ISO and for trade thread part 5
#5126
Senior Member
Join Date: Oct 2009
Posts: 1,108
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 286 Post(s)
Liked 314 Times
in
155 Posts
Rooney I have a 19" Univega step through with CrMo tubes that takes 700c wheels. The shiny red paint is beat, but it could make a sweet cruiser. I'd bet 35s would clear no problem. But I suppose it isn't what you were asking for...
#5128
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,829
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2287 Post(s)
Liked 2,028 Times
in
1,244 Posts
I'm looking for a 19-21" mixte frameset that can accommodate 650x42b tires with fenders.
My mom decided she wanted a bike after I got the rest of the family riding again, and she really liked the look of the dual top tubes on my girlfriend's mixte. Something at the level of a Motobecane Grand Jubilee would be great, but I realize 650b mixtes less common. My mom's not super picky but if I could find something with lighter-weight tubing I'm sure she'd be appreciative.
My mom decided she wanted a bike after I got the rest of the family riding again, and she really liked the look of the dual top tubes on my girlfriend's mixte. Something at the level of a Motobecane Grand Jubilee would be great, but I realize 650b mixtes less common. My mom's not super picky but if I could find something with lighter-weight tubing I'm sure she'd be appreciative.
Now this Centurion was designed around 630 wheels so it may take a fat 700c. I'm going to look at it again on Sunday.
#5130
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,829
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2287 Post(s)
Liked 2,028 Times
in
1,244 Posts
Likes For clubman:
#5131
Senior Member
I'm looking for a 19-21" mixte frameset that can accommodate 650x42b tires with fenders.
My mom decided she wanted a bike after I got the rest of the family riding again, and she really liked the look of the dual top tubes on my girlfriend's mixte. Something at the level of a Motobecane Grand Jubilee would be great, but I realize 650b mixtes less common. My mom's not super picky but if I could find something with lighter-weight tubing I'm sure she'd be appreciative.
My mom decided she wanted a bike after I got the rest of the family riding again, and she really liked the look of the dual top tubes on my girlfriend's mixte. Something at the level of a Motobecane Grand Jubilee would be great, but I realize 650b mixtes less common. My mom's not super picky but if I could find something with lighter-weight tubing I'm sure she'd be appreciative.
__________________
Be where your feet are.......Lisa Bluder
Be where your feet are.......Lisa Bluder
Likes For r0ckh0und:
#5132
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 8,680
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1589 Post(s)
Liked 2,486 Times
in
1,188 Posts
I don't see them too often. Guess you could have someone modify the bike for your purpose.
Or... https://sfbay.craigslist.org/sfc/bik/7518822831.html
Or... https://sfbay.craigslist.org/sfc/bik/7518822831.html
Soma Buena Vista - $1,600 (San Francisco)
‹image 1 of 11›
#5133
Senior Member
I did replace the wheels and consumables on this one but otherwise stock.
__________________
Be where your feet are.......Lisa Bluder
Be where your feet are.......Lisa Bluder
#5134
Senior Member
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,573 Times
in
2,580 Posts
You can get this Raleigh mixte in the Boston area plus a free broken sewing machine!
https://boston.craigslist.org/gbs/bi...512341619.html
https://boston.craigslist.org/gbs/bi...512341619.html
#5135
mycocyclist
Join Date: Dec 2016
Location: Monkey Junction, Wilmington, NC
Posts: 2,239
Bikes: 1964 Schwinn Paramount P-13 DeLuxe, 1964 Schwinn Sport Super Sport, 1972 Falcon San Remo, 1974 Maserati MT-1, 1974 Raleigh International, 1984 Lotus Odyssey, 198? Rossin Ghibli, 1990 LeMond Le Vanquer (sic), 1991 Specialized Allez Transition Pro, +
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 901 Post(s)
Liked 802 Times
in
441 Posts
Two Birds, One Hard Of Heron...
#5136
Full Member
Join Date: Apr 2018
Location: NYC
Posts: 402
Bikes: '72 Raleigh Super Course; '90 Cannondale ST1000; '98/99 Cannondale T700; 2002 Cannondale CAAD5 R700; 2022 Cannondale Topstone 2L
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 162 Post(s)
Liked 337 Times
in
152 Posts
I appreciate all the options provided. I don’t know that any seem like exactly what we’re looking for, although the idea of building up one of those Soma Buena Vistas is appealing. Seems like it may be less hassle than finding an ideal 650b conversion candidate too since it’s already designed for it.
#5137
Newbie
While searching for a Schwinn Bottom Bracket conversion spindle for my '64 Sport Super Sport, and a single center chainring bolt for my new old ta specialites crank, chanced across this seller who has two Raleigh Headbadges each for less then $22 delivered.
#5138
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,934
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,071 Times
in
633 Posts
Here's one of those minor-yet-important irritants that puts an entire project on hold. Open to requests for any couple of small items that I might have in exchange. I need two rear axle spacers. Could be either 2mm or 3mm. Yeah, I could probably run down to Ace and get something close or buy some of the pure gold ones I see for sale online, but figured I'd check here first.
Found just what I needed at Ace. Thanks.
Found just what I needed at Ace. Thanks.
__________________
In search of what to search for.
In search of what to search for.
Last edited by USAZorro; 08-26-22 at 01:48 PM. Reason: No longer needed
#5139
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,691
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 510 Post(s)
Tagged: 0 Thread(s)
Quoted: 7287 Post(s)
Liked 2,361 Times
in
1,380 Posts
I'm looking for a 19-21" mixte frameset that can accommodate 650x42b tires with fenders.
