Hubs
#1
Senior Member
Thread Starter
Hubs
For those of you who build your own wheels, which is what I would like to learn how to do, or just have a preference about what's on the or built wheels you buy, what do you guys prefer?
I have found a few here and there, and I prefer something like an origin8 or formula 36 hole hub with loose bearings. I really prefer relatively inexpensive, but durable, components, so when I say I was kind of surprised they were around $50 each, I mean that seems expensive. I had an idea they might be cheaper.
What do you guys generally like to use, and where do you get them?
I have found a few here and there, and I prefer something like an origin8 or formula 36 hole hub with loose bearings. I really prefer relatively inexpensive, but durable, components, so when I say I was kind of surprised they were around $50 each, I mean that seems expensive. I had an idea they might be cheaper.
What do you guys generally like to use, and where do you get them?
#3
Senior Member
Thread Starter
As recently as last month, I was able to buy a wheelset with origin8 36 hole track hubs laced to weinmann lp18s for $170. At $50 each for the hubs, $30 each for rims, and 72 bottom of the barrel spokes at $.9 each, that's $220. That's before labor and shipping.
I realize that wheelbuilders would rely on an economy of scale obviously, and that they don't pay retail prices for hubs or spokes, but even with steep discounts for parts it's hard to see where they're making a profit unless some of those prices are inflated. Hence, my feeling that I'm doing something wrong in my search for parts and that $50 for a basic hub might be a bit much and there might be cheaper options available.
I realize that wheelbuilders would rely on an economy of scale obviously, and that they don't pay retail prices for hubs or spokes, but even with steep discounts for parts it's hard to see where they're making a profit unless some of those prices are inflated. Hence, my feeling that I'm doing something wrong in my search for parts and that $50 for a basic hub might be a bit much and there might be cheaper options available.
Last edited by cyrano138; 11-14-21 at 07:47 PM.
#4
Guest
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,270 Times
in
1,439 Posts
I've built three or four singlespeed wheelsets with Surly hubs, and I've been very happy with the results. Any QBP retailer can get them.
Likes For Rolla:
#5
Full Member
As recently as last month, I was able to buy a wheelset with origin8 36 hole track hubs laced to weinmann lp18s for $170. At $50 each for the hubs, $30 each for rims, and 72 bottom of the barrel spokes at $.9 each, that's $220. That's before labor and shipping.
I realize that wheelbuilders would rely on an economy of scale obviously, and that they don't pay retail prices for hubs or spokes, but even with steep discounts for parts it's hard to see where they're making a profit unless some of those prices are inflated. Hence, my feeling that I'm doing something wrong in my search for parts and that $50 for a basic hub might be a bit much and there might be cheaper options available.
I realize that wheelbuilders would rely on an economy of scale obviously, and that they don't pay retail prices for hubs or spokes, but even with steep discounts for parts it's hard to see where they're making a profit unless some of those prices are inflated. Hence, my feeling that I'm doing something wrong in my search for parts and that $50 for a basic hub might be a bit much and there might be cheaper options available.
#6
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
I build my own wheels because I enjoy building wheels.
I tend to want combinations of parts that aren't available in off-the-shelf wheels, but that's secondary because I could always have custom wheels built by someone else.
And I don't save any money at it, quite the opposite!
I tend to want combinations of parts that aren't available in off-the-shelf wheels, but that's secondary because I could always have custom wheels built by someone else.
And I don't save any money at it, quite the opposite!
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 11-14-21 at 09:38 PM.
#7
Senior Member
Thread Starter
I build my own wheels because I enjoy building wheels.
I tend to want combinations of parts that aren't available in off-the-shelf wheels, but that's secondary because I could always have custom wheels built by someone else.
And I don't save any money at it, quite the opposite!
I tend to want combinations of parts that aren't available in off-the-shelf wheels, but that's secondary because I could always have custom wheels built by someone else.
And I don't save any money at it, quite the opposite!
It's okay though. I still want to learn to build wheels. It's just a little disappointing that it's not even cheaper if I already have the rims. Even if I just have to buy smokes and hubs, it's still cheaper to have them built by someone else.
I'm guessing the real savings would come if you were building very high-end wheel sets that were generally handmade and the labor costs were very high. In that case, doing the labor yourself would save you a significant amount of money. I'm guessing the labor costs are fairly low with something like a weinmann race to a formula.
#8
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
That's what I was afraid of
It's okay though. I still want to learn to build wheels. It's just a little disappointing that it's not even cheaper if I already have the rims. Even if I just have to buy smokes and hubs, it's still cheaper to have them built by someone else.
I'm guessing the real savings would come if you were building very high-end wheel sets that were generally handmade and the labor costs were very high. In that case, doing the labor yourself would save you a significant amount of money. I'm guessing the labor costs are fairly low with something like a weinmann race to a formula.
