Gorilla glue for inner tube punctures?
#1
Newbie
Thread Starter
Gorilla glue for inner tube punctures?
complete noob to bike repair here...I've been looking online regarding glues for inner tube punctures (with patches) - I've only got Gorilla Glue at home currently, and it seems the concensus is to get rubber cement. I'm still curious as to just how effective Gorilla Glue would be.
also, how true is the stuff bike shops say about patching inner tubes being a short-term?
also, how true is the stuff bike shops say about patching inner tubes being a short-term?
#2
Really Old Senior Member
Get a REMA repair kit.
Don't screw around with less.
https://www.rematiptop.com/products/...pair-kits.html
Don't screw around with less.
https://www.rematiptop.com/products/...pair-kits.html
Likes For Bill Kapaun:
#3
Newbie
No, get good stuff.
A friend of mine used a poundshop puncture repair kit and had the glue melt right off the tube due to the heat generated from braking on a fast and long descent.
Personally, I prefer a brand new tube every time.
A friend of mine used a poundshop puncture repair kit and had the glue melt right off the tube due to the heat generated from braking on a fast and long descent.
Personally, I prefer a brand new tube every time.
Likes For Tawraste666:
#4
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,109
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,022 Times
in
665 Posts
+1 on Rema Tip top kits. The patch, if done correctly, will last decades. I also like that the patch is thin and tapered at the edges but the most important thing is that it works. Bike shops always provide a new tube. This is just how they work. They get money for the tube and the labor.
Likes For Velo Mule:
#5
Senior Member
Join Date: Jun 2005
Location: Kentucky
Posts: 2,599
Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Liked 699 Times
in
436 Posts
Rema, as prev stated. When there is a tried and true product, why would you use something else? If no LBS nearby, a local auto store probably has them. I've never considered a well done patch job as temporary.
#6
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,902
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4802 Post(s)
Liked 3,923 Times
in
2,552 Posts
Another Rema fan. Good thing is there are plenty of other kits that use the same glue and patch system that work but Remas are consistently the best so I I have a choice I always go there. (Good patch kits use vulcanizing glue, not a cement. Fundamentally different system.)
Likes For 79pmooney:
#7
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Likes For ThermionicScott:
#8
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
You do not want glue, you want "vulcanizing fluid" which, when correctly used, causes a chemical bond between the tube and the patch. Sulfur something something, one of the organic chemists in the group might chime in.
Ther previously-mentioned REMA kits have the right stuff.
Ther previously-mentioned REMA kits have the right stuff.
Likes For dsbrantjr:
#9
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,113
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 853 Post(s)
Liked 1,434 Times
in
816 Posts
I have had patched tubes that lasted thousands of miles. Rema, IME, is the best. Also, I sometimes use glue less patches, again IME, they work well and I have had some last long term, some not. With all tube patching, it has to be done properly to work properly.
Likes For delbiker1:
#10
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
also, how true is the stuff bike shops say about patching inner tubes being a short-term?
Last edited by Camilo; 06-22-22 at 04:26 PM.
#11
Newbie
Thread Starter
Thanks all, will order some REMA as suggested!
also, I've heard of some anecdotes regarding a patched tube losing integrity over time when left unused - I'm assuming this also holds no water?
I was just thinking of Gorilla Glue since I was a little desperate for a fix at the time and that was the only thing I had lying around - it's good to hear the patch will last long-term, though
also, I've heard of some anecdotes regarding a patched tube losing integrity over time when left unused - I'm assuming this also holds no water?
I was just thinking of Gorilla Glue since I was a little desperate for a fix at the time and that was the only thing I had lying around - it's good to hear the patch will last long-term, though
#12
Senior Member
If you're using TPU tubes, you'll probably need a special patch kit.
Latex tubes are very easy. Patches for butyl tubes work very well with latex. Or, you can use a piece cut from an old latex tube as a patch, just apply the vulcanizing fluid to both the tube and the patch.
also, how true is the stuff bike shops say about patching inner tubes being a short-term?
