The borderline vintage thread
#26
ignominious poltroon
Join Date: Jan 2022
Posts: 4,004
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 3,412 Times
in
1,783 Posts
Is 2014 vintage enough? Mine is steel and doesn't have thru-axles.
Likes For Polaris OBark:
#27
Junior Member
Specific categories is why this forum is popular. Share your early brifter bikes to people who are interested in them as a category. That no one goes there should tell you something. Most brifter fans have or will move on to disks, and electronic shifting for their daily riders.
And that no one goes to that subforum does tell me something, it tells me it's in the wrong place. It was worth the experiment but if it's not popular enough to have a busy subforum then maybe it should be rolled back into C&V. There's a lot of cross-over with early brifter technology and the introduction and popularisation of other types of frame building and wheel/hub technologies etc which could still be considered C&V.
I'm not really sure where I'm going with this though, bikes are cool and good
#28
Death fork? Naaaah!!
I somewhat agree that having specific categories makes this place what it is, but there's specific and too specific. But we could argue our lifetimes away over what constitutes Classic and Vintage and what doesn't.
And that no one goes to that subforum does tell me something, it tells me it's in the wrong place. It was worth the experiment but if it's not popular enough to have a busy subforum then maybe it should be rolled back into C&V. There's a lot of cross-over with early brifter technology and the introduction and popularisation of other types of frame building and wheel/hub technologies etc which could still be considered C&V.
And that no one goes to that subforum does tell me something, it tells me it's in the wrong place. It was worth the experiment but if it's not popular enough to have a busy subforum then maybe it should be rolled back into C&V. There's a lot of cross-over with early brifter technology and the introduction and popularisation of other types of frame building and wheel/hub technologies etc which could still be considered C&V.
T
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
#29
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,033
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,374 Times
in
3,666 Posts
That may be a briftered 99 but its heart and soul are firmly anchored in the annals of steel frame building so regardless of how its set up today, steel is still real, classic and vintage, all day long, period, IMO.
#30
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,696
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1946 Post(s)
Liked 2,004 Times
in
1,105 Posts
I predict that with the increase in STI and ERGO riders to C&V, there will be a significant increase in responses like, "Save yourself some trouble and put in a sealed BB, and some Tektro dual pivots." And, "First thing I'd do is get rid of those plastic derailleurs." Lots of members currently tape their tubulars to their rims! We are traversing a slippery slope.
(Schools out. I've got too much time on my hands.)
(Schools out. I've got too much time on my hands.)
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#31
weapons-grade bolognium
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,344
Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 2,376 Times
in
891 Posts
1999 Steelman Stage Race - currently just a frame in a box
Likes For thinktubes:
#32
Steel is real
Thread Starter
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,105
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 375 Post(s)
Liked 1,081 Times
in
303 Posts
@styggno1 - that one looks borderline small for you (us).
And knowing the content of your collection - if you showed up on an aluminium DeRosa, well....i would be gobsmacked, too.
And knowing the content of your collection - if you showed up on an aluminium DeRosa, well....i would be gobsmacked, too.
Last edited by styggno1; 06-13-22 at 07:31 AM.
Likes For styggno1:
#34
Senior Member
Join Date: May 2016
Location: Yucatán. México
Posts: 6,191
Bikes: 79 Trek 930 is back on the road, 80 Trek 414, 84 Schwinn Letour Luxe,87 Schwinn Prelude, 92 Schwinn Paramount PDG 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3170 Post(s)
Liked 1,827 Times
in
1,153 Posts
I have a 92 Paramount, but no pics. My personal definition of vintage is if it can be worked on with the tools I have. No carbon paste or NM torque wrenches please.
#35
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,865 Times
in
1,439 Posts
@nlerner has encouraged me to dimple the chainstays and set this up 650B. I do have a set of 650B wheels I'm not using for anything else, and if I'm not careful they'll grow into another bike in the garage, but so far I've been happy with the 700x28 setup seen here.
I have to confess, the twenty year-old thin carbon fork on this makes me a bit nervous every time I think about it, but I try not to think about it when I'm riding and that usually works. Once in a while I inspect it for cracks, but I'm honestly not sure I can tell the difference between a scratch in the paint and a crack in the carbon fiber. But, you know, I've got good dental insurance. It'll probably be fine.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#36
Full Member
Join Date: Apr 2019
Location: Denver Metro, CO
Posts: 392
Bikes: 1972 Fuji The Finest | 1990 Bianchi Giro | 1999 LeMond Buenos Aires
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 303 Times
in
134 Posts
That's totally different from my 2001 Buenos Aires.
