Swapping handlebars on 1997 Trek Multitrack 730 for Upright ride
#1
Newbie
Thread Starter
Join Date: Jun 2015
Location: Rochester, NY
Posts: 3
Bikes: 1997 Trek Multitrack 730
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Swapping handlebars on 1997 Trek Multitrack 730 for Upright ride
Hello, Way back in 1997 I bought a Trek Multitrack 730 bicycle. I rode it around Central Park in Manhattan for a year or so but never really used it much after that. I recently decided to dust it off and begin to use it here in upstate New York along the Erie Canal towpath trail. My problem is that a couple of years ago I seriously broke my left arm at the elbow. I have a steel plate and 6 long screws holding my elbow together. The handlebars on my bike force me to lean over and put quite a bit of pressure on my arms while riding. Is it possible to swap out the handlebars with something that would give me a much more upright position while riding? Is it possible to use the same shifters and brakes or do I need to swap those out as well? Thanks for your suggestions.
#2
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
You can change out the handlebar and possibly the stem. I would suggest in addition to getting a bar with a little rise, also get a bar that puts your wrists in a more natural position. Thinking about the Nitto Albatross, Velo Orange Tourist, Jones Bend H bar, or the Soma Sparrow. Just make sure whatever you buy fits your stem.
Likes For MRT2:
#3
Newbie
Thread Starter
Join Date: Jun 2015
Location: Rochester, NY
Posts: 3
Bikes: 1997 Trek Multitrack 730
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks so much. I will check these out. I rode the bike last night and wasn't thinking at all about my elbow and when I got home It was clear that I have to make a change. Thanks again!
#4
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
If those are the original tires, you might want to consider replacing. Even if the bike had low miles, the rubber in the sidewalls hardens over time.
#5
Newbie
Thread Starter
Join Date: Jun 2015
Location: Rochester, NY
Posts: 3
Bikes: 1997 Trek Multitrack 730
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
They are the original tires... I have ridden the bike twice in the last two days and so far so good but I may be riding on borrowed time. I do plan to replace the tires as well as the handlebar set up and maybe the saddle. My body is no longer the same shape as it was in 1997...
#6
Newbie
Hello, Way back in 1997 I bought a Trek Multitrack 730 bicycle. Is it possible to swap out the handlebars with something that would give me a much more upright position while riding? Is it possible to use the same shifters and brakes or do I need to swap those out as well? Thanks for your suggestions.
#7
Am-a-tour
Join Date: Aug 2020
Location: NOVA
Posts: 126
Bikes: 2020 New Albion Privateer, 1983 Schwinn Super Sport, 2022 Rivendell Atlantis
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 65 Times
in
40 Posts
Multitracks are ripe for updating/reworking. They've got great tire clearance and good compatibility for swapping out componenets. If you check out xbiking over on ****** you'll see loads of cool ideas. Drops, alt bars, bikepacking builds, the works.
Likes For nick_a: