Coaster Brake Arm Mount
#1
Team Beer
Thread Starter
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
Coaster Brake Arm Mount
I've been asked by a buddy to braze on a mount for a coaster brake for her klunker. I think is will be fairly straight forward. I'll make one out of 1" stock that I have and brass braze it on the chain stay. Anyone done this? Would like to see how you did it.
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,056
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4195 Post(s)
Liked 3,837 Times
in
2,295 Posts
I've done drum arm mounts but with vertical dropouts. I would copy the usual slotted bracket mounted under the stay. Center the bracket WRT the chain tensioned axle position. Make sure there's clearance for the reaction arm to not contact the stay and located so the arm doesn't have to be bent to contact the bracket. Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart:
#3
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,214 Times
in
1,103 Posts
Had one moved from the top of the stay to the bottom. Didn't like the quality of work but hey, its a low end tandem.
Mounted Rear Drum_S on Flickr
P1010224 on Flickr
Should take a grinder and clean it up!
Mounted Rear Drum_S on Flickr
P1010224 on Flickr
Should take a grinder and clean it up!
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Likes For SJX426:
#4
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,056
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4195 Post(s)
Liked 3,837 Times
in
2,295 Posts
I did much the same to my Burley Duet (also the first generation version). I used a fairly thick plate for the tab seeing how the forces would be trying to open up the "C". I did a bunch of other braze on changes to that bike. I hated the internal routing so ran all the cables outside, removing and plugging the OEM down tube ports. I had Burley repaint the frame and ultimately sold the bike to a blind guy who was going to tour the west coast with his sighted sister as the captain. Andy
__________________
AndrewRStewart
AndrewRStewart
#5
Team Beer
Thread Starter
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
Thanks for the photos. I ended up making a bracket out of 1/8th steel but closed on both sides. Still need to braze it on. I'll post a photo when done.
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#6
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,056
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4195 Post(s)
Liked 3,837 Times
in
2,295 Posts
Yea, for a coaster brake wheel removal needs a wrench anyway. No need for a slide in/out "C" tab.
Any one here ever seen a CB hub that had a hollow axle and a QR skewer? Andy
Any one here ever seen a CB hub that had a hollow axle and a QR skewer? Andy
__________________
AndrewRStewart
AndrewRStewart