My mom decided she wanted a bike after I got the rest of the family riding again, and she really liked the look of the dual top tubes on my girlfriend's mixte. Something at the level of a Motobecane Grand Jubilee would be great, but I realize 650b mixtes less common. My mom's not super picky but if I could find something with lighter-weight tubing I'm sure she'd be appreciative.
My mom decided she wanted a bike after I got the rest of the family riding again, and she really liked the look of the dual top tubes on my girlfriend's mixte. Something at the level of a Motobecane Grand Jubilee would be great, but I realize 650b mixtes less common. My mom's not super picky but if I could find something with lighter-weight tubing I'm sure she'd be appreciative.
Photos
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#5140
Senior Member
Join Date: Aug 2007
Location: Evanston, IL
Posts: 5,859
Bikes: many
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 1434 Post(s)
Liked 1,362 Times
in
747 Posts
Here's one of those minor-yet-important irritants that puts an entire project on hold. Open to requests for any couple of small items that I might have in exchange. I need two rear axle spacers. Could be either 2mm or 3mm. Yeah, I could probably run down to Ace and get something close or buy some of the pure gold ones I see for sale online, but figured I'd check here first.
#5142
Senior Member
Join Date: Jul 2018
Location: WNY
Posts: 505
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 172 Post(s)
Liked 304 Times
in
159 Posts
Looking for one each of the following:
Simplex brake cable clip
Weinmann brake cable clip
Brake cable adjuster screw and nut for the first generation Carrera sidepull brake.
1st generation Carrera
I have extra DuraAce and Shimano cable clips as well as $$.
Simplex brake cable clip
Weinmann brake cable clip
Brake cable adjuster screw and nut for the first generation Carrera sidepull brake.
1st generation Carrera
I have extra DuraAce and Shimano cable clips as well as $$.
__________________
72+76 Super Course, 74 P-10+ 79 Tandem Paramounts, 84 Raleigh Alyeska, 84 Voyageur SP, 85 Miyata Sport 10 mixte and a queue
72+76 Super Course, 74 P-10+ 79 Tandem Paramounts, 84 Raleigh Alyeska, 84 Voyageur SP, 85 Miyata Sport 10 mixte and a queue
#5143
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,958
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1420 Post(s)
Liked 1,038 Times
in
769 Posts
Has the nut but minus the screw.
PM me if you want it.
#5144
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,359
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 979 Times
in
514 Posts
https://philadelphia.craigslist.org/...512370946.html
https://images.craigslist.org/00n0n_...t2_600x450.jpg
https://images.craigslist.org/00n0n_...t2_600x450.jpg
__________________
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
#5145
KillBosby144
Join Date: May 2022
Location: Pennsylvania of late
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
RE: 600 Toe clips
#5146
KillBosby144
Join Date: May 2022
Location: Pennsylvania of late
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
RE: 600 Toe clips
regards the 600 toe clips. Let me know if you're still looking.
#5147
Senior Member
Not positive if this is truly C&V, but here goes anyway.
Looking for the upper fixed race (e.g., the part that's pressed into the top of the headtube) for a Tange Levin CDS headset. Can't find one online unless I want to buy a complete headset.
If anyone out there has an extra upper fixed race from a Tange Levin-series headset and can spare it, please PM me. (I might also be able to use one from the Passage series, but current versions of the upper fixed race for the Passage are slightly shorter and I want to preserve stack height if I can.)
My trade parts stash is meager, but let me know what you need/want - you never know. Also have $ if it comes to that.
Looking for the upper fixed race (e.g., the part that's pressed into the top of the headtube) for a Tange Levin CDS headset. Can't find one online unless I want to buy a complete headset.
If anyone out there has an extra upper fixed race from a Tange Levin-series headset and can spare it, please PM me. (I might also be able to use one from the Passage series, but current versions of the upper fixed race for the Passage are slightly shorter and I want to preserve stack height if I can.)
My trade parts stash is meager, but let me know what you need/want - you never know. Also have $ if it comes to that.
#5148
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,934
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,071 Times
in
633 Posts
Not positive if this is truly C&V, but here goes anyway.
Looking for the upper fixed race (e.g., the part that's pressed into the top of the headtube) for a Tange Levin CDS headset. Can't find one online unless I want to buy a complete headset.
If anyone out there has an extra upper fixed race from a Tange Levin-series headset and can spare it, please PM me. (I might also be able to use one from the Passage series, but current versions of the upper fixed race for the Passage are slightly shorter and I want to preserve stack height if I can.)
My trade parts stash is meager, but let me know what you need/want - you never know. Also have $ if it comes to that.
Looking for the upper fixed race (e.g., the part that's pressed into the top of the headtube) for a Tange Levin CDS headset. Can't find one online unless I want to buy a complete headset.
If anyone out there has an extra upper fixed race from a Tange Levin-series headset and can spare it, please PM me. (I might also be able to use one from the Passage series, but current versions of the upper fixed race for the Passage are slightly shorter and I want to preserve stack height if I can.)
My trade parts stash is meager, but let me know what you need/want - you never know. Also have $ if it comes to that.
Which size?
__________________
In search of what to search for.
In search of what to search for.
Last edited by USAZorro; 08-27-22 at 10:26 AM.
#5149
Senior Member
#5150
Senior Member
Join Date: Jun 2021
Posts: 1,823
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 756 Post(s)
Liked 1,535 Times
in
745 Posts
ISO rear tandem hub, 140mm...
Looking for a 140mm OLD tandem hub, threaded for a drum brake, cassette (but freewheel could work, too). thx