The Water Cooler, Scuttlebutt, Chit Chat Thread
#5501
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
Regretting my electric snow blower today. I hate gas powered stuff and the maintenance and emissions and noise. But my cheap electric plug in was never meant to handle 18+ inches of heavy snow. Spent 1.5 hours and only got about a third of what I needed done.
The stuff I have left is mostly where the plow has covered, so it's like 30 inches of super thick, heavy stuff. My electric doesn't cut in very well at all with plastic blades so I'll probably have to break it up with a shovel some first
Or borrow the neighbor's real one. I'd be happy to pay to use it. My grandfather used to own one snowblower, that stayed in his garage, but all the neighbors around had chipped in, and they all shared it.
The stuff I have left is mostly where the plow has covered, so it's like 30 inches of super thick, heavy stuff. My electric doesn't cut in very well at all with plastic blades so I'll probably have to break it up with a shovel some first
Or borrow the neighbor's real one. I'd be happy to pay to use it. My grandfather used to own one snowblower, that stayed in his garage, but all the neighbors around had chipped in, and they all shared it.
Last edited by Flatballer; 02-02-21 at 07:24 PM.
#5502
Version 7.0
Join Date: Oct 2006
Location: SoCal
Posts: 13,127
Bikes: Too Many
Mentioned: 297 Post(s)
Tagged: 0 Thread(s)
Quoted: 1340 Post(s)
Liked 2,482 Times
in
1,457 Posts
My newly calibrated SRM with the new rechargeable battery indicated low battery at the start of my ride yesterday. I look for the recharging cable and initially cannot find. I proceed to systematically tear my garage apart and the last place I look found the cable. My garage and bike parts management is out of control.
#5503
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
Anyone know any good shoulder/clavicle stretches/exercises?
My clavicles bother me a lot (especially when I sleep on my side, although its gotten better with a new pillow I got). My left was a little bad, and now all this shoveling and snowblowing my left shoulder is really bad today.
My clavicles bother me a lot (especially when I sleep on my side, although its gotten better with a new pillow I got). My left was a little bad, and now all this shoveling and snowblowing my left shoulder is really bad today.
#5504
Senior Member
Join Date: Jan 2006
Location: Redlands, CA
Posts: 6,313
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 842 Post(s)
Liked 469 Times
in
250 Posts
We found hopefully the problem with the espresso machine, but I've always learned just because you found something broken doesn't mean that's the only thing. We'll know in a few days.
The fuse going from the plug cord (same as a computer) into the machine isn't responding. So the espresso guy said he'd order the part and for good measure, I ordered that part online since it was only $2. Although it was hard to find that 'exact' model, it was lke 'FSFSDF234-S' and there were a bunch of 'FSFSDF234-U' and '-V' with the same electric stats I think probably would work as its just a later model of the same thing.
ART or Graston may help if its muscle related and filled with scar tissue. Its essentially a therapist rubbing off the scars; Graston is a metal tool, ART uses the fingers. You can have someone try and do it for you (I have my wife work on my leg).
The fuse going from the plug cord (same as a computer) into the machine isn't responding. So the espresso guy said he'd order the part and for good measure, I ordered that part online since it was only $2. Although it was hard to find that 'exact' model, it was lke 'FSFSDF234-S' and there were a bunch of 'FSFSDF234-U' and '-V' with the same electric stats I think probably would work as its just a later model of the same thing.
Anyone know any good shoulder/clavicle stretches/exercises?
My clavicles bother me a lot (especially when I sleep on my side, although its gotten better with a new pillow I got). My left was a little bad, and now all this shoveling and snowblowing my left shoulder is really bad today.
My clavicles bother me a lot (especially when I sleep on my side, although its gotten better with a new pillow I got). My left was a little bad, and now all this shoveling and snowblowing my left shoulder is really bad today.
#5505
My idea of fun
Join Date: Jun 2006
Location: Gainesville, FL
Posts: 9,920
Bikes: '06 Litespeed Tuscany, '02 Kona Lavadome, '07 Giant TCR Advanced, '07 Karate Monkey
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked 59 Times
in
36 Posts
My newly calibrated SRM with the new rechargeable battery indicated low battery at the start of my ride yesterday. I look for the recharging cable and initially cannot find. I proceed to systematically tear my garage apart and the last place I look found the cable. My garage and bike parts management is out of control.
Likes For kensuf:
Likes For gsteinb:
#5509
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
Depends. Is that all by hand? If so, you're a madman. I cleared less than that and at least had a terrible electric snowblower doing some of the work.
My neighbor also lent me his gas powered to do the sidewalk, and even that struggled with the depth and the weight, couldn't get traction.
My neighbor also lent me his gas powered to do the sidewalk, and even that struggled with the depth and the weight, couldn't get traction.
#5510
out walking the earth
The plow guy plowed three or four times, but I had three hours of work today to clear the cars, paths, widen and clean things up.
