Individual prices do not include shipping since some want more than one part. We can work that out depending on how many parts you want and where in the USA you are. Sorry, no international shipping.
=======================================================
Stronglight P3 Headset
Specs: 1" threaded, Crown Race inside diameter: 26.5mm
Condition: Sharp teeth, deep, gorgeous knurling and unmarked this beauty has all character you need for your build and none of the corrosion usually seen from a set of this vintage. Typically, Stronglight splashes branding all over but this appears to be a P3, made somewhere between the 1950s and early 1980s is absent of any markings. The knurled upper race mating to a toothed lockring is on point for the P3, as is the style of the octagonal locknut. The crown race I.D. measures 26.8mm.
Overall, the headset has beautiful patina of age, not neglect and the only major blemish I can find is the tiniest chip in one of the races. I circled it in one of the images below. All pieces have been ultrasonically cleaned ready to install, after some fresh grease, once you receive it.
Images here
Price: $20
=======================================================
Huret Luxe Wing Nuts (4)
Specs: 3/8” thread hole
Condition: Fantastic Huret Luxe wing nuts set (4). Chrome with brass threads and three are in beautiful shape. One has some of the chrome coming off, which is highlighted in the photographs.
Images here
Price: $20/set of 4
=======================================================
PayPal (F&F free or 4% paid by buyer), Venmo or Zelle accepted.
Individual prices do not include shipping since some want more than one part. We can work that out depending on how many parts you want and where in the USA you are. Sorry, no international shipping.
=======================================================
Stronglight P3 Headset
Specs: 1" threaded, Crown Race inside diameter: 26.5mm
Condition: Sharp teeth, deep, gorgeous knurling and unmarked this beauty has all character you need for your build and none of the corrosion usually seen from a set of this vintage. Typically, Stronglight splashes branding all over but this appears to be a P3, made somewhere between the 1950s and early 1980s is absent of any markings. The knurled upper race mating to a toothed lockring is on point for the P3, as is the style of the octagonal locknut. The crown race I.D. measures 26.8mm.
Overall, the headset has beautiful patina of age, not neglect and the only major blemish I can find is the tiniest chip in one of the races. I circled it in one of the images below. All pieces have been ultrasonically cleaned ready to install, after some fresh grease, once you receive it.
Images here
Price: $20
=======================================================
Huret Luxe Wing Nuts (4)
Specs: 3/8” thread hole
Condition: Fantastic Huret Luxe wing nuts set (4). Chrome with brass threads and three are in beautiful shape. One has some of the chrome coming off, which is highlighted in the photographs.
Images here
Price: $20/set of 4
=======================================================
PayPal (F&F free or 4% paid by buyer), Venmo or Zelle accepted.
__________________
The Simplicity of Vintage Cycles
The Simplicity of Vintage Cycles
Last edited by The Thin Man; 04-29-23 at 10:33 AM.
03-05-23, 02:38 PM
#3
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Corvallis, OR
Posts: 1,234
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 243 Times
in
114 Posts
Great question. Sorry about not providing that critical information.
Sadly, they are all English threaded. I've also updated the ad.
Sadly, they are all English threaded. I've also updated the ad.
__________________
The Simplicity of Vintage Cycles
The Simplicity of Vintage Cycles
Likes For The Thin Man:
03-10-23, 01:14 AM
#4
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Corvallis, OR
Posts: 1,234
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 243 Times
in
114 Posts
Sending this one back up to the top with a new addition of the Stronglight headset and some updated pricing to woo those of you on the fence.
__________________
The Simplicity of Vintage Cycles
The Simplicity of Vintage Cycles
03-11-23, 12:41 PM
#5
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Corvallis, OR
Posts: 1,234
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 243 Times
in
114 Posts
Updated list with more items
__________________
The Simplicity of Vintage Cycles
The Simplicity of Vintage Cycles
Last edited by The Thin Man; 03-16-23 at 11:05 PM.
04-07-23, 05:35 PM
#6
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Corvallis, OR
Posts: 1,234
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 243 Times
in
114 Posts
Time to move these goodies!
Prices adjusted yet again but the real deal is the full lot purchase.
I'm open to negotiations. I just want these items to be used and they aren't getting that with me.
Prices adjusted yet again but the real deal is the full lot purchase.
I'm open to negotiations. I just want these items to be used and they aren't getting that with me.
__________________
The Simplicity of Vintage Cycles
The Simplicity of Vintage Cycles
