What is the Modern Day Equal to the Mid-Late 80s Trek 400
#1
Junior Member
Thread Starter
What is the Modern Day Equal to the Mid-Late 80s Trek 400
Hi everyone,
I got into the biking hobby a few years back, and fell in love with the looks of old USA made bikes. I'm a very mechanically inclined person as I work on my cars, so I found a few local old bikes that needed work and fixed them up. Once I'm done I usually ride them, trade them in, or give them away to family and friends.
One of the bikes was a Trek 400, I was unsure of the year, but I added a photo of it when I finished restoring it. I gave this bike to my dad for fathers day as he used to ride an old bike of similar look when I was kid. He loved the bike and rode pretty much any day the weather was permitting. Unfortunately this past week the bike was destroyed due to an accident. He went to Treks website to look for a new 400 and couldn't find one. So I did some digging myself and also was stumped. Does anyone know what the modern day equal to a Trek 400 is?
(nvm, can't upload photo till 10 posts :/ )
I got into the biking hobby a few years back, and fell in love with the looks of old USA made bikes. I'm a very mechanically inclined person as I work on my cars, so I found a few local old bikes that needed work and fixed them up. Once I'm done I usually ride them, trade them in, or give them away to family and friends.
One of the bikes was a Trek 400, I was unsure of the year, but I added a photo of it when I finished restoring it. I gave this bike to my dad for fathers day as he used to ride an old bike of similar look when I was kid. He loved the bike and rode pretty much any day the weather was permitting. Unfortunately this past week the bike was destroyed due to an accident. He went to Treks website to look for a new 400 and couldn't find one. So I did some digging myself and also was stumped. Does anyone know what the modern day equal to a Trek 400 is?
(nvm, can't upload photo till 10 posts :/ )
Last edited by CleanClassics; 06-18-21 at 11:26 PM.
#2
Full Member
Join Date: Aug 2017
Location: San Mateo, CA
Posts: 253
Bikes: Bike Friday PRP, Bike Friday NWT, Bromton M6R, 1991 Miyata 914, 1991 Miyata 1000, 1986 Raleigh Portage, many more frames
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 347 Times
in
182 Posts
Why don't you just buy a used bike instead of a modern equivalent?
#3
Unsafe at Any Speed
Join Date: Jul 2013
Posts: 86
Bikes: Bikes: 2015 Volagi Viaje XL, 85 Specialized Rockhopper w/drops, 81 Miyata 912, gone but not forgotten late 60s Coast To Coast Sting-Ray(J38 knockoff), Schwinn Typhoon, 75 Sekine GS, 81 Trek 412, 85 Trek 720 Touring.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Liked 11 Times
in
7 Posts
Sorry for the loss of the Trek 400.
My guess would be an aluminum Domane the AL 2 is where they start. at about $1000 US.
Let the Forum What part of the world are you in and what size would you be looking for and I bet you would get lots of classic/vintage suggestions.
My guess would be an aluminum Domane the AL 2 is where they start. at about $1000 US.
Let the Forum What part of the world are you in and what size would you be looking for and I bet you would get lots of classic/vintage suggestions.
#4
Junior Member
Thread Starter
That's not out of the equation, but I don't know what the lineage is to find an equal bike.
In the car world an example would be Chevy made an S10 from the late 80s to the 2000s, but it was replaced afterwards with the Chevy Colorado and so if I was looking for a vehicle like an S10 after 2003 I would shop the Colorado.
If I could get pointers on what the lineage evolved to (I think the 400 stopped in late 80s / early 90s), I could figure out what used (or new) bikes to get.
In the car world an example would be Chevy made an S10 from the late 80s to the 2000s, but it was replaced afterwards with the Chevy Colorado and so if I was looking for a vehicle like an S10 after 2003 I would shop the Colorado.
If I could get pointers on what the lineage evolved to (I think the 400 stopped in late 80s / early 90s), I could figure out what used (or new) bikes to get.
#5
Full Member
Join Date: Aug 2017
Location: San Mateo, CA
Posts: 253
Bikes: Bike Friday PRP, Bike Friday NWT, Bromton M6R, 1991 Miyata 914, 1991 Miyata 1000, 1986 Raleigh Portage, many more frames
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 347 Times
in
182 Posts
Ah, I see. Like KAH said, it would be helpful to know your location and size. An equal bike that Trek later manufactured might be an Elance, so keep an eye out for those. I'm sure other forum members here could chip in with suggestions.
#6
Junior Member
Thread Starter
I'm in the USA, and the size of the bike can be in the medium or large range. He's rode my medium hybrid, and large hybrid with no problems. I figure if we went new we can get him fitted at the store. When I went to get my mountain bike I tried 2 sizes and was able to find the one for me.
