Cracked frame
#1
Rad rider
Thread Starter
Join Date: Jun 2021
Location: San Francisco
Posts: 1
Bikes: Radcitycruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cracked frame
I recently cracked the frame tube that contains the seat post it's just above the welds , wondering if I can have it repaired anybody knows anything I'd love to hear it
Yes the frame is steel does anybody know if there a way I can post a picture on this forum?
Yes the frame is steel does anybody know if there a way I can post a picture on this forum?
Last edited by JasonJas; 06-24-21 at 01:09 PM.
#3
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,464
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 955 Post(s)
Liked 1,619 Times
in
1,039 Posts
Yes... Not so hard a repair, If its a steel bike. A simple braze and a grind will do. If the crack is well approximated all you may need is a little silver solder...
If its aluminium or carbon then its another story...
If its aluminium or carbon then its another story...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#4
Senior Member
Join Date: May 2018
Location: Fargo ND
Posts: 898
Bikes: Time Scylon, Lynskey R350, Ritchey Breakaway, Ritchey Double Switchback, Lynskey Ridgeline, ICAN Fatbike
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 463 Post(s)
Liked 546 Times
in
306 Posts
I had a crack that migrated from the bottom of the slot around the circumference of the tube. It was repaired by cutting off the existing seat post clamp tabs, grinding out the crack and welding a new seat post clamp over the tube.
#5
Senior Member
Join Date: Jan 2013
Location: South Jersey
Posts: 2,262
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 713 Post(s)
Liked 796 Times
in
473 Posts
If it is steel, it can be repaired. Even without a picture, I can almost guarantee it was caused by your seatpost not being inserted far enough into the frame.
#6
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18350 Post(s)
Liked 4,502 Times
in
3,346 Posts
If you simply click on the picture link, it will upload a photo to your album:
https://www.bikeforums.net/g/user/541473
From there, refer back to my post #6, and people will find it.
https://www.bikeforums.net/g/user/541473
From there, refer back to my post #6, and people will find it.
#7
Senior Member
Join Date: Feb 2006
Location: Sin City, Nevada
Posts: 2,884
Bikes: Catrike 700, Greenspeed GTO trike, , Linear LWB recumbent, Haluzak Horizon SWB recumbent, Balance 450 MTB, Cannondale SM800 Beast of the East
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Likes: 0
Liked 227 Times
in
179 Posts
Pictures of crack
Here are the images the OP needed to post. Cracked frame at seatpost insertion point.
#8
Senior Member
Join Date: Mar 2019
Posts: 1,606
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 581 Post(s)
Liked 921 Times
in
518 Posts
That's a 'NO'. Sorry, JasonJas . ANy weld repair will not be as strong as the original, which was already not strong enough.
THis was likely caused by a too-short seatpost, though. Seatposts have a 'minimum insertion' mark, but I am never sure if the seatpost is designed for the mark to be at the top of an unsupported extension on top of the seat tube, or if it is better to make sure the mark is down near the tube junction where there is support.
THis was likely caused by a too-short seatpost, though. Seatposts have a 'minimum insertion' mark, but I am never sure if the seatpost is designed for the mark to be at the top of an unsupported extension on top of the seat tube, or if it is better to make sure the mark is down near the tube junction where there is support.
#10
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,341
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,201 Times
in
2,357 Posts
That's a 'NO'. Sorry, JasonJas . ANy weld repair will not be as strong as the original, which was already not strong enough.
THis was likely caused by a too-short seatpost, though. Seatposts have a 'minimum insertion' mark, but I am never sure if the seatpost is designed for the mark to be at the top of an unsupported extension on top of the seat tube, or if it is better to make sure the mark is down near the tube junction where there is support.
THis was likely caused by a too-short seatpost, though. Seatposts have a 'minimum insertion' mark, but I am never sure if the seatpost is designed for the mark to be at the top of an unsupported extension on top of the seat tube, or if it is better to make sure the mark is down near the tube junction where there is support.