#13
Senior Member
I rotated through 3 tubes for my commuter bike over 12 years. Each of them have about a dozen patches. The only thing that eventually killed one was the valve broke.
#14
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,821 Times
in
1,540 Posts
++++1 on Rema kits. Take your time, use the sand paper well, put the glue on AND LET IT DRY put patch on....ride
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#15
Senior Member
Join Date: Mar 2019
Posts: 1,606
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 581 Post(s)
Liked 921 Times
in
518 Posts
A properly patched tube (with a separate patch and glue/vulcanizing fluid like Rema Tiptop) is not a temporary repair. The only time I have had a flat at a properly applied patch was when I was not able to find and remove the object stuck in the tire that caused the initial flat, and it eventually poked a hole through the patch.
The one-step peel-and-stick 'glueless' patches, in my experience, are a temporary fix at best, although others have had better luck than I.
There are a few kludges that can replicate the less-than-100%-reliable glueless patches (Gorilla tape, and the stretchy plastic tape we call 'hockey tape' might work), but nothing that works nearly as well as Rema vulcanizing fluid and the patches made to bond to it.
The one-step peel-and-stick 'glueless' patches, in my experience, are a temporary fix at best, although others have had better luck than I.
There are a few kludges that can replicate the less-than-100%-reliable glueless patches (Gorilla tape, and the stretchy plastic tape we call 'hockey tape' might work), but nothing that works nearly as well as Rema vulcanizing fluid and the patches made to bond to it.
#16
Full Member
Join Date: Jun 2022
Location: San Diego, California USA
Posts: 353
Bikes: 1974 Masi GC, 1982 Trek 728 (aka 720), 1992 Trek Multitrack 750
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 122 Post(s)
Liked 221 Times
in
140 Posts
If you have been around long enough you know once you open the little Rema Tip Top glue tube it will be dry the next time you use it. So my SOP is to carry a couple of inner tubes and just replace as needed.
Walmart sells an 8 oz can of SLIME brand Rubber Cement "for use with patches and plugs" that I have used. NAPA Auto Parts also sells some kind of vulcanizing fluid that I have used.
So when I'm home and at my leisure I patch my tubes with the Tip Top patches (the best IMO) and save opening the Tip Top glue (vulcanizing fluid) until I have an emergency on the road.
Walmart sells an 8 oz can of SLIME brand Rubber Cement "for use with patches and plugs" that I have used. NAPA Auto Parts also sells some kind of vulcanizing fluid that I have used.
So when I'm home and at my leisure I patch my tubes with the Tip Top patches (the best IMO) and save opening the Tip Top glue (vulcanizing fluid) until I have an emergency on the road.
#17
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,371
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,952 Times
in
1,677 Posts
If you have been around long enough you know once you open the little Rema Tip Top glue tube it will be dry the next time you use it. So my SOP is to carry a couple of inner tubes and just replace as needed.
Walmart sells an 8 oz can of SLIME brand Rubber Cement "for use with patches and plugs" that I have used. NAPA Auto Parts also sells some kind of vulcanizing fluid that I have used.
So when I'm home and at my leisure I patch my tubes with the Tip Top patches (the best IMO) and save opening the Tip Top glue (vulcanizing fluid) until I have an emergency on the road.
Walmart sells an 8 oz can of SLIME brand Rubber Cement "for use with patches and plugs" that I have used. NAPA Auto Parts also sells some kind of vulcanizing fluid that I have used.
So when I'm home and at my leisure I patch my tubes with the Tip Top patches (the best IMO) and save opening the Tip Top glue (vulcanizing fluid) until I have an emergency on the road.
Likes For Trakhak:
#18
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,668
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 836 Post(s)
Liked 1,061 Times
in
745 Posts
EDIT: I forgot to mention that, I believe it was cyccommute, pointed out some time ago that it's not the air that gets in but the solvent that evaporates through a poor seal at the cap so basically using the same solution is to keep an airtight seal and a little fluid at the cap helps to do this.