It's okay though. I still want to learn to build wheels. It's just a little disappointing that it's not even cheaper if I already have the rims. Even if I just have to buy smokes and hubs, it's still cheaper to have them built by someone else.
I'm guessing the real savings would come if you were building very high-end wheel sets that were generally handmade and the labor costs were very high. In that case, doing the labor yourself would save you a significant amount of money. I'm guessing the labor costs are fairly low with something like a weinmann race to a formula.
Likes For ThermionicScott:
#9
Senior Member
Thread Starter
All my bike mechanic-ing so far has been an expense. I just like learning about how to do it. Once in awhile I get a nice upgrade to one of my bikes out of it.
Likes For cyrano138:
#10
Super-duper Genius
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,713
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 768 Post(s)
Liked 984 Times
in
508 Posts
Same.
Same...
... and SAME.
I am just like ThermScott.
If you're trying to save money by building your own wheels, you will probably lose every time. But you can definitely win if you want to have fun, learn a lot, and end up with wheels that give you a sense of pleasure. You can build wheels that are overall higher quality than those you'd buy complete, even as an amateur builder... provided you take your time and pay close attention to details.
I have no valid answer to the question, "What [components] do you generally like to use?" because each of the four or five wheels I've built was unique. I've bought parts from Modern Bike, Retrogression, Harris Cyclery, and maybe some others.
I have a set of track wheels (not built by me) with Phil Wood hubs, and I love those hubs. They appeal to me so much, I've seriously considered buying another set that recently came up in a local online classified ad. I don't need any more fixed gear wheels; I already have more than I can use. This "new old stock" set is still quite expensive, even at ~30% less than retail. But they're beautiful, and I could make them into an outstanding wheel set! Must resist urge! Shiny things grabbing my attention!! Resolve weakening... Broctoon getting sucked in... ahhhhgh!!!
... and SAME.
I am just like ThermScott.
If you're trying to save money by building your own wheels, you will probably lose every time. But you can definitely win if you want to have fun, learn a lot, and end up with wheels that give you a sense of pleasure. You can build wheels that are overall higher quality than those you'd buy complete, even as an amateur builder... provided you take your time and pay close attention to details.
I have no valid answer to the question, "What [components] do you generally like to use?" because each of the four or five wheels I've built was unique. I've bought parts from Modern Bike, Retrogression, Harris Cyclery, and maybe some others.
I have a set of track wheels (not built by me) with Phil Wood hubs, and I love those hubs. They appeal to me so much, I've seriously considered buying another set that recently came up in a local online classified ad. I don't need any more fixed gear wheels; I already have more than I can use. This "new old stock" set is still quite expensive, even at ~30% less than retail. But they're beautiful, and I could make them into an outstanding wheel set! Must resist urge! Shiny things grabbing my attention!! Resolve weakening... Broctoon getting sucked in... ahhhhgh!!!
Likes For Broctoon:
#11
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,506
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4349 Post(s)
Liked 3,986 Times
in
2,661 Posts
I am all for handbuilt wheels, I have many sets of them at least 6 at this point (though soon to be 7 as one is being rebuilt now and the front wheel was just built up for me) I have built one wheel so far and want to eventually do more but I am honestly quite happy to farm out the work to an experienced wheel builder who has done it a lot. It don't bother me one bit because typically if I do have a problem which so far I haven't in any handbuilt stuff I can go back to the builder and have them take a look at them.
I don't tend to like most of what exists partially because I am particular about parts and another part because I am a bigger person and weak wimpy wheels just don't hold up well.
I don't tend to like most of what exists partially because I am particular about parts and another part because I am a bigger person and weak wimpy wheels just don't hold up well.
#12
Newbie
I’ve built my own wheels sets for all my track framed bikes because I enjoy it and want something out of the norm. It’s not saved me money, but the originality and sense of achievement outweighs cost.
Hubs I’ve built with include Miche, Mack, Harmony and cheap BLB hubs for my winter bike that run beautifully.
My advice to anyone is give it a go.
Hubs I’ve built with include Miche, Mack, Harmony and cheap BLB hubs for my winter bike that run beautifully.
My advice to anyone is give it a go.
#13
Senior Member
Thread Starter
I guess it's probably useful to say why I want to build my own wheels and why I asked about it on the first place. There are three reasons:
1. I enjoy learning about bikes and prefer to build as much as I can from scratch.
2. I want a few more options for my own wheels. Sometimes it can be pretty tough to find exactly what you want, as others have mentioned. For example, I prefer wheels with fixed threads on both sides which, without looking at very expensive, hand built, boutique wheels can be hard to find or prohibitively expensive, especially if you're not looking for top of the line stuff.
