WTT: CPSC NR Front Derailleur..
05-14-21, 11:01 PM
#1
If I own it, I ride it
Thread Starter
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,579
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Likes: 0
Liked 662 Times
in
311 Posts
WTT: CPSC NR Front Derailleur..
Trade complete. Thanks
Last edited by CV-6; 06-02-21 at 01:20 PM.
05-26-21, 01:44 PM
#2
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,936
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1297 Post(s)
Liked 1,885 Times
in
1,132 Posts
Lynn,
I have this one. But it has problems with the aluminum arm that the cable clamp fits in. It is loose and won't secure a cable. There are two fixes new arm or tap new threads into the existing arm let me know, Dave
Third picture is of the brass rivet to secure a new arm and the fourth is the front side of the rivet . Fifth picture is of an oversize thread bolt in a re-tapped arm.
I have this one. But it has problems with the aluminum arm that the cable clamp fits in. It is loose and won't secure a cable. There are two fixes new arm or tap new threads into the existing arm let me know, Dave
Third picture is of the brass rivet to secure a new arm and the fourth is the front side of the rivet . Fifth picture is of an oversize thread bolt in a re-tapped arm.
