Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Rim cracks

Old 10-20-21, 11:50 AM
  #1  
IPassGas
Full Member
Thread Starter
 
Join Date: Feb 2015
Location: Pittsburgh, PA
Posts: 397

Bikes: Schwinn, Nishiki, Santana, Trek, Rodriguez

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 187 Post(s)
Likes: 0
Liked 106 Times in 69 Posts
Rim cracks

I built wheels for our tandem using Ryde Andra 35 rims, 36 Saprim butted spokes, and Saprim polyax nipples. Sadly….After 7000 miles, much of which was heavily loaded, 4 of the spoke holes in the rear wheel have developed 5 mm long hairline cracks in the rim (not easy to see or photograph). The spokes are not next to each other, but in very different parts. The wheel remains perfectly true with average tension of 105 kgf (both sides, Rohloff) with 15% variation.

The cracks are very fine and I wonder if these are just superficial cracks in the anodized surface coating, is that possible? If not superficial, I am surprised since the rims are stout. Should I have used nipple washers? I suppose it is not worth the time to save the rim by adding nipple washers after the fact. Thanks for your comments in advance.
IPassGas is offline  
Old 10-20-21, 02:37 PM
  #2  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
SAPIM...no 'r'. The rims are most likely toast but your lack of photos doesn't help.
cxwrench is offline  
Likes For cxwrench:
Old 10-20-21, 04:57 PM
  #3  
holytrousers
hoppipola
 
holytrousers's Avatar
 
Join Date: Aug 2016
Posts: 423

Bikes: fausto coppi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Liked 227 Times in 163 Posts
No even the slightest deformation around the cracks ?
holytrousers is offline  
Old 10-20-21, 04:57 PM
  #4  
IPassGas
Full Member
Thread Starter
 
Join Date: Feb 2015
Location: Pittsburgh, PA
Posts: 397

Bikes: Schwinn, Nishiki, Santana, Trek, Rodriguez

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 187 Post(s)
Likes: 0
Liked 106 Times in 69 Posts
Originally Posted by cxwrench
SAPIM...no 'r'. The rims are most likely toast but your lack of photos doesn't help.
no r, got it. I was able to get this pic. There are 4 of the same size.

IPassGas is offline  
Old 10-20-21, 05:03 PM
  #5  
IPassGas
Full Member
Thread Starter
 
Join Date: Feb 2015
Location: Pittsburgh, PA
Posts: 397

Bikes: Schwinn, Nishiki, Santana, Trek, Rodriguez

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 187 Post(s)
Likes: 0
Liked 106 Times in 69 Posts
Originally Posted by holytrousers
No even the slightest deformation around the cracks ?
Interesting... good question. Looking across the planar surface of the rim, across the crack, not even a slight deformation of the surface.
IPassGas is offline  
Old 10-20-21, 05:09 PM
  #6  
holytrousers
hoppipola
 
holytrousers's Avatar
 
Join Date: Aug 2016
Posts: 423

Bikes: fausto coppi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Liked 227 Times in 163 Posts
Originally Posted by IPassGas
Interesting... good question. Looking across the planar surface of the rim, across the crack, not even a slight deformation of the surface.
Then i would suggest loosening very slightly those nipples (not enough to change the truing) and hope they won't get any worse.
holytrousers is offline  
Old 10-20-21, 05:14 PM
  #7  
randallr
Full Member
 
Join Date: Aug 2012
Location: Broomfield, Colorado
Posts: 491

Bikes: 2017 Gunnar CrossHairs Rohloff, 2022 Detroit Bikes Cortello

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 131 Post(s)
Liked 155 Times in 89 Posts
I don't know if it's any help, but here's a shot of my wife's Bontrager rear rim cracked after five years of gentle riding. She was riding this w/o incident on the rear wheel until a shop spotted it and we replaced it with Mavic. There were maybe ten cracks, this was the worst of the bunch. From a single bike.



Last edited by randallr; 10-20-21 at 05:16 PM. Reason: addition
randallr is offline  
Old 10-20-21, 05:17 PM
  #8  
IPassGas
Full Member
Thread Starter
 
Join Date: Feb 2015
Location: Pittsburgh, PA
Posts: 397

Bikes: Schwinn, Nishiki, Santana, Trek, Rodriguez

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 187 Post(s)
Likes: 0
Liked 106 Times in 69 Posts
Originally Posted by holytrousers
No even the slightest deformation around the cracks ?
And a pic across the surface of the crack.
IPassGas is offline  
Likes For IPassGas:
Old 10-20-21, 05:42 PM
  #9  
canopus 
Senior Member
 
canopus's Avatar
 
Join Date: Mar 2009
Location: Kingwood, TX
Posts: 1,592

Bikes: Road, Touring, BMX, Cruisers...

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 135 Post(s)
Liked 172 Times in 110 Posts
a cracks a crack, no pic necessary, especially on a hardened anodized rim. plan for a replacement. not sure if washers would have helped or not. but usually, it is either overloading, or overtension. i never did really like the hardened anodizing either. personal experience i have seen alot of cracks in rims that did that, way more than a painted or polished rim.
__________________
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
canopus is offline  
Likes For canopus:
Old 10-20-21, 06:00 PM
  #10  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 17,960

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4153 Post(s)
Liked 3,751 Times in 2,245 Posts
Al anodizing is harder and thus less flexible then the underlying Al rim. So it will generally crack before the base material does. But the qualifier is "before". In time the crack in the ano will be the stress riser for the base Al to start that crack at. Once a rim crack starts it's only time before that spoke hole won't support the nipple. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Likes For Andrew R Stewart:
Old 10-20-21, 06:20 PM
  #11  
IPassGas
Full Member
Thread Starter
 
Join Date: Feb 2015
Location: Pittsburgh, PA
Posts: 397

Bikes: Schwinn, Nishiki, Santana, Trek, Rodriguez

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 187 Post(s)
Likes: 0
Liked 106 Times in 69 Posts
Originally Posted by Andrew R Stewart
Al anodizing is harder and thus less flexible then the underlying Al rim. So it will generally crack before the base material does. But the qualifier is "before". In time the crack in the ano will be the stress riser for the base Al to start that crack at. Once a rim crack starts it's only time before that spoke hole won't support the nipple. Andy
Thanks, so perhaps I can mitigate the problem by backing off 1/8 or 1/4 turn on all spokes?
IPassGas is offline  
Old 10-20-21, 06:26 PM
  #12  
LeeG
Senior Member
 
Join Date: Sep 2008
Posts: 5,198
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Likes: 0
Liked 81 Times in 64 Posts
Just how loaded is “heavily loaded?”

I’ll defer to folks who have experience with that rim and similar cracks. My $.02 is the cracks in the anodizing may not necessarily be a precurssor to failure of the rim.

Those are such heavy rims. Did the rim have to go through severe a re-truing some time in it’s early miles?
LeeG is offline  
Old 10-20-21, 06:32 PM
  #13  
zandoval 
Senior Member
 
zandoval's Avatar
 
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,391

Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 907 Post(s)
Liked 1,568 Times in 1,010 Posts
Well if ya don't replace it you certainly should check it more than frequently. Really looks like an area of potential dangerous failure..

__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
zandoval is offline  
Old 10-20-21, 06:43 PM
  #14  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,119

Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 842 Post(s)
Liked 1,148 Times in 664 Posts
Quit goofing around.
just toss it.

will you really be comfortable riding it ever again!

Barry
Barry2 is offline  
Likes For Barry2:
Old 10-20-21, 06:57 PM
  #15  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,620

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,559 Times in 1,574 Posts
Disappointing for such a beefy rim!
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 10-20-21, 07:00 PM
  #16  
IPassGas
Full Member
Thread Starter
 
Join Date: Feb 2015
Location: Pittsburgh, PA
Posts: 397

Bikes: Schwinn, Nishiki, Santana, Trek, Rodriguez

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 187 Post(s)
Likes: 0
Liked 106 Times in 69 Posts
If the rim should be replaced, I'm not sure what would be much better for this to not happen again. The rim is one of the strongest on the market, but apparently not sufficiently strong for two people and their camping gear, etc. And so my question regarding nipple washers. I should have used washers.
IPassGas is offline  
Old 10-20-21, 07:06 PM
  #17  
holytrousers
hoppipola
 
holytrousers's Avatar
 
Join Date: Aug 2016
Posts: 423

Bikes: fausto coppi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Liked 227 Times in 163 Posts
Originally Posted by IPassGas
If the rim should be replaced, I'm not sure what would be much better for this to not happen again. The rim is one of the strongest on the market, but apparently not sufficiently strong for two people and their camping gear, etc. And so my question regarding nipple washers. I should have used washers.
Or maybe 15% variation is simply too much, and you should be aiming for less next time ?
holytrousers is offline  
Old 10-20-21, 08:06 PM
  #18  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 17,960

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4153 Post(s)
Liked 3,751 Times in 2,245 Posts
Originally Posted by zandoval
Well if ya don't replace it you certainly should check it more than frequently. Really looks like an area of potential dangerous failure..