So I'd like to be able to find the hub I like and lace it to the weinmann lp18s I also really like, with regular, straight gauge, 2mm spokes.
3. I really don't want to be a bike flipper. But. I like buying and working on older steel road bikes (and to a lesser extent older mtbs), and it's nice to have a reason to do it, even if I never actually make my money back.
Folks in my area don't care much about older steel road bikes, which are amazing in their own ways, but unless you're buying rare or relatively expensive ones, they're pretty heavy.
They do make really nice fixed conversions, though, and I think there is some interest in those, so, at least I can occasionally sell one or donate it and make someone happy and/or lose slightly less money on the whole thing.
My thought was to take older steel bikes that had alloy wheels and lace track hubs to them (instead of buying a new wheelset which makes it necessary to ask too high a price for the bike).
I wouldn't really have been too too surprised to find out that buying a wheel is more expensive than building it from the start, but I was definitely surprised to find out that lacing a new hub and spokes to an existing rim was still more expensive than just buying a new wheel.
So anyway, sorry for the long ramble. Just figured I'd explain the point of the initial post. I'm still going to start building wheels, but I guess I'll just have to do it because it's fun.
1. I enjoy learning about bikes and prefer to build as much as I can from scratch.
2. I want a few more options for my own wheels. Sometimes it can be pretty tough to find exactly what you want, as others have mentioned. For example, I prefer wheels with fixed threads on both sides which, without looking at very expensive, hand built, boutique wheels can be hard to find or prohibitively expensive, especially if you're not looking for top of the line stuff.
So I'd like to be able to find the hub I like and lace it to the weinmann lp18s I also really like, with regular, straight gauge, 2mm spokes.
3. I really don't want to be a bike flipper. But. I like buying and working on older steel road bikes (and to a lesser extent older mtbs), and it's nice to have a reason to do it, even if I never actually make my money back.
Folks in my area don't care much about older steel road bikes, which are amazing in their own ways, but unless you're buying rare or relatively expensive ones, they're pretty heavy.
They do make really nice fixed conversions, though, and I think there is some interest in those, so, at least I can occasionally sell one or donate it and make someone happy and/or lose slightly less money on the whole thing.
My thought was to take older steel bikes that had alloy wheels and lace track hubs to them (instead of buying a new wheelset which makes it necessary to ask too high a price for the bike).
I wouldn't really have been too too surprised to find out that buying a wheel is more expensive than building it from the start, but I was definitely surprised to find out that lacing a new hub and spokes to an existing rim was still more expensive than just buying a new wheel.
So anyway, sorry for the long ramble. Just figured I'd explain the point of the initial post. I'm still going to start building wheels, but I guess I'll just have to do it because it's fun.
Last edited by cyrano138; 11-18-21 at 08:14 AM.
#14
Super-duper Genius
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,713
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 768 Post(s)
Liked 984 Times
in
508 Posts
I've done the same thing you're into a time or two.
Several years ago I bought a late 70s or early 80s Japanese road bike. Takara brand, made of high-ten steel. I immediately scrapped most of the components and converted it to a fixed gear. I specifically chose this one because it has semi-horizontal dropouts, the frame was in decent condition, and it was offered for a mere $25.
After riding it with FG for a while, I decided I wanted a single speed, so I reconfigured it again. Then I decided I wanted a 3-speeed IGH, so I changed it once more. I've left it alone for the past few years and just might end up keeping it forever.
The wheels on it now--both built by me--look good and work really well. The wheel components were not terribly expensive, although I did spend more on them than the entire bike would sell for now. That's okay, since I didn't build it to flip, but to ride. It weighs as much as a tank, and that's okay too, because I have other bikes for when I want to go fast. This one is is like Forrest Gump: kind of slow, but very nice.
Several years ago I bought a late 70s or early 80s Japanese road bike. Takara brand, made of high-ten steel. I immediately scrapped most of the components and converted it to a fixed gear. I specifically chose this one because it has semi-horizontal dropouts, the frame was in decent condition, and it was offered for a mere $25.
After riding it with FG for a while, I decided I wanted a single speed, so I reconfigured it again. Then I decided I wanted a 3-speeed IGH, so I changed it once more. I've left it alone for the past few years and just might end up keeping it forever.
The wheels on it now--both built by me--look good and work really well. The wheel components were not terribly expensive, although I did spend more on them than the entire bike would sell for now. That's okay, since I didn't build it to flip, but to ride. It weighs as much as a tank, and that's okay too, because I have other bikes for when I want to go fast. This one is is like Forrest Gump: kind of slow, but very nice.
