Bike stuff that bugs you more than it bugs most people
#1
Bike Butcher of Portland
Thread Starter
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4669 Post(s)
Liked 5,768 Times
in
2,272 Posts
Bike stuff that bugs you more than it bugs most people
I have an unnatural aversion to bolt on derailleur claws. While touring down Hwy 1 in California when I was 18, I had a couple of flats. Getting the wheel back in with these things is difficult - they seemed to always want to rotate and stop the hub from going in. In addition, I couldn't seem to get the quick release on the rear wheel tight enough so that the wheel wouldn't shift and rub against the chainstays when I'd stand up and pedal hard. Now when I see a decent bike frame without a derailleur hanger I think "braze one on", or relegate to IGH.
Another thing that I avoid is black anodized parts. Working in an LBS in the 80's the cycle of black anodizing was in. Unless you were very careful assembling the bike a small scratch would scream out at you - the metal is silver colored under that black anodization. To this day I avoid black anodized parts.
With regards to bikes, what bugs you more than it bugs most people?
Another thing that I avoid is black anodized parts. Working in an LBS in the 80's the cycle of black anodizing was in. Unless you were very careful assembling the bike a small scratch would scream out at you - the metal is silver colored under that black anodization. To this day I avoid black anodized parts.
With regards to bikes, what bugs you more than it bugs most people?
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#2
Happy With My Bikes
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,185
Bikes: Hi-Ten bike boomers, a Trek Domane and some projects
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 868 Post(s)
Liked 2,277 Times
in
1,099 Posts
I think most C&V readers now would be bothered now, but apparently when I was a kid it bothered me more than most people to turn drop bars upward. Everyone I saw with a "10 speed" or "racing bike" as they were called then turned their bars upward as soon as they got their new bike home.
Likes For Chuck M:
#3
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 14,100
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4493 Post(s)
Liked 6,297 Times
in
3,632 Posts
I'm with ya on both of those, add kickstands to them and keep a Sharpie handy for the scratches.
#4
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,852
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2151 Post(s)
Liked 3,380 Times
in
1,198 Posts
‘Anatomica’ handle bars. Especially black ones. Ugly and never understood the reasoning behind them.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#5
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 9,991
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4311 Post(s)
Liked 2,954 Times
in
1,601 Posts
Terminology: front fork, rear cassette.
Likes For DiabloScott:
#7
Senior Member
Join Date: Feb 2017
Location: Concord, NC
Posts: 693
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 233 Post(s)
Liked 346 Times
in
187 Posts
Fork drop out QR retention/liability schemes that make a nutted hub seem more preferable. I never had one but worked on many that did!
I don't want to start anything but... bars wrapped bottom to top.
I don't want to start anything but... bars wrapped bottom to top.
Likes For Bianchi84:
#8
Senior Member
Join Date: Aug 2013
Posts: 2,336
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,897 Times
in
889 Posts
The first thing that comes to mind is the marketing and how many people fall for it.
Take grease, for instance. There is already a sufficiently huge variety of grease to choose from that is readily available at lots of retail stores all over and will easily keep a bicycle operating as intended. But no. Bicycles somehow need "special" grease that comes in a "special" smaller container, and of course costs way more.
Take grease, for instance. There is already a sufficiently huge variety of grease to choose from that is readily available at lots of retail stores all over and will easily keep a bicycle operating as intended. But no. Bicycles somehow need "special" grease that comes in a "special" smaller container, and of course costs way more.
Likes For BFisher:
#9
Senior Member
Join Date: Jun 2006
Posts: 20,322
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 3449 Post(s)
Liked 2,800 Times
in
1,974 Posts
Kickstands that crush the chainstays.
Likes For repechage:
#10
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,624
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1007 Post(s)
Liked 2,465 Times
in
1,030 Posts
Most jersey graphics in the last 20 or 30 years. Just because you can sublimate every color of the rainbow in any random pattern onto a single garment doesn't mean that you should.
Shorts that aren't black.
Shoes that aren't black.
Socks that aren't white.
Yes, I am old. Now get off my lawn.
Shorts that aren't black.
Shoes that aren't black.
Socks that aren't white.
Yes, I am old. Now get off my lawn.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
#11
Senior Member
Join Date: Nov 2013
Location: Big Apple
Posts: 1,632
Bikes: yes
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 510 Post(s)
Likes: 0
Liked 401 Times
in
172 Posts
The first thing that comes to mind is the marketing and how many people fall for it.
Take grease, for instance. There is already a sufficiently huge variety of grease to choose from that is readily available at lots of retail stores all over and will easily keep a bicycle operating as intended. But no. Bicycles somehow need "special" grease that comes in a "special" smaller container, and of course costs way more.
Take grease, for instance. There is already a sufficiently huge variety of grease to choose from that is readily available at lots of retail stores all over and will easily keep a bicycle operating as intended. But no. Bicycles somehow need "special" grease that comes in a "special" smaller container, and of course costs way more.
https://www.ebay.com/sch/i.html?_fro...&LH_Complete=1
I've got one of these that a bought about 40 years ago for about five bucks. Still 2/3 full and mainly used for buttering seat posts and bolts. Something in a tube works better for bearing cups.
Likes For Vintage_Cyclist:
#12
Senior Member
Join Date: Oct 2010
Posts: 8,756
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3190 Post(s)
Liked 2,460 Times
in
1,489 Posts
I have an unnatural aversion to bolt on derailleur claws. While touring down Hwy 1 in California when I was 18, I had a couple of flats. Getting the wheel back in with these things is difficult - they seemed to always want to rotate and stop the hub from going in. In addition, I couldn't seem to get the quick release on the rear wheel tight enough so that the wheel wouldn't shift and rub against the chainstays when I'd stand up and pedal hard. Now when I see a decent bike frame without a derailleur hanger I think "braze one on", or relegate to IGH.
Another thing that I avoid is black anodized parts. Working in an LBS in the 80's the cycle of black anodizing was in. Unless you were very careful assembling the bike a small scratch would scream out at you - the metal is silver colored under that black anodization. To this day I avoid black anodized parts.
With regards to bikes, what bugs you more than it bugs most people?
Another thing that I avoid is black anodized parts. Working in an LBS in the 80's the cycle of black anodizing was in. Unless you were very careful assembling the bike a small scratch would scream out at you - the metal is silver colored under that black anodization. To this day I avoid black anodized parts.
With regards to bikes, what bugs you more than it bugs most people?
#13
Senior Member
Join Date: Oct 2010
Posts: 8,756
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3190 Post(s)
Liked 2,460 Times
in
1,489 Posts
The first thing that comes to mind is the marketing and how many people fall for it.
Take grease, for instance. There is already a sufficiently huge variety of grease to choose from that is readily available at lots of retail stores all over and will easily keep a bicycle operating as intended. But no. Bicycles somehow need "special" grease that comes in a "special" smaller container, and of course costs way more.
Take grease, for instance. There is already a sufficiently huge variety of grease to choose from that is readily available at lots of retail stores all over and will easily keep a bicycle operating as intended. But no. Bicycles somehow need "special" grease that comes in a "special" smaller container, and of course costs way more.
#14
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,090
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 963 Post(s)
Liked 1,447 Times
in
721 Posts
Racks mounted with clamps instead of brazed on. I broke two low riders touring on racks like this. Had to mend them with spare spokes and rope from the tent, in the middle of a six month tour. We were in Wales when they cracked in half. In the dark. In the rain. On a 20% incline. I get the heebie jeebies just looking at clamp-on racks these days.
As far as black anodized components go, the main trouble I have is that I often find a black anodized component that I would like to match the silver stuff on the rest of my bike. And maybe it did come in silver, but all the used ones I can find for a decent price are black. So I remove the anodizing, but it's a huge pain, either playing with caustic chemicals or generating a dust cloud with my Scotch Brite and buffing wheels. And if you miss a spot, it will be blackly glaring back at you from a sea of perfectly polished alu. What a pain!
As far as black anodized components go, the main trouble I have is that I often find a black anodized component that I would like to match the silver stuff on the rest of my bike. And maybe it did come in silver, but all the used ones I can find for a decent price are black. So I remove the anodizing, but it's a huge pain, either playing with caustic chemicals or generating a dust cloud with my Scotch Brite and buffing wheels. And if you miss a spot, it will be blackly glaring back at you from a sea of perfectly polished alu. What a pain!
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
#15
Senior Member
Join Date: Oct 2010
Posts: 8,756
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3190 Post(s)
Liked 2,460 Times
in
1,489 Posts
Likes For seypat:
#16
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,795
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
oh, probably the only thing that bothers me is large gaps in tire frame clearance.....eg. 700x23c wheels on a 27" frame. just looks off to me
Last edited by thook; 12-29-20 at 02:12 PM.
Likes For thook:
#17
Senior Member
This might be controversial for some older guys, but bars higher than or level with the saddle just looks terrible on a road bike and bugs me to no end. Doesn't matter how nice the bike is, if the bars are not at least a few centimeters below the saddle, it's going to be ugly.
Likes For th0m:
#18
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 8,379
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3846 Post(s)
Liked 6,437 Times
in
3,183 Posts
Cable housings that are too long or, usually, way too long. I mean ...
I also often see the rear brake cable routed on the drive side of the stem from a right aero lever. I mean ...
And stamped drops.
I also often see the rear brake cable routed on the drive side of the stem from a right aero lever. I mean ...
And stamped drops.
#19
Senior Member
Join Date: Dec 2005
Posts: 17,127
Mentioned: 480 Post(s)
Tagged: 0 Thread(s)
Quoted: 3788 Post(s)
Liked 6,573 Times
in
2,580 Posts
Likes For nlerner:
#20
(rhymes with spook)
Join Date: Aug 2009
Location: Winslow, AR
Posts: 2,795
Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 919 Post(s)
Liked 745 Times
in
546 Posts
#22
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,090
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 963 Post(s)
Liked 1,447 Times
in
721 Posts
Les Dilberteurs...
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Likes For scarlson:
#23
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 14,100
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4493 Post(s)
Liked 6,297 Times
in
3,632 Posts
This might be controversial for some older guys, but bars higher than or level with the saddle just looks terrible on a road bike and bugs me to no end. Doesn't matter how nice the bike is, if the bars are not at least a few centimeters below the saddle, it's going to be ugly.
It bugs me when others try to dictate how I set my bikes up.
I'm going to assume you will quit riding when you can't ride them like that anymore.
Likes For merziac:
#24
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,153
Mentioned: 200 Post(s)
Tagged: 0 Thread(s)
Quoted: 2992 Post(s)
Liked 3,704 Times
in
1,392 Posts
Long, detailed conversations about the "ideal" bike, component, setup, riding form, etc.
There is no such thing.
There is no such thing.
Likes For iab:
#25
Senior Member
Not controversial for me, glad you can own your disdain, you have plenty of company and I get it but my comfort and ability to ride all day long trumps any problem you may have with it.
It bugs me when others try to dictate how I set my bikes up.
I'm going to assume you will quit riding when you can't ride them like that anymore.
It bugs me when others try to dictate how I set my bikes up.
I'm going to assume you will quit riding when you can't ride them like that anymore.