https://youtu.be/BanSukpRKKc

Actually IME spoke pull throughs are relatively non incident related/causing. Having seen dozens over the years and many (maybe most) were not even noticed by the rider till we pointed them out. Often during a annual servicing of their bike. And we do ask if there's any issues with the bike they know of that we need to focus on at the time of the service ticket write up. The usual early indications (other then the obvious visual) are a rim that won't stay true. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Likes For Andrew R Stewart:
Old 10-20-21, 08:42 PM
  #19  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 7,741
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 6866 Post(s)
Liked 10,827 Times in 4,621 Posts
Originally Posted by Andrew R Stewart
Actually IME spoke pull throughs are relatively non incident related/causing. Having seen dozens over the years and many (maybe most) were not even noticed by the rider till we pointed them out. Often during a annual servicing of their bike. And we do ask if there's any issues with the bike they know of that we need to focus on at the time of the service ticket write up. The usual early indications (other then the obvious visual) are a rim that won't stay true. Andy
Yep. When I've broken a spoke on 32h wheels (it's happened a few times over the years), I usually figure it out because the rim rubs on the brake pad a bit, so I look to see what's wrong. Never had a catastrophic failure.
Koyote is offline  
Old 10-21-21, 08:02 AM
  #20  
blamester
Blamester
 
Join Date: Dec 2011
Location: Ireland
Posts: 1,041

Bikes: Peugeot teamline

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 121 Times in 100 Posts
Back off the tension and keep an eye on it.
You have caught it early so it's not a problem for now.
You can judge its development over time.
I would say you have plenty of time to figure out something.
blamester is offline  
Likes For blamester:
Old 10-21-21, 09:24 AM
  #21  
IPassGas
Full Member
Thread Starter
 
Join Date: Feb 2015
Location: Pittsburgh, PA
Posts: 397

Bikes: Schwinn, Nishiki, Santana, Trek, Rodriguez

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 187 Post(s)
Likes: 0
Liked 106 Times in 69 Posts
Originally Posted by blamester
Back off the tension and keep an eye on it. You have caught it early so it's not a problem for now. You can judge its development over time. I would say you have plenty of time to figure out something.
Thanks. Yes, figure something out. Backing off on tension seems prudent. I should have used washers, perhaps rebuilding and adding washer now would be good. I have 2mm thread on back side of nipples, so perhaps enough thread to add washers.
IPassGas is offline  
Old 10-21-21, 10:29 AM
  #22  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,620

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,559 Times in 1,574 Posts
If you're going to take the time to rebuild it, I'd probably get a fresh rim to try with the washers. (That is, if you can find one.)

I've built lots of wheels with used rims (most of unknown provenance), but I figure anything that already has a sign of cracking will set me up for disappointment sooner rather than later.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 10-21-21, 10:59 AM
  #23  
trailangel
Senior Member
 
trailangel's Avatar
 
Join Date: Feb 2014
Location: Pasadena, CA
Posts: 4,847

Bikes: Schwinn Varsity

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1931 Post(s)
Liked 741 Times in 421 Posts
^^^ Ya, explain to your stoker you are at the weight limit for that rim... 180 kilos....that the rim has cracks in it but you rebuilt it and it should hold for awhile.
I'd get a new hub... more spokes than 36....new rim, new spokes.
trailangel is offline  
Old 10-21-21, 12:35 PM
  #24  
davidad
Senior Member
 
Join Date: Feb 2009
Posts: 6,660
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 171 Times in 138 Posts
I had an Open Pro hard anodized rim that developed cracks like yours. I rode for thousands of miles and eventually replaced it with an Open Sport rim that was a little heavier and stronger. No problems.
davidad is offline  
Old 10-21-21, 01:04 PM
  #25  
IPassGas
Full Member
Thread Starter
 
Join Date: Feb 2015
Location: Pittsburgh, PA
Posts: 397

Bikes: Schwinn, Nishiki, Santana, Trek, Rodriguez

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 187 Post(s)
Likes: 0
Liked 106 Times in 69 Posts
Originally Posted by trailangel
^^^ Ya, explain to your stoker you are at the weight limit for that rim... 180 kilos....that the rim has cracks in it but you rebuilt it and it should hold for awhile.
I'd get a new hub... more spokes than 36....new rim, new spokes.
Yes, perhaps, not trying to be argumentative. The rims are rated for (each) 130kg and tension 140kgf. Our total weight (w/bike and gear) is 210kg and tension is 105kgf, both well below max rim rating. It is a symmetric wheel so all 36 spokes are bearing the burden.
IPassGas is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.