Last edited by Crankycrank; 06-28-22 at 08:37 AM.
#19
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,634
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4733 Post(s)
Liked 1,531 Times
in
1,002 Posts
Here's an oldie but a goodie classic take on the question
https://www.bikeforums.net/road-cycl...er-cement.html
https://www.bikeforums.net/road-cycl...er-cement.html
#20
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,691
Bikes: Too many bikes, too little time to ride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 430 Post(s)
Liked 460 Times
in
318 Posts
I've done the Gorilla Glue thing as an experiment (to fortify a peeling edge of a regular patch job) and while it seems to hold up it should not be the primary recommendation. It takes forever to cure properly and when it does it expands and hardens. Best to go with the popular opinion already mentioned in this thread.
#21
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
If you have been around long enough you know once you open the little Rema Tip Top glue tube it will be dry the next time you use it. So my SOP is to carry a couple of inner tubes and just replace as needed.
Walmart sells an 8 oz can of SLIME brand Rubber Cement "for use with patches and plugs" that I have used. NAPA Auto Parts also sells some kind of vulcanizing fluid that I have used.
So when I'm home and at my leisure I patch my tubes with the Tip Top patches (the best IMO) and save opening the Tip Top glue (vulcanizing fluid) until I have an emergency on the road.
Walmart sells an 8 oz can of SLIME brand Rubber Cement "for use with patches and plugs" that I have used. NAPA Auto Parts also sells some kind of vulcanizing fluid that I have used.
So when I'm home and at my leisure I patch my tubes with the Tip Top patches (the best IMO) and save opening the Tip Top glue (vulcanizing fluid) until I have an emergency on the road.
Likes For BrenZan:
#23
Senior Member
complete noob to bike repair here...I've been looking online regarding glues for inner tube punctures (with patches) - I've only got Gorilla Glue at home currently, and it seems the concensus is to get rubber cement. I'm still curious as to just how effective Gorilla Glue would be.
also, how true is the stuff bike shops say about patching inner tubes being a short-term?
also, how true is the stuff bike shops say about patching inner tubes being a short-term?
#24
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,686
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1125 Post(s)
Liked 253 Times
in
204 Posts
Gorilla glue won't hold up because it won't stretch as the tube expands with air. You would be better off for about 12 hours using the black Gorilla tape!
Rema is the best in the USA, as others have stated. I've used Rema for years till I switched to glueless patches about 30 years ago and was using nothing but Park glueless patches, the other brands of glueless patches sucked, the Parks would last till the tube dry rotted! But then about 3 years ago I started having problems with the Glueless patches holding up, they would only last maybe 48 hours. I thought I got a bad box, so I tried another box, same thing, I then e-mailed Park and asked them what was up, they said the tube manufacturers changed the composition of the tubes which in turn made glueless patches a fail. That was sad, because I loved glueless patches.
Rema is the best in the USA, as others have stated. I've used Rema for years till I switched to glueless patches about 30 years ago and was using nothing but Park glueless patches, the other brands of glueless patches sucked, the Parks would last till the tube dry rotted! But then about 3 years ago I started having problems with the Glueless patches holding up, they would only last maybe 48 hours. I thought I got a bad box, so I tried another box, same thing, I then e-mailed Park and asked them what was up, they said the tube manufacturers changed the composition of the tubes which in turn made glueless patches a fail. That was sad, because I loved glueless patches.
Likes For rekmeyata:
#25
Senior Member
Join Date: Mar 2019
Posts: 1,606
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 581 Post(s)
Liked 921 Times
in
518 Posts
rekmeyata Never tried it on a tube, but I was told that Gorilla tape can be used as a rim tape for tubes AND tubeless setups on fat bikes. It works on my fat bike with tubes, haven't tried tubeless yet.