#5512
out walking the earth
When you live in a place that regularly sees -15 and less and your driveway is few hundred feet long it kind of is part of the cost of living there. I don't think anyone I know that lives up here shovels their whole driveway.
#5513
Making a kilometer blurry
#5514
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
Pretty jealous of your place.
#5515
out walking the earth
I looked into getting a plow, but by the time I got done with all that I'd have to plow my driveway a lot over a long period of time. Plus I'd no doubt bang into something.
It's a good place to live. We have dreams of moving to a bigger piece of property with a view (this is just an acre, with the acre behind us also) with a couple of houses on it, and separate office spaces instead of a shared building, but I kind of doubt that'll ever happen.
It's a good place to live. We have dreams of moving to a bigger piece of property with a view (this is just an acre, with the acre behind us also) with a couple of houses on it, and separate office spaces instead of a shared building, but I kind of doubt that'll ever happen.
#5516
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
I looked into getting a plow, but by the time I got done with all that I'd have to plow my driveway a lot over a long period of time. Plus I'd no doubt bang into something.
It's a good place to live. We have dreams of moving to a bigger piece of property with a view (this is just an acre, with the acre behind us also) with a couple of houses on it, and separate office spaces instead of a shared building, but I kind of doubt that'll ever happen.
It's a good place to live. We have dreams of moving to a bigger piece of property with a view (this is just an acre, with the acre behind us also) with a couple of houses on it, and separate office spaces instead of a shared building, but I kind of doubt that'll ever happen.
We also want a rooftop platform that we can put a telescope on, and a clearing around the house with no trees. In a dark, rural area. While we're dreaming.
Likes For Flatballer:
#5517
Senior Member
Join Date: Jan 2014
Location: Southern California, USA
Posts: 10,474
Bikes: 1979 Raleigh Team 753
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3374 Post(s)
Liked 371 Times
in
253 Posts
Speaking of humans turning literally anything into a hobby (espresso?) we got my daughter a hamster for her birthday. My wife has had a bunch before. I had no idea the lengths you could go to with fancy, huge cages with tons of stuff and apparatus and extensions and tubes and accessories.
It's a whole world, and of course I'm obsessive so my wife is already upset that I want too much and too big for the hamster.
It's a whole world, and of course I'm obsessive so my wife is already upset that I want too much and too big for the hamster.
#5519
out walking the earth
From behind where this is taken there's a shared bathroom that walks through to my wife's side of the building. If I could do it again I'd insulate the walls in between for sound proofing. But when it was built her side was a wood shop / art studio and now it's finished office and craft space. This is an older photo. The jerseys have been stored, and I added a mini split in the meditation room so I can train in the heat and humidity. I set my trainer up next to the sink.
#5521
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
https://www.youtube.com/watch?v=uYXE...nnel=JeffAdams
I've long dreamed of building my own house with a heated driveway so instead of plowing, I can just turn it on and the snow or ice would just melt away.
I've long dreamed of building my own house with a heated driveway so instead of plowing, I can just turn it on and the snow or ice would just melt away.
G: 300 feet long, 11 feet wide, 3630 sq feet, 30 inches of normal snow, for 9075 cubic feet, 257 cubic meters. Say 75 kg/m3 roughly (50 is fresh light stuff, 150 is heavy packed, the lower levels of a 30 inch snowfall get compressed, we're just very rough at this point). 19275 kg (this is not going well so far, I'm scared, that's a lot of weight).
Latent heat is 334kJ/kg, so we get roughly 6500 MJ. 1800 kWh. About $180 or so if your electricity is normal/cheap, $400 if it's not. Approximately $0 if you have solar or geothermal. So back to the original, $180/257m3, is about 70 cents per cubic meter. Oh, and this is if the snow is already at 32F/0C. If it's pretty cold, and the ground under it is pretty cold (where your pipes/cables are) probably add another 25% or so. Let's call it $1 to be safe.
For your own rates, we could say maybe 2200 kWh/257m3, or very roughly say 8.5 kWh/m3. In Cali it'd cost you like $3/cubic meter. Here it's 50 cents or so.
I also didn't do his parking area, just the driveway.
My driveway would've been about 85.5m3, so $45 or so (electricity is very cheap here). Not terrible for a once in a while snowstorm. I would've paid $45 to not do all that work (I lost way more money than that taking time off work to shovel).
Last edited by Flatballer; 02-04-21 at 09:53 AM.
#5523
Killing Rabbits
Join Date: Apr 2005
Posts: 5,697
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Liked 217 Times
in
102 Posts
Yeah, they're pretty popular in some places. I was curious how much it would've cost gsteinb or myself to melt our snowfalls, so I did the math.
G: 300 feet long, 11 feet wide, 3630 sq feet, 30 inches of normal snow, for 9075 cubic feet, 257 cubic meters. Say 75 kg/m3 roughly (50 is fresh light stuff, 150 is heavy packed, the lower levels of a 30 inch snowfall get compressed, we're just very rough at this point). 19275 kg (this is not going well so far, I'm scared, that's a lot of weight).
