Go Back  Bike Forums > Bike Forums > Fifty Plus (50+)
Reload this Page >

Stabilizing wheels for seniors

Notices
Fifty Plus (50+) Share the victories, challenges, successes and special concerns of bicyclists 50 and older. Especially useful for those entering or reentering bicycling.

Stabilizing wheels for seniors

Old 12-16-12, 12:24 PM
  #1  
Nightshade
Humvee of bikes =Worksman
Thread Starter
 
Nightshade's Avatar
 
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 6 Times in 6 Posts
Stabilizing wheels for seniors

Ran across this product for seniors to help them ride when they have balance issues. Balance is THE issue that kept me off my bike all of 2012 summer.

https://www.eztrainingwheels.com/?s=adult

Am thinking about trying a set if I can find someone with some knowledge of how well they work as well as the product quality.

Anyone**********

(Note: I have a trike that I also ride but I want back on my bike too. )
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.

Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?

Last edited by Nightshade; 12-16-12 at 12:28 PM.
Nightshade is offline  
Old 12-16-12, 12:35 PM
  #2  
GeorgeBMac
Senior Member
 
GeorgeBMac's Avatar
 
Join Date: Jul 2012
Location: Pittsburgh, PA
Posts: 2,061

Bikes: 2012 Trek DS 8.5 all weather hybrid, 2008 LeMond Poprad cyclocross, 1992 Cannondale R500 roadbike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Nightshade
Ran across this product for seniors to help them ride when they have balance issues. Balance is THE issue that kept me off my bike all of 2012 summer.

https://www.eztrainingwheels.com/?s=adult

Am thinking about trying a set if I can find someone with some knowledge of how well they work as well as the product quality.

Anyone**********

(Note: I have a trike that I also ride but I want back on my bike too. )
I haven't seen them and I haven't used them -- so I can't speak for their quality or functionality. But, from the video they look pretty solid and pretty functional. I doubt if they will cure balance problems -- but it looks like they would help and would offer an extra margin of safety.

So, I would say: Go For It!
... What do you have to lose? And it might get you back on the bike you prefer. And that is a GOOD thing!

As the 70's Steelers used to say: "Whatever it takes...
GeorgeBMac is offline  
Old 12-16-12, 12:43 PM
  #3  
stapfam
Time for a change.
 
stapfam's Avatar
 
Join Date: Jan 2004
Location: 6 miles inland from the coast of Sussex, in the South East of England
Posts: 19,913

Bikes: Dale MT2000. Bianchi FS920 Kona Explosif. Giant TCR C. Boreas Ignis. Pinarello Fp Uno.

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
We have a lad locally that has a mobility problem and he used these on his MTB when using it around the town. May be not this manufacturer but at least this type and size. Got around fairly well but When I last saw him he had gone to a trike.
__________________
How long was I in the army? Five foot seven.


Spike Milligan
stapfam is offline  
Old 12-16-12, 05:48 PM
  #4  
JanMM
rebmeM roineS
 
JanMM's Avatar
 
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,216

Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 347 Times in 226 Posts
Looks as if can only be installed on bikes with nutted axles on the rear hub.
The "training wheel" name implies a product designed for short-term use. Wonder if the product will hold up to extended use.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
JanMM is offline  
Old 12-16-12, 06:14 PM
  #5  
DnvrFox
Banned.
 
DnvrFox's Avatar
 
Join Date: Aug 2001
Posts: 20,917
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 12 Times in 10 Posts
Here are four customer reviews from Amazon, in case you did not see them:
DnvrFox is offline  
Old 12-16-12, 06:27 PM
  #6  
prathmann
Senior Member
 
Join Date: Nov 2008
Location: Bay Area, Calif.
Posts: 7,239
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Likes: 0
Liked 7 Times in 6 Posts
I suggest sticking with your trike - i.e. a vehicle designed for proper stability as opposed to adapting a bicycle designed for single-track stability and trying to turn it into a multi-track device.