#7
Full Member
That's not out of the equation, but I don't know what the lineage is to find an equal bike.
In the car world an example would be Chevy made an S10 from the late 80s to the 2000s, but it was replaced afterwards with the Chevy Colorado and so if I was looking for a vehicle like an S10 after 2003 I would shop the Colorado.
If I could get pointers on what the lineage evolved to (I think the 400 stopped in late 80s / early 90s), I could figure out what used (or new) bikes to get.
In the car world an example would be Chevy made an S10 from the late 80s to the 2000s, but it was replaced afterwards with the Chevy Colorado and so if I was looking for a vehicle like an S10 after 2003 I would shop the Colorado.
If I could get pointers on what the lineage evolved to (I think the 400 stopped in late 80s / early 90s), I could figure out what used (or new) bikes to get.
In short, Trek doesn't make a steel road frame like that Trek 400 anymore. They started phasing out steel road frames a while ago. They do still make a steel touring bike, but that's really not going to be anything like the 400 your dad liked. That would be a Trek 520, which is a good bike, just not exactly the same.
Like other posters mentioned, I will also suggest you look for another old Trek road bike (or just another brand vintage road bike in general), they aren't super expensive, they are easily available (I could look at my local craigslist right now and find 3-4 that are great picks) and they will be much closer to that Trek 400 than something new. That being said, if your dad is looking for a new new bike, then he should probably just go to a local bike shop and test ride some. Window shopping is fun and all but he won't really be able to know what he likes by just looking online. He also may find that a more upright, commuter type bike actually better suited for what he likes to ride.
You also should remember, we are the Classic and Vintage forum, so we do know a lot about bikes, but we really like the older stuff for various reasons and aren't all that likely to say that the new bikes these days are all that comparable to the older stuff.
__________________
Likes For habes78023:
#8
Junior Member
Thread Starter
Treks went from the three digit series to four digit series meaning aluminum, or then a four digit starting with a 2 meaning carbon fiber. They actually still made these around the same time. They then evolved to more higher numbered series and models like the Madone and Domane are now what they would call road models.
In short, Trek doesn't make a steel road frame like that Trek 400 anymore. They started phasing out steel road frames a while ago. They do still make a steel touring bike, but that's really not going to be anything like the 400 your dad liked. That would be a Trek 520, which is a good bike, just not exactly the same.
In short, Trek doesn't make a steel road frame like that Trek 400 anymore. They started phasing out steel road frames a while ago. They do still make a steel touring bike, but that's really not going to be anything like the 400 your dad liked. That would be a Trek 520, which is a good bike, just not exactly the same.
Like other posters mentioned, I will also suggest you look for another old Trek road bike (or just another brand vintage road bike in general), they aren't super expensive, they are easily available (I could look at my local craigslist right now and find 3-4 that are great picks) and they will be much closer to that Trek 400 than something new. That being said, if your dad is looking for a new new bike, then he should probably just go to a local bike shop and test ride some. Window shopping is fun and all but he won't really be able to know what he likes by just looking online. He also may find that a more upright, commuter type bike actually better suited for what he likes to ride.
That's ok. I figured as much when I posted. My assumption is that this group was the most plausible to knowing the lineage of a bike from the 80s to help point me on where I should start looking. It's pretty obvious to me my S10 to Colorado analogy really doesn't apply here as the differences in the newer bikes versus older bikes are so significant that the bikes deserved new names.
#9
Full Member
#10
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,846
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2297 Post(s)
Liked 2,054 Times
in
1,254 Posts
pic assist
#11
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,647
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 3089 Post(s)
Liked 6,589 Times
in
3,779 Posts
If it is the classic road bike style, but in a new bike that you're looking for, take a look at the Masi Gran Criterium Classico.
https://harobikes.com/collections/cl...-classico-2021
https://harobikes.com/collections/cl...-classico-2021
__________________
#12
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,507
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2743 Post(s)
Liked 3,390 Times
in
2,053 Posts
That 400T was a "sport touring" with long wheelbase, triple crank, and lots of braze ons (depending on year) with geometry similar or equal to the 520. The current "equal" would probably be the 520
#13
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,796
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
My vote is to find another Trek 400, or even the Elance version. I’m not even a big Trek guy, but they are really nice riding steel bikes.
Even after rehabbing, and upgrading items, you would be saving a lot over a modern “equivalent”. might be a fun project to do together.
That said, your dad might enjoy a carbon modern bike better?
Test ride probably is in the cards...