Latent heat is 334kJ/kg, so we get roughly 6500 MJ. 1800 kWh. About $180 or so if your electricity is normal/cheap, $400 if it's not. Approximately $0 if you have solar or geothermal. So back to the original, $180/257m3, is about 70 cents per cubic meter. Oh, and this is if the snow is already at 32F/0C. If it's pretty cold, and the ground under it is pretty cold (where your pipes/cables are) probably add another 25% or so. Let's call it $1 to be safe.
For your own rates, we could say maybe 2200 kWh/257m3, or very roughly say 8.5 kWh/m3. In Cali it'd cost you like $3/cubic meter. Here it's 50 cents or so.
I also didn't do his parking area, just the driveway.
My driveway would've been about 85.5m3, so $45 or so (electricity is very cheap here). Not terrible for a once in a while snowstorm. I would've paid $45 to not do all that work (I lost way more money than that taking time off work to shovel).
G: 300 feet long, 11 feet wide, 3630 sq feet, 30 inches of normal snow, for 9075 cubic feet, 257 cubic meters. Say 75 kg/m3 roughly (50 is fresh light stuff, 150 is heavy packed, the lower levels of a 30 inch snowfall get compressed, we're just very rough at this point). 19275 kg (this is not going well so far, I'm scared, that's a lot of weight).
Latent heat is 334kJ/kg, so we get roughly 6500 MJ. 1800 kWh. About $180 or so if your electricity is normal/cheap, $400 if it's not. Approximately $0 if you have solar or geothermal. So back to the original, $180/257m3, is about 70 cents per cubic meter. Oh, and this is if the snow is already at 32F/0C. If it's pretty cold, and the ground under it is pretty cold (where your pipes/cables are) probably add another 25% or so. Let's call it $1 to be safe.
For your own rates, we could say maybe 2200 kWh/257m3, or very roughly say 8.5 kWh/m3. In Cali it'd cost you like $3/cubic meter. Here it's 50 cents or so.
I also didn't do his parking area, just the driveway.
My driveway would've been about 85.5m3, so $45 or so (electricity is very cheap here). Not terrible for a once in a while snowstorm. I would've paid $45 to not do all that work (I lost way more money than that taking time off work to shovel).
#5524
No matches
Join Date: Aug 2008
Location: Eastern PA
Posts: 11,647
Bikes: two wheeled ones
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 444 Times
in
250 Posts
So it's about 30k BTU/m3. Around 10 cents per m3 here, assuming perfect efficiency. Say 12 cents.
#5525
Senior Member
Join Date: Jan 2014
Location: Southern California, USA
Posts: 10,474
Bikes: 1979 Raleigh Team 753
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3374 Post(s)
Liked 371 Times
in
253 Posts
It depends :-)
We were visiting Wenatchee, WA a couple years ago. Everything was electric. Heaters, stoves etc. I was trying to look it up, but at the time I recall they were paying 3 cents a kWh. All hydro power.
I was please the above was from memory. Now 3.22cents. We pay around 16-20cents per kWh in both CO and CA while we lived near a nuclear power plant.
https://www.electricitylocal.com/sta...8%C2%A2%2FkWh.
I have heard it said nuclear is much cheaper (San Onofre was 4 miles from our San Clemente house) but after all the regulation, maintenance it is way higher. If you toss in the kelp reef they had to make locally, higher yet.
So they shut the plant down because they could not afford to operate/maintain it, but they still kept building that reef. Just that, without the warm water from cooling the ocean in the area is now 1-2 degrees cooler, so it is just a bunch of cement and tires and too cold for kelp and tropical fish that used to hang out around the cooling (warmer) vents. They were still building reef last year while the plant had shut down a year earlier and will just add it to the electrical bill.
We were visiting Wenatchee, WA a couple years ago. Everything was electric. Heaters, stoves etc. I was trying to look it up, but at the time I recall they were paying 3 cents a kWh. All hydro power.
I was please the above was from memory. Now 3.22cents. We pay around 16-20cents per kWh in both CO and CA while we lived near a nuclear power plant.
https://www.electricitylocal.com/sta...8%C2%A2%2FkWh.
I have heard it said nuclear is much cheaper (San Onofre was 4 miles from our San Clemente house) but after all the regulation, maintenance it is way higher. If you toss in the kelp reef they had to make locally, higher yet.
So they shut the plant down because they could not afford to operate/maintain it, but they still kept building that reef. Just that, without the warm water from cooling the ocean in the area is now 1-2 degrees cooler, so it is just a bunch of cement and tires and too cold for kelp and tropical fish that used to hang out around the cooling (warmer) vents. They were still building reef last year while the plant had shut down a year earlier and will just add it to the electrical bill.