Notices
Classic and Vintage Bicycles: Whats it Worth? Appraisals. Use this subforum for all requests as to "How much is this vintage bike worth?"Do NOT try to sell it in here, use the Marketplaces.

Trek

Old 03-05-22, 04:47 PM
  #1  
Gravel Rider
Senior Member
Thread Starter
 
Join Date: Aug 2021
Posts: 153
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 155 Times in 63 Posts
Trek

Trek O22.
This was given to me and needs a good going through. I'd appreciate some help on what I have. Thanks!!

Gravel Rider is offline  
Old 03-05-22, 05:29 PM
  #2  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18320 Post(s)
Liked 4,489 Times in 3,338 Posts


Here is a list of Trek Serial Numbers. I think that puts your bike as 1982.

I'm not sure of the model, but I presume it is a reasonably good model. Do you have a photo of the tubing decal just below the seat?

I doubt either the front or rear wheels are original.

Your chain is pretty knackered up, and is the first part to replace. Probably tires too.

What is under the seat cover? If it is anything other than hard plastic, remove that seat cover and dispose it as far away from the bike as possible!!! Even if it is hard plastic, it may be better without the seat cover.

As-is, you might get $150 to $200 for the bike.
Give it good cleaning, tuning, new chain and tires. And, it could be $300 to $400.
CliffordK is offline  
Likes For CliffordK:
Old 03-05-22, 05:50 PM
  #3  
cranky old road 
Let your bike be the tool
 
cranky old road's Avatar
 
Join Date: Jun 2006
Location: NC/SC border
Posts: 942

Bikes: '66 Raleigh Carlton, '70 Ron Cooper, '95 Bianchi CD'I, Zonal Frame with Xenon gruppo, Carbon Frame with Record Gruppo, Columbia Twosome, Terry Classic, Bianchi SX, Gravity SS/FG

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 332 Post(s)
Liked 311 Times in 191 Posts
If it's an 82 it's a good match for the 515 in this catalog
__________________
Never try to teach a pig to sing...
cranky old road is offline  
Old 03-05-22, 05:55 PM
  #4  
Gravel Rider
Senior Member
Thread Starter
 
Join Date: Aug 2021
Posts: 153
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 155 Times in 63 Posts
Thank you. It does appear to be a 1982 510 / 22" frame. I agree the wheels are not original. The seat is weathered and the foam has disintegrated. Chain is definitely toast. Needs bar wrap.
Gravel Rider is offline  
Old 03-05-22, 06:13 PM
  #5  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18320 Post(s)
Liked 4,489 Times in 3,338 Posts
Here are some notes on the Trek https://www.bikeforums.net/classic-v...ed-tubing.html
CliffordK is offline  
Old 03-05-22, 06:43 PM
  #6  
Jeff Neese
Senior Member
 
Join Date: Jul 2014
Posts: 1,486
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1080 Post(s)
Liked 681 Times in 438 Posts
That is one sweet ride and is worth whatever you can afford in order to restore it. That's a handbuilt, lugged, full DB Ishawata chromoly frame and it doesn't really get too much better than that. If it fits you, it's a keeper. You'll know why as soon as you ride it.
Jeff Neese is offline  
Old 03-05-22, 06:51 PM
  #7  
Gravel Rider
Senior Member
Thread Starter
 
Join Date: Aug 2021
Posts: 153
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 155 Times in 63 Posts
Thank you. It is amazingly light. Where is the best place to purchase cable and housing for the brakes? Also, should the bottom bracket be serviced?
Gravel Rider is offline  
Old 03-05-22, 08:51 PM
  #8  
wrk101
Thrifty Bill
 
wrk101's Avatar
 
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,570

Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more

Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 957 Times in 624 Posts
On ANY bike this old, everything with bearings should be serviced: headset, wheel hubs, bottom bracket for sure. Pedals likely. Most of your consumables can be bought on Amazon or check to see if you have a local co op. The co op in my area sells consumables at a reasonable price. Buying on line favors people buying quantities.
__________________
Please don't confuse ebay "asking" prices with "selling" prices. Many sellers never get their ask price. some are far from it. Value is determined once an item actually SELLS. Its easy enough to check SOLD prices.
wrk101 is offline  
Likes For wrk101:
Old 03-06-22, 01:21 AM
  #9  
SurferRosa
señor miembro
 
SurferRosa's Avatar
 
Join Date: Dec 2018
Location: Pac NW
Posts: 8,336

Bikes: '70s - '80s Campagnolo

Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3846 Post(s)
Liked 6,437 Times in 3,183 Posts
Originally Posted by Gravel Rider
Where is the best place to purchase cable and housing for the brakes? Also, should the bottom bracket be serviced?
This is the stuff I usually buy. (The shipping is free if you're logged in.)

https://www.ebay.com/itm/39282598568...sAAOSw0Q1hCDCm

And "yes" to a full overhaul.