Even after rehabbing, and upgrading items, you would be saving a lot over a modern “equivalent”. might be a fun project to do together.
That said, your dad might enjoy a carbon modern bike better?
Test ride probably is in the cards...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#14
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,507
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2743 Post(s)
Liked 3,390 Times
in
2,053 Posts
#15
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
That's not out of the equation, but I don't know what the lineage is to find an equal bike.
In the car world an example would be Chevy made an S10 from the late 80s to the 2000s, but it was replaced afterwards with the Chevy Colorado and so if I was looking for a vehicle like an S10 after 2003 I would shop the Colorado.
In the car world an example would be Chevy made an S10 from the late 80s to the 2000s, but it was replaced afterwards with the Chevy Colorado and so if I was looking for a vehicle like an S10 after 2003 I would shop the Colorado.
The 1988 Trek 400 (and 400T) were situated about second from the bottom in Trek's hierarchy. It sounds low- but you'll hear "Trek's low end bikes are like other manufacturer's midline bikes" and it's true. The 400T (like your Dad's) has a TrueTemper CrMo frame with CrMo fork and stays, and the component group is a mix of upper mid/lower high end stuff. The derailleurs are Deore- which would be 2nd from the top of Shimano's MTB group. That adds up to a really quality bike.
I'm completely unfamiliar with how Trek's lines are set up these days- but like KAH mentioned- that Domane AL2 in their "Gravel Bikes" section or as dedhed mentioned- the 520 look about right... sorta.
People asked where you are because people here LOVE to do bike shopping with other people's money- people will CL shop for you and pick out cool stuff and other people will give pros and cons.
Good luck!
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#16
Senior Member
Join Date: Dec 2005
Posts: 17,153
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3807 Post(s)
Liked 6,676 Times
in
2,607 Posts
You can find plenty of brand new steel frames with sport touring geometry. They'll probably take a wider tire than would the Trek 400, too, like this one: https://www.somafab.com/archives/pro...dero-frame-set
Likes For nlerner:
Likes For Germany_chris:
#18
Junior Member
Thread Starter
Thanks everyone for the replys. I think I got the jist of the lineup changes now. So I'll go to the store and have him try the Domane AL 2 and the Trek 520 (which I like that trek gave it the old school styling). In the meantime I'll be on the look out for 400T like he previously had. Is there any obvious way to tell the difference between a 400 and 400T. I didn't know I had a T model till everyone here mentioned it.
Those are nice. As mechanically inclined as I am, I'm unfortunately a bit short on bike tools at the moment. I was able on this bike to swap the destroyed tires, straighten the wheels, fix the brake rub and tune the brakes, tune the gearing a bit, affix and lube the chain, remove the stuck seat post, and clean everything up.
But I know I'm short on tools around fork assembly and my knowledge on gearing is still rookie. While working on these old bikes is fascinating to me, I am a bit saddened that almost none of my automotive, electronic, or house tools really carry over for bike work. And I ended up dropping around $100 on a new set of tools just for bikes (including the bike stand). So I have a little bit to save up before I'll try a full bike build.
No Surly bike shop near me to try I only have Trek and Specialized bikes available new in my area (at least to sit and try, online might be different)
But I know I'm short on tools around fork assembly and my knowledge on gearing is still rookie. While working on these old bikes is fascinating to me, I am a bit saddened that almost none of my automotive, electronic, or house tools really carry over for bike work. And I ended up dropping around $100 on a new set of tools just for bikes (including the bike stand). So I have a little bit to save up before I'll try a full bike build.
No Surly bike shop near me to try I only have Trek and Specialized bikes available new in my area (at least to sit and try, online might be different)
Last edited by cb400bill; 06-20-21 at 04:26 AM.
#19
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,417
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 529 Post(s)
Liked 1,001 Times
in
513 Posts
Thanks everyone for the replys. I think I got the jist of the lineup changes now. So I'll go to the store and have him try the Domane AL 2 and the Trek 520 (which I like that trek gave it the old school styling). In the meantime I'll be on the look out for 400T like he previously had. Is there any obvious way to tell the difference between a 400 and 400T. I didn't know I had a T model till everyone here mentioned it.
1988 Trek 400T, as found.
Likes For Pompiere:
#20
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,851
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 759 Post(s)
Likes: 0
Liked 810 Times
in
471 Posts
You can visit the Trek archive to help get your bearings with respect to when the 400 was made. If you find one used, check the color on this list and you'll find the year it was made.
Trek Bike Models by Year and Color
There are tons of used steel road bikes available on craigslist. The nice thing about Trek is the catalog archive(scroll up on the site above..lots of info available). You can track nearly any older, steel bike back to year and components from an ad by knowing the model and color. Trek also had big sales numbers..so you'll see them used.