@nlerner has encouraged me to dimple the chainstays and set this up 650B. I do have a set of 650B wheels I'm not using for anything else, and if I'm not careful they'll grow into another bike in the garage, but so far I've been happy with the 700x28 setup seen here.
I have to confess, the twenty year-old thin carbon fork on this makes me a bit nervous every time I think about it, but I try not to think about it when I'm riding and that usually works. Once in a while I inspect it for cracks, but I'm honestly not sure I can tell the difference between a scratch in the paint and a crack in the carbon fiber. But, you know, I've got good dental insurance. It'll probably be fine.
@nlerner has encouraged me to dimple the chainstays and set this up 650B. I do have a set of 650B wheels I'm not using for anything else, and if I'm not careful they'll grow into another bike in the garage, but so far I've been happy with the 700x28 setup seen here.
I have to confess, the twenty year-old thin carbon fork on this makes me a bit nervous every time I think about it, but I try not to think about it when I'm riding and that usually works. Once in a while I inspect it for cracks, but I'm honestly not sure I can tell the difference between a scratch in the paint and a crack in the carbon fiber. But, you know, I've got good dental insurance. It'll probably be fine.
I’d recommend the 650B conversion but I drink the Koolaid and the chaser (my Fuji is also 650B, running Hetres). But yeah, same on the old carbon fork. I have a Fuji hi-ten high rake fork that just barely fit on my size 55 BA since I cut it shorter than I meant, whoops, if you want to give it a shot shoot me a PM and I’ll measure the steerer. Full chrome, ran it for a while and worked pretty well with nice tire clearances.
#37
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,865 Times
in
1,439 Posts
Oh goodness, I also copied your seafoam green on my SLX Bianchi. Wonder if my next bike will be one in your stable too (you don’t have a 1972 Fuji too do you?).
I’d recommend the 650B conversion but I drink the Koolaid and the chaser (my Fuji is also 650B, running Hetres). But yeah, same on the old carbon fork. I have a Fuji hi-ten high rake fork that just barely fit on my size 55 BA since I cut it shorter than I meant, whoops, if you want to give it a shot shoot me a PM and I’ll measure the steerer. Full chrome, ran it for a while and worked pretty well with nice tire clearances.
I’d recommend the 650B conversion but I drink the Koolaid and the chaser (my Fuji is also 650B, running Hetres). But yeah, same on the old carbon fork. I have a Fuji hi-ten high rake fork that just barely fit on my size 55 BA since I cut it shorter than I meant, whoops, if you want to give it a shot shoot me a PM and I’ll measure the steerer. Full chrome, ran it for a while and worked pretty well with nice tire clearances.
As for the 650B Kool Aid, I do have a 650B Motobecane Grand Jubilé with extensive Gugificazione, so I feel like converting the BA to 650B would be kind of pointless. Of course, that doesn't mean I won't do it.
__________________
My Bikes
My Bikes
Likes For Andy_K:
Likes For Roger M:
#39
Senior Member
Join Date: Mar 2008
Location: North Bend, Washington State
Posts: 2,942
Bikes: 1937 Hobbs; 1977 Bruce Gordon; 1987 Bill Holland; 1988 Schwinn Paramount (Fixed gear); 1999 Fat City Yo Eddy (MTB); 2018 Woodrup (Touring) 2016 Ritchey breakaway
Mentioned: 291 Post(s)
Tagged: 0 Thread(s)
Quoted: 554 Post(s)
Liked 3,794 Times
in
668 Posts
Early 10v Campagnolo is really nice, 10v Down Tube Shifters on two of mine. Works Great!
1987 Holland
New Shoes for the Holland
2018 Woodrup
The Young Brit
That's one of my favorites, Roger. Love that Bike!
#40
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3897 Post(s)
Liked 4,829 Times
in
2,228 Posts
1999 Pinarello. NOS frame/fork.
Did someone say they like Campy 10, early 00's??? Triple for the mountains.
Did someone say they like Campy 10, early 00's??? Triple for the mountains.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Likes For Wildwood:
#41
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3897 Post(s)
Liked 4,829 Times
in
2,228 Posts
Yes, we love Campy 10 from early 00's, on nearly vintage rides rolling nice tubular tires
And we love small builder frames, built to suit just us.
And we love small builder frames, built to suit just us.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Likes For Wildwood:
#42
Port
Join Date: Jan 2008
Location: Boston
Posts: 6,642
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 980 Post(s)
Liked 1,844 Times
in
1,054 Posts
Bikes from the late 90s early 00s are in the sweet spot: high end quality, bargain prices,
Bikes I bought for my kids. Never spent more than $200
Bikes I bought for my kids. Never spent more than $200
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass