Thinking of doing a cheap gravel conversion
#1
Newbie
Thread Starter
Thinking of doing a cheap gravel conversion
So I’m mostly a roadie but I have a state forest with a ton of gravel roads right by my house and have been thinking of trying gravel out for a while. I’ve been trolling the web for deals and reading blogs and was wondering what others that have done gravel conversions thought of a few options I’m considering:
1. There are a few Trek Multitracks around, mostly 700s for about $100 that I could convert to drop bars.
2. There’s a Schwinn Crisscross for $25, early 90s that I’d do the same thing.
3. I have a ‘08 Cannondale 29er SL3 hard tail that I’ve considered converting but I think the reach would be too long.
4. Pick up an old steel road bike but then I feel like I’m stuck with a freewheel instead of hub if I want to change any gearing and I’m not trying to buy wheels, which is the same reason I’m not really looking at any old mtb.
I’m pretty bummed because I missed a chance at ‘93 Marin Muirwoods that looked pristine and had all its original pretty high end components.
I think ideally I’d like to get a Trek Multitrack 750 that’d be double butted cromoly and throw on the Microsoft advent drivetrain but it looks like they were all 7 speed so that won’t work and all the 750s around here go for too much to frankenbike them.
1. There are a few Trek Multitracks around, mostly 700s for about $100 that I could convert to drop bars.
2. There’s a Schwinn Crisscross for $25, early 90s that I’d do the same thing.
3. I have a ‘08 Cannondale 29er SL3 hard tail that I’ve considered converting but I think the reach would be too long.
4. Pick up an old steel road bike but then I feel like I’m stuck with a freewheel instead of hub if I want to change any gearing and I’m not trying to buy wheels, which is the same reason I’m not really looking at any old mtb.
I’m pretty bummed because I missed a chance at ‘93 Marin Muirwoods that looked pristine and had all its original pretty high end components.
I think ideally I’d like to get a Trek Multitrack 750 that’d be double butted cromoly and throw on the Microsoft advent drivetrain but it looks like they were all 7 speed so that won’t work and all the 750s around here go for too much to frankenbike them.
#2
Senior Member
You already have the Cannondale. Put some narrower tires on it and go out and ride it. You don't need drop bars to ride gravel. If you want more hand positions throw some bar ends on it for $15. If you love it then worry about buying/building something nicer.
#3
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,365
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 514 Post(s)
Liked 642 Times
in
437 Posts
The smaller tire will also lower the bike a bit, but BB clearance is not a big deal on gravel/mtb-lite. But it will reduce trail a bit and make the bike less 'heavy' steering on road-like sections.
Biggest deal with 'older' frames is that clearance for wider is often an issue. My CX bike from the 90's could barely fit 35mm... so very border line for a real gravel convert.
With the suspension fork, you can firm it up a bit; but having suspension is a big plus, when the surface gets rough.
Tires, tubes, bar ends, quite a 'value' convert, allowing you to ride offroad and wait for something really very suitable to become available - or decide whether a 'new' gravel bike is really in the cards...
I converted an '06 Spec Roubaix - and it was pretty OK, but I was very limited on tire width to only 30mm (28mm when on the wheels/rims) - it was ok... but now riding a 42mm on a gravel bike makes a big difference in riding some knarlier sections... My old mtbs are 26rs, and just not worth converting...
Ride On
Yuri
#4
Senior Member
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 2,468
Bikes: Co-Motion Cappuccino Tandem,'88 Bob Jackson Touring, Co-Motion Cascadia Touring, Open U.P., Ritchie Titanium Breakaway, Frances Cycles SmallHaul cargo bike. Those are the permanent ones; others wander in and out of the stable occasionally as well.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Likes: 0
Liked 339 Times
in
229 Posts
Yep, what they said. Converting an old MTB to drop bars often means you want the bars right on top if the steerer tube which is not very easy to do and does not handle all that well.
#5
Senior Member
So I’m mostly a roadie but I have a state forest with a ton of gravel roads right by my house and have been thinking of trying gravel out for a while. I’ve been trolling the web for deals and reading blogs and was wondering what others that have done gravel conversions thought of a few options I’m considering:
1. There are a few Trek Multitracks around, mostly 700s for about $100 that I could convert to drop bars.
2. There’s a Schwinn Crisscross for $25, early 90s that I’d do the same thing.
3. I have a ‘08 Cannondale 29er SL3 hard tail that I’ve considered converting but I think the reach would be too long.
4. Pick up an old steel road bike but then I feel like I’m stuck with a freewheel instead of hub if I want to change any gearing and I’m not trying to buy wheels, which is the same reason I’m not really looking at any old mtb.
I’m pretty bummed because I missed a chance at ‘93 Marin Muirwoods that looked pristine and had all its original pretty high end components.
I think ideally I’d like to get a Trek Multitrack 750 that’d be double butted cromoly and throw on the Microsoft advent drivetrain but it looks like they were all 7 speed so that won’t work and all the 750s around here go for too much to frankenbike them.
1. There are a few Trek Multitracks around, mostly 700s for about $100 that I could convert to drop bars.
2. There’s a Schwinn Crisscross for $25, early 90s that I’d do the same thing.
3. I have a ‘08 Cannondale 29er SL3 hard tail that I’ve considered converting but I think the reach would be too long.
4. Pick up an old steel road bike but then I feel like I’m stuck with a freewheel instead of hub if I want to change any gearing and I’m not trying to buy wheels, which is the same reason I’m not really looking at any old mtb.
I’m pretty bummed because I missed a chance at ‘93 Marin Muirwoods that looked pristine and had all its original pretty high end components.
I think ideally I’d like to get a Trek Multitrack 750 that’d be double butted cromoly and throw on the Microsoft advent drivetrain but it looks like they were all 7 speed so that won’t work and all the 750s around here go for too much to frankenbike them.
You can see some dropbar build pics on R e d d i t.
First couple years of the GT Cirque with the Tange Infinity tubing take a 700x50. https://www.flickr.com/photos/79568674@N04/8563587571
Last frame I came across went for around 400 tho.
As mentioned, frame reach for a dropbar conversion on the Cannondale is generally an issue. Position in the drops also sometimes depending how low the front end is.
Alexscycle Japan sells the sub-50mm-reach alu Dixna Neither Cross that has a decent amount of rise and is flared. A few different widths.
There's also the Veno Borderless carbon from Japan, but that costs the bomb.
Last edited by tangerineowl; 08-06-22 at 05:36 PM. Reason: txt
#6
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,611
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10955 Post(s)
Liked 7,484 Times
in
4,186 Posts
Crisscross and multitrack are great options, if they fit.
Modern standards, wide enough to fit 40mm tires, and typically goof top tube lengths to allow for drops to be used.
Modern standards, wide enough to fit 40mm tires, and typically goof top tube lengths to allow for drops to be used.
#7
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
convert a MTB? Naw, just get out and ride the thing as is.
I've mucked around converting a MTB, but for the most point there is no advantage in putting drop bars on a perfectly fine MTB. If you really really need drop bars, you need everything else a gravel bike gives you.
I've mucked around converting a MTB, but for the most point there is no advantage in putting drop bars on a perfectly fine MTB. If you really really need drop bars, you need everything else a gravel bike gives you.
#8
Newbie
hi just curious--in your reply to post converting an older MTB to gravel you mentioned 26er's not "worth" it--was that in relation to your specific bikes or is there general consensus that 26er's do not make good gravel bikes. I was possibly thinking of rebuilding a Trek 4100 or Rock Hopper I have lying around.
#9
Full Member
Join Date: Aug 2021
Location: Northeastern Oregon
Posts: 249
Bikes: 2021 Trek Verve 2 Disk
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 130 Post(s)
Liked 119 Times
in
80 Posts
hi just curious--in your reply to post converting an older MTB to gravel you mentioned 26er's not "worth" it--was that in relation to your specific bikes or is there general consensus that 26er's do not make good gravel bikes. I was possibly thinking of rebuilding a Trek 4100 or Rock Hopper I have lying around.
