Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Tips for riding with broken spokes

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Tips for riding with broken spokes

Old 09-20-22, 06:02 PM
  #1  
LarrySellerz
Senior Member
Thread Starter
 
Join Date: Mar 2021
Posts: 1,964
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 2644 Post(s)
Liked 474 Times in 344 Posts
Tips for riding with broken spokes

Hey guys, last month a spoke went out and the wheel instantly got a bit out of true. I took it to a few shops, but none of them were able to fix it the same day and I need the bike to get to work. I put off the repair and rode like 500 miles on it, the problem didn't seem to get worse, but this afternoon the bike was making a weird sound and I found another broken spoke. I remember when I was younger and 50 pounds lighter, I had a wheel hold up for a long time with multiple broken spokes, I eventually got it replaced when it had like 4 or 5 missing spokes.

I hope to make this wheel last atleast until the weekend, so it needs to go like 50 or 60 more miles before I can repair it.
LarrySellerz is offline  
Likes For LarrySellerz:
Old 09-20-22, 06:13 PM
  #2  
Ghazmh
Senior Member
 
Ghazmh's Avatar
 
Join Date: Jan 2014
Location: The banks of the River Charles
Posts: 2,020

Bikes: 2022 Salsa Beargrease, 2020 Seven Evergreen, 2019 Honey Allroads Ti, 2018 Seven Redsky XX, 2017 Trek Boon 7, 2014 Trek 520

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 693 Post(s)
Liked 903 Times in 486 Posts
If that’s a question for us where is the question mark?

Don’t you have another bike?
Ghazmh is offline  
Old 09-20-22, 06:14 PM
  #3  
big john
Senior Member
 
big john's Avatar
 
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,099
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8185 Post(s)
Liked 8,843 Times in 4,391 Posts
Can't you just buy a couple spokes and put them in?

If you have a broken spoke the wheel is compromised. You're taking a risk riding it. Be careful.
big john is offline  
Likes For big john:
Old 09-20-22, 07:01 PM
  #4  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
No spokes in the dumpster?

You rode 500 miles on a wheel-ful of overstressed and probably badly-tensioned spokes, and if only one more broke you are lucky. If you had bought a couple spokes (repairs and spares) and fixed the wheel, you wouldn't have two broken spokes.

As for your earlier experiences .... how many spokes? How strong a rim? How hard did you ride it? Without knowing every detail your prior experience is meaningless.

What is slightly less meaningless is that you ignored a broken spoke for so long .... and seem shocked that all the parts on the bike are important to the bike's overall function---particularly when riding shirtless at 35 mph with the fast guys .....

So .... why not go to the dumpsters and get a bunch of junk bikes and build a couple of back-up frankenbikes just to tide you over .... or just collect whichever wheel you need from junk bikes until you get a couple good ones.

When I absolutely needed a bike every day, I usually had two or three ready and a few more nearly ready .... just from pulling stuff out of junk heaps and collecting discarded bikes left out for the trash collector. Can't miss much work because the bike broke ... bosses tend not to care why you weren't there, and tend not to want to you back.

Whatever. It is hard to tell what to take seriously on BF, so my default is "nothing."
Maelochs is offline  
Likes For Maelochs:
Old 09-20-22, 08:19 PM
  #5  
LarrySellerz
Senior Member
Thread Starter
 
Join Date: Mar 2021
Posts: 1,964
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 2644 Post(s)
Liked 474 Times in 344 Posts
I really need to learn how to wrench on my own bikes better, dont know how to change a spoke. im bad at learning from youtube

edit: ok changing a spoke looks easy but I guess my worry is trueing the wheel, never had any luck doing that.

Last edited by LarrySellerz; 09-20-22 at 08:26 PM.
LarrySellerz is offline  
Likes For LarrySellerz:
Old 09-20-22, 09:17 PM
  #6  
big john
Senior Member
 
big john's Avatar
 
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,099
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8185 Post(s)
Liked 8,843 Times in 4,391 Posts
Originally Posted by LarrySellerz
I really need to learn how to wrench on my own bikes better, dont know how to change a spoke. im bad at learning from youtube

edit: ok changing a spoke looks easy but I guess my worry is trueing the wheel, never had any luck doing that.
Take the old spoke to get it matched up. A lot of shops have spoke machines to cut and rethread spokes. Put it in the wheel, you might have to take the cassette off, and tighten it with a spoke wrench, (they come on different sizes). Truing the wheel takes practice, but if it was close before the spoke popped you should be able to get it reasonable true just tightening the new spoke.
big john is offline  
Old 09-21-22, 06:30 AM
  #7  
znomit
Zoom zoom zoom zoom bonk
 
znomit's Avatar
 
Join Date: Sep 2006
Location: New Zealand
Posts: 4,623

Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 549 Post(s)
Liked 721 Times in 365 Posts
Here's a tip. Leave the bike at the shop for the day and ride the bus.
znomit is offline  
Old 09-21-22, 07:06 AM
  #8  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,535

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10901 Post(s)
Liked 7,390 Times in 4,148 Posts
Originally Posted by LarrySellerz
- adjust spokes around broken spoke to correct the wobble.
- dont ride it much.


There you go- 2 actual tips for riding with broken spokes.
Just leave the bike at a shop and ride one of your other bikes for commuting. Or swap the wheel out for a wheel from one of your other bikes until a shop can fix the spoke. <--now there are 2 better ways to actually handle your situation.
mstateglfr is offline  
Old 09-21-22, 07:30 AM
  #9  
Mojo31
-------
 
Join Date: Jul 2020
Location: Tejas
Posts: 12,629
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9525 Post(s)
Liked 6,267 Times in 3,455 Posts
Hitchhike.

Shirtless, long hair, shouldn't be a problem getting a ride.
Mojo31 is offline  
Likes For Mojo31:
Old 09-21-22, 09:33 AM
  #10  
Broctoon
Super-duper Genius
 
Broctoon's Avatar
 
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,713
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 768 Post(s)
Liked 983 Times in 508 Posts
My advice is "don't."

Slapping my forehead at what we're seeing on BF lately. You can't even make this stuff up! I read the thread title and before seeing the OP's name I'm thinking, "Larry's at it again?"

Larry, I respect the you're living car-free, even with some long-ish daily commutes. I admire your ability to get by on a minimal budget. But seriously, you need to be wise. When something breaks, either figure out how to fix it right, scrape together enough dough to pay a shop for the repair, or just don't ride. You're making yourself look like a jackass.

Last edited by Broctoon; 09-21-22 at 09:38 AM.
Broctoon is offline  
Likes For Broctoon:
Old 09-21-22, 09:42 AM
  #11  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
He's embarrassing himself, and damaging the image of the homeless folks and paupers who are car-free and biking it all over every day with some sort of competence.
Maelochs is offline  
Old 09-21-22, 09:46 AM
  #12  
Broctoon
Super-duper Genius
 
Broctoon's Avatar
 
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,713
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 768 Post(s)
Liked 983 Times in 508 Posts
Originally Posted by Maelochs
He's embarrassing himself, and damaging the image of the homeless folks and paupers who are car-free and biking it all over every day with some sort of competence.
Put another way:

Larry, when you do this sketchy, cheapskate stuff, you don't just make yourself look bad; you make all the shirtless, helmetless, pot-smoking, dumpster-diving, reckless cyclists look bad. Show some dignity, man!
Broctoon is offline  
Likes For Broctoon:
Old 09-21-22, 11:10 AM
  #13  
Carbonfiberboy 
just another gosling
 
Carbonfiberboy's Avatar
 
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,500

Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004

Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3872 Post(s)
Liked 1,920 Times in 1,369 Posts
Originally Posted by Maelochs
He's embarrassing himself, and damaging the image of the homeless folks and paupers who are car-free and biking it all over every day with some sort of competence.
Homeless people building a bike out of dumpster divings is a common sight around town. I think if you need it done, you learn how to do it. It's only human.

When you get the new spoke in, plink on the spokes around the wheel, just on the one side if it's a rear, and make the new spoke give the same sound. Then spin the wheel. Adjust 1/4 turn at a time after you get close.
__________________
Results matter
Carbonfiberboy is offline  
Old 09-21-22, 12:39 PM
  #14  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 7,765
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 6882 Post(s)
Liked 10,872 Times in 4,637 Posts
Originally Posted by Broctoon
Put another way:

Larry, you make all the shirtless, helmetless, pot-smoking, dumpster-diving, reckless cyclists look bad. Show some dignity, man!
Larry is basically this guy, but about 15 years after high school.

Koyote is offline  
Likes For Koyote:
Old 09-21-22, 01:57 PM
  #15  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
I get that these posts are entertaining for some but come on Larry...are you really that clueless?
cxwrench is offline  
Likes For cxwrench:
Old 09-21-22, 02:56 PM
  #16  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 7,765
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 6882 Post(s)
Liked 10,872 Times in 4,637 Posts
Originally Posted by cxwrench
I get that these posts are entertaining for some but come on Larry...are you really that clueless?
Koyote is offline  
Likes For Koyote:
Old 09-22-22, 12:47 AM
  #17  
znomit
Zoom zoom zoom zoom bonk
 
znomit's Avatar
 
Join Date: Sep 2006
Location: New Zealand
Posts: 4,623

Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 549 Post(s)
Liked 721 Times in 365 Posts
Originally Posted by cxwrench
I get that these posts are entertaining for some but come on Larry...are you really that clueless?
Are you new here?
znomit is offline  
Likes For znomit:
Old 09-22-22, 06:08 AM
  #18  
Kai Winters
Senior Member
 
