Go Back  Bike Forums > Bike Forums > Framebuilders
Reload this Page >

How to paint

Notices
Framebuilders Thinking about a custom frame? Lugged vs Fillet Brazed. Different Frame materials? Newvex or Pacenti Lugs? why get a custom Road, Mountain, or Track Frame? Got a question about framebuilding? Lets discuss framebuilding at it's finest.

How to paint

Old 06-21-22, 10:52 AM
  #1  
PimpMan
Senior Member
Thread Starter
 
Join Date: Feb 2018
Posts: 97
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 104 Post(s)
Liked 7 Times in 5 Posts
How to paint lugs and rims with disk brake?

How i mask lugs to spray paint them like this?


How this is done?!

I tried to pain the fork its way easier pattern than that using Q-Tip and it look pretty bad, bubbly and smeared and mixed with under paint which was different color. I assume will be same if i use paint brush?

How do i mask properly to spray paint like this? I am thinking first paint that whole front section of frame white and then put tiny layer of lithium grease or pressed bread crumbs inside sections i want to protect and paint over with other color on top?



Currently my frame painted and clear applied already, but i want to sand the lugs and spray paint them white



I also want to paint rims same color as frame (currently there are no spokes installed in rims) however i have rim brakes, should i mask that area where brakes engage to the rim or paint on the sides of the rim will get removed soon after use and no need to worry about it?
If i can mask sides of the rims, how i do it evenly?

Last edited by PimpMan; 06-21-22 at 10:55 AM.
PimpMan is offline  
Old 06-21-22, 11:02 AM
  #2  
Juan Foote
LBKA (formerly punkncat)
 
Juan Foote's Avatar
 
Join Date: Jan 2010
Location: Jawja
Posts: 4,027

Bikes: Spec Roubaix SL4, GT Traffic 1.0

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1694 Post(s)
Liked 547 Times in 387 Posts
Tape and a razor blade. Mask off the items you don't want painted the first time, reverse the second time.
Juan Foote is offline  
Old 06-21-22, 06:46 PM
  #3  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 16,242

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3418 Post(s)
Liked 2,104 Times in 1,374 Posts
JF's method is a time honored classic way. Except many painters will spray the lighter color with no mask. Then mask for the darker color. Masking tape holds up better then tooth paste or some make shift masks. I have not tired the liquid masking that modelers sometimes use. It's not uncommon to have to do some focused touch up (brush on) before the final top coat of clear.

Masking takes some patience and focus to get the edge consistent. Only removing the masking is more anxiety filled This kind of skill is some of what separates the hobby painters from the pros. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Old 06-23-22, 05:18 AM
  #4  
smontanaro 
Senior Member
 
Join Date: Aug 2007
Location: Evanston, IL
Posts: 4,919

Bikes: many

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1051 Post(s)
Liked 670 Times in 384 Posts
I've no experience, but will point out that Brian Chapman seems to use both
and
, I suppose depending on the task.

Edit: The above text looks fine when I preview it, but for some reason the forum software decided to insert hard line breaks before and after my links.
__________________
Contact me to help Doug Fattic's colleagues in Ukraine


Last edited by smontanaro; 06-24-22 at 04:52 AM.
smontanaro is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.