If your dad tends to like sitting upright more than the road bike (drop bars) posture, look into the Trek 7.x FX series. (7.1, 7.2...etc). The 7.5 is a nice, fast, comfortable bike with decent tires on it(dump the hardcase tires they come with..replace with Panaracer Gravelking slicks 700x35).
Trek Bike Models by Year and Color
There are tons of used steel road bikes available on craigslist. The nice thing about Trek is the catalog archive(scroll up on the site above..lots of info available). You can track nearly any older, steel bike back to year and components from an ad by knowing the model and color. Trek also had big sales numbers..so you'll see them used.
If your dad tends to like sitting upright more than the road bike (drop bars) posture, look into the Trek 7.x FX series. (7.1, 7.2...etc). The 7.5 is a nice, fast, comfortable bike with decent tires on it(dump the hardcase tires they come with..replace with Panaracer Gravelking slicks 700x35).
Likes For fishboat:
#21
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,833
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,063 Times
in
535 Posts
Trek 400s are pretty easy to find, they made a lot of them. Don’t know where you live, but searching my local Milwaukee Craigslist site, there are currently 9 listed.
Of all my bikes, my 88 400t is my favorite, the most versatile, and gets the most miles. Found it hanging in a shed in San Antonio rotting away, cleaned it up, and upgraded the wheels, not a fan of Treks Matrix rims and Mallard hubs. Good luck replicating the feel and ride of a 400, with a modern bike.
Tim
1988 Trek 400t
Of all my bikes, my 88 400t is my favorite, the most versatile, and gets the most miles. Found it hanging in a shed in San Antonio rotting away, cleaned it up, and upgraded the wheels, not a fan of Treks Matrix rims and Mallard hubs. Good luck replicating the feel and ride of a 400, with a modern bike.
Tim
1988 Trek 400t
Likes For tkamd73:
#22
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,695
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1533 Post(s)
Liked 1,528 Times
in
916 Posts
CleanClassics , what the guys are asking is, what city and state do you live in? Some of them really want to go CL shopping for you; it's a fun hobby. I don't think anyone will track you down and stalk you with that minimal info.
Likes For Korina:
#23
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Trek 400s are pretty easy to find, they made a lot of them. Don’t know where you live, but searching my local Milwaukee Craigslist site, there are currently 9 listed.
Of all my bikes, my 88 400t is my favorite, the most versatile, and gets the most miles. Found it hanging in a shed in San Antonio rotting away, cleaned it up, and upgraded the wheels, not a fan of Treks Matrix rims and Mallard hubs. Good luck replicating the feel and ride of a 400, with a modern bike.
Tim
1988 Trek 400t
Of all my bikes, my 88 400t is my favorite, the most versatile, and gets the most miles. Found it hanging in a shed in San Antonio rotting away, cleaned it up, and upgraded the wheels, not a fan of Treks Matrix rims and Mallard hubs. Good luck replicating the feel and ride of a 400, with a modern bike.
Tim
1988 Trek 400t
Yeah of all my bikes, my 1979 Trek 510 gets the most miles. Trek just dialed it in with the sports touring geometry.
Likes For bikemig:
#24
Full Member
Join Date: Dec 2012
Location: Eastern Washington
Posts: 440
Bikes: 1978 Raleigh Competition-1974 Raleigh Folder-1983 Austro Daimler-198? Fuji Monterey-Surly LHT-Surly Karate Monkey-Surly Cross Check
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Liked 97 Times
in
54 Posts
One other thing that might help is to know what your budget is? If you're working on a tight budget, then I would suggest you just be patient try to find another older steel Trek. They can still be found, usually for a very reasonable price. If you have the budget and willingness to pay for a new bike, there are some great options. Previous responses referenced Soma and Surly Cross Check. The brand new bike will certainly cost more. The had to pay $1,279 for my brand new Cross Check last month. One other disadvantage of buying new is that right now the inventory is quite low due to supply chain constraints from the COVID pandemic.
#25
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,833
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,063 Times
in
535 Posts
Great looking bike. The light blue and yellow with the black rims works nicely together. I like running aero levers on my vintage bikes as well especially when running a fat tire to give me a double quick release for the front wheel. And it does provide better braking.
Yeah of all my bikes, my 1979 Trek 510 gets the most miles. Trek just dialed it in with the sports touring geometry.
Yeah of all my bikes, my 1979 Trek 510 gets the most miles. Trek just dialed it in with the sports touring geometry.
Tim
Last edited by tkamd73; 06-20-21 at 05:43 PM.