#10
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,851
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 759 Post(s)
Likes: 0
Liked 810 Times
in
471 Posts
rpollaro I would look around for 26 tires before skipping a 26" gravel bike conversion. There are lots of options in 26 tires yet. Do a search here on BF as there's been a fair amount of discussion on this. There's 2 or 3 threads in the last couple years that discuss available 26 inch tires. My touring bike is a drop bar converted '93 Trek 970. I run Schwalbe Big Ben tires. Fun bike to ride..pavement, gravel..doesn't matter. The fit is very similar to my road bikes. (pre-1994 trek 900 series has a shorter top tube than '94+). It feels like a road bike..for what it is, it's a fast bike.
Trek Multitracks are a good starting point also. The early 750s had the same frame geometry as a Trek 520..a drop bar road bike. Data is in the online Trek archives.
#11
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,365
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 514 Post(s)
Liked 642 Times
in
437 Posts
hi just curious--in your reply to post converting an older MTB to gravel you mentioned 26er's not "worth" it--was that in relation to your specific bikes or is there general consensus that 26er's do not make good gravel bikes. I was possibly thinking of rebuilding a Trek 4100 or Rock Hopper I have lying around.
I did 'convert' the Epic to 'Mullet', by putting a 27.5 (650b) wheel on the front, and left the 26 on the rear. It works great ! Especially for tight, difficult, chunky mtb terrain. It is heavy (Alu not CF) at 33.5 lbs without gear. The reason this worked is because the Sus Fork - FOX - had great clearance to easily fit a 27.5 2.4" wheel/tire.
The Stumpy has a Rockshox Reba fork which will not fit a 27.5 wheel/tire.
The big deal issue with 26, especially if changing to 'gravel' type tire width, is the rollover is small. So obstacles like exposed roots, rocks, ditches/holes are much more difficult to ride.
IF, you're just doing a real 'gravel' road, then rollover isn;t much of an issue.
650B and 700c are much better with rollover, and will maintain speed easier than a 26r - which makes a difference on gravel or dirt, because there's significantly more rolling resistance. SO with a 26r, you will be pedaling harder over the same terrain. This becomes more apparent when you start doing miles on either.
But if you're not concerned with handling on the type of riding you're doing, and pedaling a little harder over the distance, and don;t have a need for a certain speed level, then 26r certainly are good bikes. Nothing wrong with 26. Change the mtb lugged tires to a narrower, faster profile and go ride !
Doing a tire swap is certainly a good, inexpensive way to decide if 'gravel' is a fun thing for anyone, and also will point out things that 'work' and 'don;t work'.
The idea of 'gravel' is really ride most everything, with one bike - certainly mtb overlaps quite a bit, as does 'road' on the other end. 'Gravel' bikes are the 'jack of all' and the 'master of the middle ground' when it comes to what's out there to ride.
Ride On
Yuri
Likes For cyclezen:
#12
Newbie
thanks for the reply.
#13
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,076
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1397 Post(s)
Liked 1,876 Times
in
1,079 Posts
Maxxis DTH 26x2.15 and 2.3
Billy Bonkers 26x2.1
there are more options - I just listed the above tires I've recently purchased / used
Last edited by t2p; 09-18-22 at 10:04 AM.
#14
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,076
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1397 Post(s)
Liked 1,876 Times
in
1,079 Posts
but my youngest kid that does have a 29r off road bike prefers 26" - possibly due to his bmx background
#15
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
26" is fine. European pro mtb'ers stuck with 26" until their sponsors force them to switch. Then the manufacturers reintroduced 26" disguised as 650b. Don't take that last sentence literally. It's fun to go down to Raystown lake and see all the old 26" bikes still in heavy use. Although there were some really ill-considered suspension ideas in the 26" era.
I hope the OP is out riding his mtb unmodified. I don't know where he lives in Central PA, but here in Centre county a mountain bike works fine on our gravel. Which varies from almost paved to football sized rock. I suppose it depends on how much paved riding is involved, my gravel bike is significantly faster on pavement than my mountain bike, but once I get on to gravel it's not faster at all.