#15
It's the little things
Join Date: Jan 2016
Location: Chicagoland
Posts: 781
Bikes: Too many, yet not enough
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 279 Post(s)
Liked 326 Times
in
147 Posts
Milwaukee bicycle co hubs
Ben's cycles in Milwaukee has the "good ol days" wheelset. Weighs in an honest 1850ish with track nuts. Excellent hubs (very, very nice), hand built and tensioned wheelset for $200 shipped. No tax, straight $200 to your door.
Their hubs, which I have on two bikes are a great value. Smooth AF, pretty light, and good quality. They go for about $91 a pair, which I think is fair. I believe them to be house specced novatec hubs.
Unless going for period correct for vintage, or super high end, I don't see the value in building wheels unless doing it for experience alone. Even then, with cost of good lately, it'd be hard for me to justify with the amount of bikes in my herd currently.
Good luck.
Their hubs, which I have on two bikes are a great value. Smooth AF, pretty light, and good quality. They go for about $91 a pair, which I think is fair. I believe them to be house specced novatec hubs.
Unless going for period correct for vintage, or super high end, I don't see the value in building wheels unless doing it for experience alone. Even then, with cost of good lately, it'd be hard for me to justify with the amount of bikes in my herd currently.
Good luck.
#16
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
I guess it's probably useful to say why I want to build my own wheels and why I asked about it on the first place. There are three reasons:
3. I really don't want to be a bike flipper. But. I like buying and working on older steel road bikes (and to a lesser extent older mtbs), and it's nice to have a reason to do it, even if I never actually make my money back.
Folks in my area don't care much about older steel road bikes, which are amazing in their own ways, but unless you're buying rare or relatively expensive ones, they're pretty heavy.
They do make really nice fixed conversions, though, and I think there is some interest in those, so, at least I can occasionally sell one or donate it and make someone happy and/or lose slightly less money on the whole thing.
My thought was to take older steel bikes that had alloy wheels and lace track hubs to them (instead of buying a new wheelset which makes it necessary to ask too high a price for the bike).
I wouldn't really have been too too surprised to find out that buying a wheel is more expensive than building it from the start, but I was definitely surprised to find out that lacing a new hub and spokes to an existing rim was still more expensive than just buying a new wheel.
So anyway, sorry for the long ramble. Just figured I'd explain the point of the initial post. I'm still going to start building wheels, but I guess I'll just have to do it because it's fun.
3. I really don't want to be a bike flipper. But. I like buying and working on older steel road bikes (and to a lesser extent older mtbs), and it's nice to have a reason to do it, even if I never actually make my money back.
Folks in my area don't care much about older steel road bikes, which are amazing in their own ways, but unless you're buying rare or relatively expensive ones, they're pretty heavy.
They do make really nice fixed conversions, though, and I think there is some interest in those, so, at least I can occasionally sell one or donate it and make someone happy and/or lose slightly less money on the whole thing.
My thought was to take older steel bikes that had alloy wheels and lace track hubs to them (instead of buying a new wheelset which makes it necessary to ask too high a price for the bike).
I wouldn't really have been too too surprised to find out that buying a wheel is more expensive than building it from the start, but I was definitely surprised to find out that lacing a new hub and spokes to an existing rim was still more expensive than just buying a new wheel.
So anyway, sorry for the long ramble. Just figured I'd explain the point of the initial post. I'm still going to start building wheels, but I guess I'll just have to do it because it's fun.
The best way to do this with old 10-speeds is to re-dish the rear wheel and throw a single-speed freewheel on it. No new parts (except for the FW), just loosen one side of the wheel and tighten the other.
#17
Senior Member
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,173
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 638 Times
in
395 Posts
My new wheels have Paul hubs and they're the first "high end" aka expensive single speed hubs I've had. They really are much better than cheaper hubs but of course it's a matter of opinion if they're worth that much more money.
The bolts are 6mm as opposed to 5mm on my Wabi's so I have less of a chance of the allen tool slipping out and rounding the bolt out. And you can disassemble/adjust them much quicker. Just remove an axle nut and loosen the adjuster ring with an allen wrench. Even the lock ring for the cog is higher quality.
The bolts are 6mm as opposed to 5mm on my Wabi's so I have less of a chance of the allen tool slipping out and rounding the bolt out. And you can disassemble/adjust them much quicker. Just remove an axle nut and loosen the adjuster ring with an allen wrench. Even the lock ring for the cog is higher quality.
#18
Newbie
The Harmony hubs I built into H Plus Sons rims for my Nagasawa. The Mack hubs are in Araya rims on my Panasonic, and the Miche hubs are in vintage Araya rims on my Stratos.
#19
Senior Member
Join Date: Sep 2017
Posts: 7,877
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6963 Post(s)
Liked 10,961 Times
in
4,687 Posts
Likes For Koyote:
#20
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
I've helped a few buddies who were into it over the years, and boy is that a rabbit hole! If good beer were still hard to get in my state, I'd consider it.
Likes For ThermionicScott: