A small box full of Italian C&V odds & ends
#1
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,340
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 344 Times
in
196 Posts
A small box full of Italian C&V odds & ends
Here’s a package deal for someone who may be interested...
• Ale alloy toe clips (size medium if I remember right). One clip got bitten by the road and lost a bit of lower edge along the mounting point, but is still plenty serviceable. Original box included & will be stuffed full of the following items:
- NOS Ale toe clip buttons (black)
- NOS 3ttt bar end plugs (Italian flag colors)
- NOS 3ttt stem cap (angled, fits Synthesis stem if I’m not mistaken)
- Campagnolo 15mm crank arm bolts with good wrench flats & threads
- Campagnolo rear hub spacer 10mm x 11.5mm
- Campagnolo stainless rear derailleur cable housing (will include two step down ferrules not pictured)
- Gipiemme sear post binder bolt 8mm x 20mm
- Silca Impero plastic pump head w/ schrader valve fitting
- Silca brass Pista pump head for presta valves and use with floor pump
- Benotto bar tape and end caps. Was NOS until a year ago or so. Saw a couple of riding seasons wrapped over 3ttt 42cm Competizione drop bars and was still in nice shape prior to removal. Should be enough to rewrap minus brake lever strips.
— — —
$55 shipped SOLD
Paypal f&f or add 3% for G&S
• Ale alloy toe clips (size medium if I remember right). One clip got bitten by the road and lost a bit of lower edge along the mounting point, but is still plenty serviceable. Original box included & will be stuffed full of the following items:
- NOS Ale toe clip buttons (black)
- NOS 3ttt bar end plugs (Italian flag colors)
- NOS 3ttt stem cap (angled, fits Synthesis stem if I’m not mistaken)
- Campagnolo 15mm crank arm bolts with good wrench flats & threads
- Campagnolo rear hub spacer 10mm x 11.5mm
- Campagnolo stainless rear derailleur cable housing (will include two step down ferrules not pictured)
- Gipiemme sear post binder bolt 8mm x 20mm
- Silca Impero plastic pump head w/ schrader valve fitting
- Silca brass Pista pump head for presta valves and use with floor pump
- Benotto bar tape and end caps. Was NOS until a year ago or so. Saw a couple of riding seasons wrapped over 3ttt 42cm Competizione drop bars and was still in nice shape prior to removal. Should be enough to rewrap minus brake lever strips.
— — —
Paypal f&f or add 3% for G&S
Last edited by deux jambes; 09-01-21 at 05:59 PM.