As for the break being caused by the seatpost not being inserted far enough, that’s a possibility but I broke a frame in a similar place because I was using a very long set back seatpost. The post was inserted far enough into the frame but the setback cause too much stress above the frame junction. The seat stays on the bike came in a lot lower than this frame, however.
Just to be clear, I probably wouldn’t try to fix the frame for years of riding but as a short term fix, it’s viable. It’s probably not worth the cost of the fix, however. Frames are fairly cheap.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#11
Senior Member
Join Date: Mar 2019
Posts: 1,606
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 581 Post(s)
Liked 921 Times
in
518 Posts
Your “NO” is far too hard. A weld at the crack would hold up for a while but the problem isn’t the weld but the lack of annealing the frame afterwards. It could be welded to get you down the road but it’s not a long term fix.
As for the break being caused by the seatpost not being inserted far enough, that’s a possibility but I broke a frame in a similar place because I was using a very long set back seatpost. The post was inserted far enough into the frame but the setback cause too much stress above the frame junction. The seat stays on the bike came in a lot lower than this frame, however.
A competent welder should cause any kind of deformation of the tube when welding. Heat transfer for MIG welding is relatively localized.
Just to be clear, I probably wouldn’t try to fix the frame for years of riding but as a short term fix, it’s viable. It’s probably not worth the cost of the fix, however. Frames are fairly cheap.
As for the break being caused by the seatpost not being inserted far enough, that’s a possibility but I broke a frame in a similar place because I was using a very long set back seatpost. The post was inserted far enough into the frame but the setback cause too much stress above the frame junction. The seat stays on the bike came in a lot lower than this frame, however.
A competent welder should cause any kind of deformation of the tube when welding. Heat transfer for MIG welding is relatively localized.
Just to be clear, I probably wouldn’t try to fix the frame for years of riding but as a short term fix, it’s viable. It’s probably not worth the cost of the fix, however. Frames are fairly cheap.
#12
Live not by lies.
Join Date: Nov 2020
Posts: 1,306
Bikes: BigBox bikes.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 860 Post(s)
Liked 784 Times
in
582 Posts
I had a BMX frame crack somewhat similar to that in high school. But it was opposite, cracked on the side with the slot.
Took it into our welding/metal shop teacher. He cleaned it up and tig welded it in maybe 10 minutes.
I think the crack was caused by a QR cam to adjust the seat post on a bike that maybe wasn’t designed for it.
Anyway. Beat on the bike another year or so. It didn’t crack again.
Took it into our welding/metal shop teacher. He cleaned it up and tig welded it in maybe 10 minutes.
I think the crack was caused by a QR cam to adjust the seat post on a bike that maybe wasn’t designed for it.
Anyway. Beat on the bike another year or so. It didn’t crack again.
#13
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,428
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3129 Post(s)
Liked 1,697 Times
in
1,026 Posts
That doesn't look like a steel frame, it looks aluminum.
#14
Live not by lies.
Join Date: Nov 2020
Posts: 1,306
Bikes: BigBox bikes.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 860 Post(s)
Liked 784 Times
in
582 Posts
And it shouldn’t warp to bad. Steel pulls to the side heated up. A crack like that is already hard up against where it would go.
I’ve used steel warping to my advantage, not in a bike context though.
I’d say you got not much to lose if you like the frame.
I’ve used steel warping to my advantage, not in a bike context though.
I’d say you got not much to lose if you like the frame.
#15
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18350 Post(s)
Liked 4,502 Times
in
3,346 Posts
Depending on the tube size, there are a few internal locking seatposts. Mostly vintage, and often not real long. 27.2mm? However, it might be possible to make one too.
#16
Senior Member
This. Also, the welds in your pic look too big for steel. I suspect it's an aluminum frame, in which case NO you shouldn't get it repaired.