Bicycles and motorcycles lean into turns whereas trikes and cars lean outward when turning. A bicycle with training wheels starts by leaning inward until prevented from leaning far enough by the training wheels. At that point it switches very abruptly to leaning outward onto the training wheel on the opposite side and frequently results in a bad crash. I've seen that happen often when kids try to take a corner too fast while using training wheels. I'm sure it's much less likely with older adults since they're likely to be more cautious when turning but the design has the same potential for a crash. I don't recommend 'training wheels' for either youths or adults - especially if a decent quality trike is available as an alternative.
prathmann is offline  
Old 12-17-12, 06:44 AM
  #7  
BlazingPedals
Senior Member
 
BlazingPedals's Avatar
 
Join Date: Dec 2004
Location: Middle of da Mitten
Posts: 12,478

Bikes: Trek 7500, RANS V-Rex, Optima Baron, Velokraft NoCom, M-5 Carbon Highracer, Catrike Speed

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1511 Post(s)
Liked 733 Times in 454 Posts
It's not exactly a new idea, but a bad one. Training wheels should be a temporary expedient only.

BlazingPedals is offline  
Old 12-17-12, 11:28 AM
  #8  
Nightshade
Humvee of bikes =Worksman
Thread Starter
 
Nightshade's Avatar
 
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 6 Times in 6 Posts
As some here know I already have a trike but the (kinda)problem with it is it's only 3 speed. I've tried to figure out how to put a 7>8 speed hub on it but the only way is major frame rework.

Soooooooooo.........in the maze called my mind I figured a bicycle would do as well. Well, as you can guess that didn't go smoothly at all. That means the next step is stabilizer wheels on the bike..........if they will fit with hub gearing.

Stay tuned..............
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.

Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
Nightshade is offline  
Old 12-17-12, 11:31 AM
  #9  
Nightshade
Humvee of bikes =Worksman
Thread Starter
 
Nightshade's Avatar
 
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 6 Times in 6 Posts
Originally Posted by BlazingPedals
It's not exactly a new idea, but a bad one. Training wheels should be a temporary expedient only.

One really neat idea!!! I'll bet steering is a challenge.
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.

Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
Nightshade is offline  
Old 12-17-12, 11:40 AM
  #10  
cplager
The Recumbent Quant
 
cplager's Avatar
 
Join Date: Jan 2012
Location: Fairfield, CT
Posts: 3,094

Bikes: 2012 Cruzbike Sofrider, 2013 Cruzigami Mantis, 2016 Folding CruziTandem

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
Liked 8 Times in 6 Posts
Originally Posted by Nightshade
(Note: I have a trike that I also ride but I want back on my bike too. )
I'm assuming that the reason you want back on your bike is more speed, easier ride than your current trike.
Since nobody else has used the dirty word, I will. There are a good few recumbent trikes out there that you might enjoy a lot more than your upright trike.

Cheers,
Charles
cplager is offline  
Old 12-17-12, 12:11 PM
  #11  
Homeyba
Senior Member
 
Homeyba's Avatar
 
Join Date: Jul 2009
Location: Central Coast, California
Posts: 3,370

Bikes: Colnago C-50, Calfee Dragonfly Tandem, Specialized Allez Pro, Peugeot Competition Light

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by cplager
I'm assuming that the reason you want back on your bike is more speed, easier ride than your current trike....
He rides a worksman, speed is hardly on his agenda. On the other hand, something easier to ride obviously is I don't know that recumbents are easier to ride, especially if you have balance issues to begin with. Recumbent trike as you suggested would be what I'd go for.

Last edited by Homeyba; 12-17-12 at 01:21 PM. Reason: Where'd I learn to write?
Homeyba is offline  
Old 12-17-12, 01:48 PM
  #12  
goldfinch
Senior Member
 
goldfinch's Avatar
 
Join Date: Apr 2011
Location: Minnesota/Arizona and between
Posts: 4,060

Bikes: Norco Search, Terry Classic, Serotta Classique, Trek Cali carbon hardtail, 1969 Schwinn Collegiate, Giant Cadex

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Liked 5 Times in 4 Posts
If you have a small budget maybe I would try the stabilizing wheels.

But if you have the budget for it I would get a recumbent trike with more gears. A Terratrike Rover could have 8 gears and be a lot less heavy than your Worksman and still be an easy on and off ride. Or, you can get a delta recumbent that has more gears and also is higher up off the ground than many of the trikes.

Another possibility is a crank forward bike, one that you can put your feet on the ground when you are sitting on the seat. Like an Electra townie or a Trek Pure. Cheaper than the recumbent trikes. But, they are two wheelers so if your balance isn't good once you get going they may not be for you.
goldfinch is offline  
Old 12-17-12, 02:55 PM
  #13  
rydabent
Banned
 
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924

Bikes: RANS Stratus TerraTrike Tour II

Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,056 Times in 635 Posts
A tadpole trike would be a better idea. And I found out that you dont need a kickstand either!
rydabent is offline  
Old 12-18-12, 12:14 PM
  #14  
Nightshade
Humvee of bikes =Worksman
Thread Starter
 
Nightshade's Avatar
 
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 6 Times in 6 Posts
Originally Posted by cplager
I'm assuming that the reason you want back on your bike is more speed, easier ride than your current trike.
Since nobody else has used the dirty word, I will. There are a good few recumbent trikes out there that you might enjoy a lot more than your upright trike.

Cheers,
Charles

Sorry, fellas but a "ground scraper" recumbent is not possible for me or I would own one.

I can't get "down there" to mount or dismount them.

The Worksman PAV I own is "chair high" and that is as low as I can go.
Originally Posted by Homeyba
He rides a worksman, speed is hardly on his agenda. On the other hand, something easier to ride obviously is I don't know that recumbents are easier to ride, especially if you have balance issues to begin with. Recumbent trike as you suggested would be what I'd go for.
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.

Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
Nightshade is offline  
Old 12-18-12, 01:55 PM
  #15  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,355 Times in 862 Posts
A year ago, 2 summers , I saw the epitome of 'Ride-or Die', a Harley Davidson Motor Bike,
with Training/Stabilizer wheels.. parked amongst a few Can AM trikes, 'as seen on TV'..

there was a British Company making a conversion front end for something similar,
for bicycles,

2 wheels and linkage replaced the front fork, so the handle bars steered the wheels .

here is what Google found, the bike was custom rebuilt to gain the 2 wheel front end,
then resold on flea-bay.

https://pedal-trikes.blogspot.com/201...ycle-ebay.html

The Christiania Trike is another option.

a cargo box is between the 2 wheels in front,
and the whole thing steers, as one, pivot from behind,
the headset, so frame-head is vertical and the handlebars are attached to the Box.

IDK , maybe Worksman makes one of those..

Last edited by fietsbob; 12-18-12 at 02:27 PM.
fietsbob is offline  
Old 12-18-12, 04:01 PM
  #16  
zonatandem
Senior Member
 
zonatandem's Avatar
 
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016

Bikes: Custom Zona c/f tandem + Scott Plasma single

Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times in 11 Posts
More wheels = more opportunty for more flats!
zonatandem is offline  
Old 12-18-12, 07:35 PM
  #17  
bsektzer
Senior Member
 
bsektzer's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 517

Bikes: Pinarello Paris/Ui2, BMC TeamMachine SLR01/Campy Record EPS

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
My wife rides a Terra-Trike recumbent and loves it. It's got a triple chain wheel set and a 7 speed rear cassette.
bsektzer is offline  
Old 12-19-12, 12:55 PM
  #18  
Nightshade
Humvee of bikes =Worksman
Thread Starter
 
Nightshade's Avatar
 
Join Date: May 2004
Posts: 5,362
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 6 Times in 6 Posts
Originally Posted by bsektzer
My wife rides a Terra-Trike recumbent and loves it. It's got a triple chain wheel set and a 7 speed rear cassette.
Sorry, These trikes are "pavement scrapers" that are to low for me.
__________________
My preferred bicycle brand is.......WORKSMAN CYCLES
I dislike clipless pedals on any city bike since I feel they are unsafe.

Originally Posted by krazygluon
Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred, which one would you rather have under your butt at 30mph?
Nightshade is offline  
Old 12-19-12, 12:59 PM
  #19  
LesterOfPuppets
cowboy, steel horse, etc
 
LesterOfPuppets's Avatar
 
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,777

Bikes: everywhere

Mentioned: 71 Post(s)
Tagged: 1 Thread(s)
Quoted: 12735 Post(s)
Liked 7,634 Times in 4,050 Posts
I think road racing trikes was actually a thing in Great Britain at one point. Bob Jackson made some really nice ones.