Last edited by SurferRosa; 03-06-22 at 01:29 AM.
SurferRosa is offline  
Old 03-06-22, 02:09 AM
  #10  
Gravel Rider
Senior Member
Thread Starter
 
Join Date: Aug 2021
Posts: 153
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 155 Times in 63 Posts
Stuck seatpost......ugh.
Gravel Rider is offline  
Old 03-06-22, 05:34 AM
  #11  
dmark 
Senior Member
 
Join Date: Oct 2017
Location: NJ
Posts: 647

Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 203 Times in 141 Posts
Originally Posted by Gravel Rider
Stuck seatpost......ugh.
Patience.
__________________
Last new bike 1991
dmark is offline  
Old 03-06-22, 08:22 AM
  #12  
jdawginsc 
Edumacator
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,429

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2385 Post(s)
Liked 2,931 Times in 1,862 Posts
Originally Posted by Gravel Rider
Thank you. It is amazingly light. Where is the best place to purchase cable and housing for the brakes? Also, should the bottom bracket be serviced?
Just another option. Great seller (not affiliated). Full cable kit. https://www.ebay.com/itm/25423468514...kAAOSwUP1gwDGG

As far as the bottom bracket, if it is going to be more of a rider, you might consider any number of Shimano cartridge bottom brackets, BB un52, BB un300 is the newer one. Easy to install. Tsunami-proof. If you are going to refresh a decent condition bottom bracket, also great!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is offline  
Old 03-06-22, 08:28 AM
  #13  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
The full Ishiwata Treks are very fine bikes. I have a '79 Trek 510 which is one of my favorite bikes to ride. Yes overhaul the bike completely and replace all the consumables.

bikemig is offline  
Old 03-06-22, 08:36 AM
  #14  
Gravel Rider
Senior Member
Thread Starter
 
Join Date: Aug 2021
Posts: 153
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 155 Times in 63 Posts
Originally Posted by dmark
Patience.
Not my forte. Suggestions?
Gravel Rider is offline  
Old 03-06-22, 08:45 AM
  #15  
dmark 
Senior Member
 
Join Date: Oct 2017
Location: NJ
Posts: 647

Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 203 Times in 141 Posts
Penetraitng oils may help but before that I would remove the crank and bottom bracket, turn bike upside down and pour ammonia then wait a few days. I would try this before penetrating oil eg ATF/acetone or Liquid Wrench because after oil the ammonia will be diluted by oil coating.
I hope you do not need the lye or hacksaw solution since lye is dangerous to you and the hacksaw can damage the frame.
But judging by how good the frame looks the corrosion may not be too severe but that fluted seatpost slammed down is a water trap.
I would expect many suggestions to appear shortly.
Good luck.
__________________
Last new bike 1991
dmark is offline  
Likes For dmark:
Old 03-06-22, 10:56 AM
  #16  
wrk101
Thrifty Bill
 
wrk101's Avatar
 
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,570

Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more

Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 957 Times in 624 Posts
Originally Posted by Gravel Rider
Not my forte. Suggestions?
Endless threads already on freeing up stuck seat posts, probably a couple of thousand at least. Start with the easiest methods, working your way if needed to the hardest method. Every method works SOMETIMES. Hopefully yours will be on the easier end.
wrk101 is offline  
Old 03-06-22, 11:07 AM
  #17  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18320 Post(s)
Liked 4,489 Times in 3,338 Posts
Deep Flutes in the seatpost may provide a good channel for lube deep into the seattube. Just fill the flutes to the top, wait, replace, wait, etc.

Make sure the clamp is loose, and leave the seat on for twisting leverage.

However, that is also a risk factor for having rust and corrosion deep in the seattube.

Good Luck!!!
CliffordK is offline  
Likes For CliffordK:
Old 03-06-22, 02:23 PM
  #18  
SurferRosa
señor miembro
 
SurferRosa's Avatar
 
Join Date: Dec 2018
Location: Pac NW
Posts: 8,336

Bikes: '70s - '80s Campagnolo

Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3846 Post(s)
Liked 6,437 Times in 3,183 Posts
Use a shot glass full of half ATF and half acetone. And wait ... and wait ... and wait ...
SurferRosa is offline  
Likes For SurferRosa:
Old 03-07-22, 09:13 AM
  #19  
Mr. 66
Senior Member
 
Mr. 66's Avatar
 
Join Date: Aug 2015
Posts: 3,440
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1124 Post(s)
Liked 1,704 Times in 941 Posts
PB Blaster is your friend, that looks pretty clean for the post to rusted. Try some heat at the same time, you can get things hot to the touch with out damaging the paint.
Mr. 66 is offline  
Likes For Mr. 66:
Old 03-07-22, 04:45 PM
  #20  
dmark 
Senior Member
 
Join Date: Oct 2017
Location: NJ
Posts: 647

Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 203 Times in 141 Posts
Originally Posted by CliffordK
Deep Flutes in the seatpost may provide a good channel for lube deep into the seattube. Just fill the flutes to the top, wait, replace, wait, etc.

Make sure the clamp is loose, and leave the seat on for twisting leverage.

However, that is also a risk factor for having rust and corrosion deep in the seattube.

Good Luck!!!
+1
With the flutes perhaps no need to pour through bottom bracket.
__________________
Last new bike 1991
dmark is offline  
Likes For dmark:
Old 03-09-22, 08:31 AM
  #21  
OldsCOOL
Senior Member
 
OldsCOOL's Avatar
 
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317

Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times in 313 Posts
Originally Posted by dmark
+1
With the flutes perhaps no need to pour through bottom bracket.
Good suggestion. Just a thought, coming in from the flutes will enable the solution to follow the same route as the water came in. Hopefully you can hit the corrosion more effectively and also find where the corrosion is the most severe.
OldsCOOL is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.