Fiorelli
#1
Full Member
Thread Starter
Join Date: Sep 2019
Location: Tulsa, OK
Posts: 210
Bikes: 2005 Orbea Spirit + 2018 Specialized Diverge + 1974 Raleigh Competition + 1983 Centurion Pro Tour 15
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 218 Times
in
95 Posts
Fiorelli
https://www.facebook.com/marketplace...9366768921167/
I'm going to look at this bike in the morning, but would love to have a better idea what I'm looking at or looking for From the few that have appeared in these forums, I'm guessing it is from somewhere around the 1960, but with such terrible pictures it's awfully hard to tell. Any thoughts would be appreciated, though. Of course, I need a new project, so this one may come home with me regardless of your advice!
#2
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,251
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3807 Post(s)
Liked 3,331 Times
in
2,173 Posts
-----
this is one of those classically maddening listings where all of the images are of the non-drive side and in poor light at that
looks to be a mid-1960's model one up from the base sort of machine
estimate ca. 1965-68
it you are familiar with the Raleigh range of this era the cycle may be roughly parallel to the Super Course model
happily we can see no damage
Universal centrepull brakes
Huret Allvit or Svelto gear ensemble
Sheffield model 663 pedals
3TTT Tourist stem & bar set
images too poor to make out the manufacturer of the cottered steel chainset
wheels appear to be alloy wired-ons with large flange quick release hubs
on a cycle of this calibre at this time one might expect the hubs to be Gnutti
given the date they are likely to be 27" rather than 700c
readers will be able to give more information with better photos...
valuation -
think posted price within the realm of reality...although many forum regulars would probably not pay more than $35 for it at a yard sale
-----
this is one of those classically maddening listings where all of the images are of the non-drive side and in poor light at that
looks to be a mid-1960's model one up from the base sort of machine
estimate ca. 1965-68
it you are familiar with the Raleigh range of this era the cycle may be roughly parallel to the Super Course model
happily we can see no damage
Universal centrepull brakes
Huret Allvit or Svelto gear ensemble
Sheffield model 663 pedals
3TTT Tourist stem & bar set
images too poor to make out the manufacturer of the cottered steel chainset
wheels appear to be alloy wired-ons with large flange quick release hubs
on a cycle of this calibre at this time one might expect the hubs to be Gnutti
given the date they are likely to be 27" rather than 700c
readers will be able to give more information with better photos...
valuation -
think posted price within the realm of reality...although many forum regulars would probably not pay more than $35 for it at a yard sale
-----
Last edited by juvela; 07-23-21 at 07:05 PM. Reason: addition
Likes For juvela:
#3
Full Member
Thread Starter
Join Date: Sep 2019
Location: Tulsa, OK
Posts: 210
Bikes: 2005 Orbea Spirit + 2018 Specialized Diverge + 1974 Raleigh Competition + 1983 Centurion Pro Tour 15
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 218 Times
in
95 Posts
That's super helpful, juvela. Thanks!
#4
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,251
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3807 Post(s)
Liked 3,331 Times
in
2,173 Posts
-----
at this era Fiorelli was a co-sponsor of a professional racing team along with Gazzola
their star rider was the Luxembourg champion Charly Gaul
here he is shown in team livery piloting a Fiorelli during the Giro d'Italia of nineteen and sixty-one
possible that when you look at the cycle you may find it to wear a transfer making reference to the team...
-----
at this era Fiorelli was a co-sponsor of a professional racing team along with Gazzola
their star rider was the Luxembourg champion Charly Gaul
here he is shown in team livery piloting a Fiorelli during the Giro d'Italia of nineteen and sixty-one
possible that when you look at the cycle you may find it to wear a transfer making reference to the team...
-----
#5
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
My guess would be that the OP's bike of interest is of sixties vintage and probably close to entry level. That is not a comment to be taken negatively!
These older entry level steeds are inexpensive to buy and a lot of fun to restore. This old Torpado would be of similar vintage, or a bit newer, and proved to be a wonderful project and a truly rewarding ride, once the bike was finished...
$150.00 is the asking price for the OP's Firoelli and, were it my size and in my area, I would certainly consider paying that amount. However, it is the asking price. When faced with this situation, I always try to negotiate price by saying - "I like the bike. Would you consider letting it go for a bit less, say $100" (two thirds is usually my offering mark). Say that with respect and chances are good that you will go home with a truly neat old Italian bike that will fill up many hours of your time with entertaining activity and end up being a hoot to take out on the road.
My "as found" Torpado above set me back a few hundred to getting it looking and riding better than OK...
These older entry level steeds are inexpensive to buy and a lot of fun to restore. This old Torpado would be of similar vintage, or a bit newer, and proved to be a wonderful project and a truly rewarding ride, once the bike was finished...
$150.00 is the asking price for the OP's Firoelli and, were it my size and in my area, I would certainly consider paying that amount. However, it is the asking price. When faced with this situation, I always try to negotiate price by saying - "I like the bike. Would you consider letting it go for a bit less, say $100" (two thirds is usually my offering mark). Say that with respect and chances are good that you will go home with a truly neat old Italian bike that will fill up many hours of your time with entertaining activity and end up being a hoot to take out on the road.
My "as found" Torpado above set me back a few hundred to getting it looking and riding better than OK...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#6
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,828 Times
in
1,995 Posts
I have a top end Coppi by Fiorelli, in silver. Very nice underappreciated bike. Terrific fork crown.
#7
Full Member
Thread Starter
Join Date: Sep 2019
Location: Tulsa, OK
Posts: 210
Bikes: 2005 Orbea Spirit + 2018 Specialized Diverge + 1974 Raleigh Competition + 1983 Centurion Pro Tour 15
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 218 Times
in
95 Posts
Saw the bike this morning and ended up passing. Much more rust than you could see in the photos, with chrome peeling away in several places. Bummer.
#8
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,251
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3807 Post(s)
Liked 3,331 Times
in
2,173 Posts
-----
chrome -
sometimes on lower model Italian cycles the manufacturer will apply the chrome directly to the steel without the necessary for a good bond intervening copper and nickel layers
result of the practice is a "showroom chrome" which looks good about as long as the machine is in that space and then begins to blister and peel subsequently
-----
chrome -
sometimes on lower model Italian cycles the manufacturer will apply the chrome directly to the steel without the necessary for a good bond intervening copper and nickel layers
result of the practice is a "showroom chrome" which looks good about as long as the machine is in that space and then begins to blister and peel subsequently
-----