Likes For BlazingPedals:
#18
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,341
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,201 Times
in
2,357 Posts
The area is unsupported and broke because of a seatpost with massive setback (a Titec Hellbent post with 1.5” of offset). A machinist friend at work welded it and it lasted for many years…and I’m not a light guy. I didn’t use the Hellbent post again, however. The machinist is a master welder whose had no problem with doing the weld and wasn’t concerned about it failing. It certainly lasted more “than the ride home from the welding shop”.
It would be better to get a new frame…and probably cost just about as much…but welding would hold up for quite a while even for aluminum.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#19
Senior Member
Join Date: Feb 2006
Location: Sin City, Nevada
Posts: 2,884
Bikes: Catrike 700, Greenspeed GTO trike, , Linear LWB recumbent, Haluzak Horizon SWB recumbent, Balance 450 MTB, Cannondale SM800 Beast of the East
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Likes: 0
Liked 227 Times
in
179 Posts
Stick a magnet by the frame and you will instantly confirm whether or not it is steel versus aluminum.
Likes For VegasTriker:
#20
Senior Member
Join Date: Jan 2013
Location: South Jersey
Posts: 2,262
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 713 Post(s)
Liked 796 Times
in
473 Posts
I build bike frames and that is definitely an aluminum frame. As for welding it, if it were mine, I would weld it and make sure I had a long enough seat post in the future. I have personally welded an aluminum MTB frame with a similar failure due to a short seatpost. I advised the owner(a friend) that he needed a longer seat post and that the weld may crack again in the future. He is a large rider, over 6' tall and over 250lbs and that frame is still going 2 years later.
With a proper length seatpost that extends a couple of inches below the top tube, the worst that can happen from a future failure of the repair would be an annoying creaking sound and maybe some side to side rotation of the saddle.
With a proper length seatpost that extends a couple of inches below the top tube, the worst that can happen from a future failure of the repair would be an annoying creaking sound and maybe some side to side rotation of the saddle.
Likes For dsaul:
#21
Live not by lies.
Join Date: Nov 2020
Posts: 1,306
Bikes: BigBox bikes.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 860 Post(s)
Liked 784 Times
in
582 Posts
I build bike frames and that is definitely an aluminum frame. As for welding it, if it were mine, I would weld it and make sure I had a long enough seat post in the future. I have personally welded an aluminum MTB frame with a similar failure due to a short seatpost. I advised the owner(a friend) that he needed a longer seat post and that the weld may crack again in the future. He is a large rider, over 6' tall and over 250lbs and that frame is still going 2 years later.
With a proper length seatpost that extends a couple of inches below the top tube, the worst that can happen from a future failure of the repair would be an annoying creaking sound and maybe some side to side rotation of the saddle.
With a proper length seatpost that extends a couple of inches below the top tube, the worst that can happen from a future failure of the repair would be an annoying creaking sound and maybe some side to side rotation of the saddle.
#22
Banned.
Join Date: Jun 2004
Location: Torrance, CA
Posts: 3,061
Bikes: Homebuilt steel
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 2193 Post(s)
Liked 425 Times
in
337 Posts
Yes, weld it. If the frame is 7000 series aluminum it will age harden on it's own. Even if it's 6000 series that's not a super risky place for a repair. As mentioned be sure you have a nice long seat post that goes well down the tube below the weld zone (just in case.)
#23
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
There is a reason why bikes and seat posts have a " minimum insertion point " , you need to follow that and then your frame wouldn't crack.
#24
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,428
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3129 Post(s)
Liked 1,697 Times
in
1,026 Posts
That’s not necessarily true, not at all. That should be obvious for a lot of reasons, not the least of which is the fact that minimum insertion marks are specific to seatposts and have nothing to do with the frame they are used in
#25
Guest
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,270 Times
in
1,439 Posts
I agree with those recommending a replacement frame. I had a bike break there and went to the trouble of having it re-welded under warranty. I followed seatpost protocol, but it broke again within a year. Later models of the same frame were re-designed to eliminate that weak point.