I hope the OP is out riding his mtb unmodified. I don't know where he lives in Central PA, but here in Centre county a mountain bike works fine on our gravel. Which varies from almost paved to football sized rock. I suppose it depends on how much paved riding is involved, my gravel bike is significantly faster on pavement than my mountain bike, but once I get on to gravel it's not faster at all.
#16
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,422
Bikes: Two Cross Checks, a Karate Monkey, a Disc Trucker, and a VO Randonneur
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 699 Post(s)
Liked 1,294 Times
in
647 Posts
I'm going to agree with the not using a 26. I like the wheel size just fine but I would no more spend any kind of decent money on a 26" than I would on 27"
#17
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,365
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 514 Post(s)
Liked 642 Times
in
437 Posts
So there's no confusion on my comments about 26rs. They are as good as they were when first available. And certainly fine, as is, for anyone who's happy with their 26r.
But the qualification of my comments were relative to 'conversion' to what is currently considered 'gravel bike'; and further qualification is 'cheap conversion'.
Main point being, 'conversions' can be quite pricy, and the result might still fall far short of a similar newer gravel bike - at same cost as the result of the conversion.
So, my idea of a 'cheap conversion' is = changing tires to type which a good compromise of 'road type surface' and light mtb terrain.
Bar ends might be considered a good all-round addition for all riding, and dependent on the rider. I find bar ends to be a necessity for my mtbs.
Anything further would be quite costly to do properly, and fall short of expectations (expectations being what are currently 'gravel bikes')..
Certainly ride your 26r mtb anywhere, and enjoy. ! (They also make good shopping bikes because of the low risk of theft !)
We're all talking about a continuum of cycling venues, from paved roads to serious crazy mountain/rock/boggy, iced winter,offroad terrain. What portion of that continuum you call 'gravel' will determine what might work best. Rider decides.
Ride On
Yuri
But the qualification of my comments were relative to 'conversion' to what is currently considered 'gravel bike'; and further qualification is 'cheap conversion'.
Main point being, 'conversions' can be quite pricy, and the result might still fall far short of a similar newer gravel bike - at same cost as the result of the conversion.
So, my idea of a 'cheap conversion' is = changing tires to type which a good compromise of 'road type surface' and light mtb terrain.
Bar ends might be considered a good all-round addition for all riding, and dependent on the rider. I find bar ends to be a necessity for my mtbs.
Anything further would be quite costly to do properly, and fall short of expectations (expectations being what are currently 'gravel bikes')..
Certainly ride your 26r mtb anywhere, and enjoy. ! (They also make good shopping bikes because of the low risk of theft !)
We're all talking about a continuum of cycling venues, from paved roads to serious crazy mountain/rock/boggy, iced winter,offroad terrain. What portion of that continuum you call 'gravel' will determine what might work best. Rider decides.
Ride On
Yuri
#18
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,691
Bikes: Too many bikes, too little time to ride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 430 Post(s)
Liked 460 Times
in
318 Posts
Same here, 26ers are fine, even still have an old school hardtail. But if going to start a new project, I'd go with 700c/29er. Just less to think about when sourcing parts.
#19
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
fwiw - I tried hard to adapt my hybrids for forest roads & gravel but wound up really liking an entry level 29er style MTB instead
Last edited by rumrunn6; 09-23-22 at 06:02 PM.
Likes For rumrunn6:
#20
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
#21
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
#22
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,365
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 514 Post(s)
Liked 642 Times
in
437 Posts
since we're into 26r tires...
I been a huge fan of Kenda Small Block and K-Rad, for my 26rs... and they roll among the best for gravelish/mtb-lite type terrain
Kenda Small Block 8 - 26
Kenda Small Block 8 - 26
and the Kenda R-Rad 26
Kenda K-Rad 26
Ride On
Yuri
I been a huge fan of Kenda Small Block and K-Rad, for my 26rs... and they roll among the best for gravelish/mtb-lite type terrain
Kenda Small Block 8 - 26
Kenda Small Block 8 - 26
and the Kenda R-Rad 26
Kenda K-Rad 26
Ride On
Yuri