LesterOfPuppets is online now  
Old 12-19-12, 01:33 PM
  #20  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,355 Times in 862 Posts
'Body English', Phrase, might have come from getting those to corner fast enough ..
fietsbob is offline  
Old 12-19-12, 01:43 PM
  #21  
sundaecommuter
Member
 
sundaecommuter's Avatar
 
Join Date: Oct 2012
Location: Doveton, Victoria, Australia
Posts: 39

Bikes: Fuji - Single speed road, Elite - Peconi frame road bike from 80's, Roadmaster - commuter racer, Monty - rigid MTB, Cranky - Ross Rigid MTB and others old bikes.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Any stabalising wheels set so as to get traction in any dip in the road would be set too high to get much help on the crown of the road. So, if balance is a problem, then a trike is the best idea.
sundaecommuter is offline  
Old 12-19-12, 02:05 PM
  #22  
DnvrFox
Banned.
 
DnvrFox's Avatar
 
Join Date: Aug 2001
Posts: 20,917
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 12 Times in 10 Posts
As I understand the issues:

1. Poor balance

2. Inability to get the body low enough to sit on a typical recimbent or most trikes (except one like a Worksman)

3. and perhaps not a whole lot of $$ - but just a guess.

I believe any proposed solution must resolve issues 1 and 2 and maybe the 3rd
DnvrFox is offline  
Old 12-19-12, 05:13 PM
  #23  
ModeratedUser150120149
Senior Member
 
Join Date: May 2008
Posts: 2,712
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by LesterOfPuppets
I think road racing trikes was actually a thing in Great Britain at one point. Bob Jackson made some really nice ones.

I looked into these a few months back. They are still made and used in Great Britain. But, nowhere I could find in the US and no one over there was very interested in shipping one to the US. One person wrote they are dangerous and hard to control. From their looks I suspect they might have CG issues.
ModeratedUser150120149 is offline  
Old 12-19-12, 06:33 PM
  #24  
howsteepisit
Senior Member
 
howsteepisit's Avatar
 
Join Date: Oct 2005
Location: Eugene, OR
Posts: 4,335

Bikes: Canyon Endurace SLX 8Di2

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 509 Post(s)
Liked 30 Times in 14 Posts
From their web page:

Product comes in one model adaptable to 26’ and 28’ inch wheelbase bicycles and two colors, ED-Black and CP-Chrome.

Not sure what a 26 or 28 foot wheelbase looks like, but I am not feeling good about their bicycle experience.
howsteepisit is offline  
Old 12-19-12, 07:10 PM
  #25  
StephenH
Uber Goober
 
StephenH's Avatar
 
Join Date: Sep 2007
Location: Dallas area, Texas
Posts: 11,758
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 190 Post(s)
Liked 41 Times in 32 Posts
I'll be honest, it just seems like a bad idea to me.

I've got my Worksman front-loading tricycle, and have put a few miles on it. But one thing I notice is that having 3 wheels does not eliminate the need for balance and handling ability. Yes, if you stay on flat land and go very slowly, no problem. If you're riding at anything beyond a crawl, it's easier to turn a high 3-wheeler over than it is a bicycle. With the bicycle, you lean to compensate for the turn, and with the 3-wheeler, that is awkward to do- you tend to stay flat until it's too late.

It seems to me that the training-wheel solution would have similar problems, perhaps worse. For one thing, the weight is not all on the training wheels, so it looks like it'll let you flop from side to side some, with the amount depending on your weight and how flat the ground is. If you lean into a turn like a normal bike, you don't need the training wheels. If you don't, you're fairly likely to fall over the opposite direction.

Anyway, if it was me, I'd look into the lightfoot trikes, which share some layout similarities with the Worksman trike, but have a wider range of gearing.
https://lightfootcycles.com/products-...dels-overview/
I'm sure they're more expensive, too. If it's something you actually plan to use, it'll be worth it.
__________________
"be careful this rando stuff is addictive and dan's the 'pusher'."
StephenH is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.