Join Date: Oct 2008
Location: Northern NY...Brownville
Posts: 2,556

Bikes: Specialized Aethos, Specialized Diverge Comp E5

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 444 Times in 257 Posts
I'm left with two trains of thought.
The first is the guy is trolling for the comments and he wins lol.
The second is he is clueless and deserves his fate to ride the wobbly wheel forevah and evah.
Kai Winters is offline  
Likes For Kai Winters:
Old 09-22-22, 07:17 AM
  #19  
Reflector Guy
Senior Member
 
Reflector Guy's Avatar
 
Join Date: Jul 2020
Location: Chicago
Posts: 1,340

Bikes: Bianchi Infinito XE, Via Nirone 7, GT Aggressor Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 599 Post(s)
Liked 1,270 Times in 588 Posts
"I needed the bike to get to work..... So I rode it 500 miles".

Sure, that makes perfect sense!
Reflector Guy is offline  
Old 09-22-22, 07:23 AM
  #20  
oxman
Newbie
 
Join Date: Jun 2008
Location: Oakville, ON, Canada
Posts: 63
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 19 Times in 10 Posts
Originally Posted by Koyote

I have the first and last traits well in hand. This has worked decently well for me so far through life, though I just may be too stupid to conduct any meaningful introspection.
oxman is offline  
Old 10-15-22, 05:54 PM
  #21  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18319 Post(s)
Liked 4,488 Times in 3,337 Posts
I have never encountered a shop that wouldn't sell a spoke same day.

If one has some kind of fancy bladed spokes, it is quite possible a basic round spoke will still work.

Truing the wheel just takes a little practice. A truing stand helps, but it can also be done on the bike.

I've broken spokes while riding, and took the time to do some quick adjustments on the road. In one case I broke a spoke 20 miles from home on approximately a century ride. So I trued the wheel the best I could with the missing spoke. Finished my century ride, then replaced the spoke at home. Unfortunately it was a major hassle to get it trued again with all the spokes.
CliffordK is online now  
Old 10-19-22, 08:14 AM
  #22  
LarrySellerz
Senior Member
Thread Starter
 
Join Date: Mar 2021
Posts: 1,964
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 2644 Post(s)
Liked 474 Times in 344 Posts
Total bill for 2 new wheels (2 bikes had broken spokes) + labor to swap over the cassette and true things up and 3 tubes? 275$ Stuff is getting so expensive, at least they gave me a couple extra tires and tubes for free. I came to pick up my 2 bikes on another bike, and then tried to carry all 3 home at once and got accused of stealing bikes by a random person. Was honestly kind of upset at the time that he accused me, I was carrying 3 bikes/2 tubes and had made it a couple blocks from the store before taking a minute to lock up one of the bikes and ride away carrying the other. When i came back for the locked up bike this dude who had been eating outside at this overpriced mexican restaurant confronted me. At least my bikes are mostly fixed.

The bike shop (best one in town) confirmed what I already knew, once you start breaking spokes the wheel is likely needs to be replaced anyways. If youre paying someone else to do it its more economical to just replace the wheel, so you might as well ride a wheel with broken spokes to failure because its going to have to get replaced anyways.
LarrySellerz is offline  
Old 10-19-22, 08:36 AM
  #23  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
Yeah ... the people who make money from selling you wheels than fixing them will tell you to destroy your wheels.

I replace broken spokes myself. A cassette lock-ring tool isd about $12, and you can make a chain whip or just use an old chain. Spokes are a couple bucks unless you buy larger quantities. i can replace a few spokes for about $12 since I have the tools ... $25 if I didn't i assume your wheels are costing you $150-$250?

Dumpster-diving vodka math
Maelochs is offline  
Old 10-20-22, 07:27 AM
  #24  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 7,765
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 6882 Post(s)
Liked 10,872 Times in 4,637 Posts
Originally Posted by LarrySellerz
Total bill for 2 new wheels (2 bikes had broken spokes) + labor to swap over the cassette and true things up and 3 tubes? 275$ Stuff is getting so expensive, at least they gave me a couple extra tires and tubes for free.
Not sure I'm following. Did you buy two new wheels and get the other wheels trued?
Koyote is offline  
Old 10-20-22, 08:09 AM
  #25  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
If he got two wheels for $275 and had them trued (assuming there were not straight and round when the shop got them .... ) then those are some .... inexpensive wheels.
Maelochs is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.