fs: STEMS Threadless
#1
buy my bikes
Thread Starter
Join Date: Jun 2014
Location: Michigan
Posts: 1,800
Bikes: my very own customized GUNNAR CrossHairs
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 519 Post(s)
Liked 428 Times
in
249 Posts
fs: STEMS Threadless
Threadless stems:
RITCHEY about 110mm in length; about 7° in angle, about $35 shipped in the USA
bar clamp 31.8mm
-- note the face plate is smaller than the bar diameter - you know - the bars got to have shifter and .... stuff removed to swap stems. If the bar swap was easier I think I'd ask $50.... maybe.
-- the thing is labeled 100mm, but I'm measure 110mm center to center. Tough to get good photos.... on the floor... with crappy lighting... and an iPhone.
SOLD — EASTON EA70 about 110mm in length; about 7° in angle, about $35 shipped in the USA
BONTRAGER SSR about 110mm in length; about 10° in angle, about $35 shipped in the USA
bar clamp 31.8mm
(similar to this one: https://www.trekbikes.com/us/en_US/e...-stem/p/07838/ ) (pics of actual part below)
DIMENSION - high riser - about 80mm length, about 45° angle, about $20 shipped in the USA
bar clamp: 31.8mm
(kind a similar: https://www.dimensionbikeproducts.co...ts/stems/31.8o pics of actual part below)
as always, make an offer. i suck at haggling.
cheers.
THE PICS:
Ritchey
Bontrager
Dimension -- sorry i can't get that stupid safety sticker off
RITCHEY about 110mm in length; about 7° in angle, about $35 shipped in the USA
bar clamp 31.8mm
-- note the face plate is smaller than the bar diameter - you know - the bars got to have shifter and .... stuff removed to swap stems. If the bar swap was easier I think I'd ask $50.... maybe.
-- the thing is labeled 100mm, but I'm measure 110mm center to center. Tough to get good photos.... on the floor... with crappy lighting... and an iPhone.
SOLD — EASTON EA70 about 110mm in length; about 7° in angle, about $35 shipped in the USA
BONTRAGER SSR about 110mm in length; about 10° in angle, about $35 shipped in the USA
bar clamp 31.8mm
(similar to this one: https://www.trekbikes.com/us/en_US/e...-stem/p/07838/ ) (pics of actual part below)
DIMENSION - high riser - about 80mm length, about 45° angle, about $20 shipped in the USA
bar clamp: 31.8mm
(kind a similar: https://www.dimensionbikeproducts.co...ts/stems/31.8o pics of actual part below)
as always, make an offer. i suck at haggling.
cheers.
THE PICS:
Ritchey
Bontrager
Dimension -- sorry i can't get that stupid safety sticker off
Last edited by mrv; 01-01-23 at 08:28 AM. Reason: bar diameters