Litespeed Catalyst
04-30-21, 01:36 PM
#1
Newbie
Thread Starter
Join Date: Apr 2021
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Litespeed Catalyst
Hi. Very new to Forum desperate for some tech info.
Just purchased a frame, and in the process of building it up.
I canot find a bolt to fit the thread in the BB which holds the gear cable guide.
i suspect it maybe UNC or UNF but as I'm used to European frames and metric threads I'm stuck.
can any one let me know what the actual size and thread are please.
Regards
john D
Just purchased a frame, and in the process of building it up.
I canot find a bolt to fit the thread in the BB which holds the gear cable guide.
i suspect it maybe UNC or UNF but as I'm used to European frames and metric threads I'm stuck.
can any one let me know what the actual size and thread are please.
Regards
john D
05-01-21, 08:34 AM
#2
Senior Member
Join Date: Jun 2019
Posts: 580
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 254 Post(s)
Likes: 0
Liked 182 Times
in
141 Posts
I would be surprised if Litespeed didn't use all metric. If no one around here knows the answer, I recommend contacting Lynskey. They can probably tell you. Worst case tap it out a tiny bit larger for a known bolt size.
Likes For AeroGut:
05-01-21, 10:12 AM
#4
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,056
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4195 Post(s)
Liked 3,837 Times
in
2,295 Posts
Likely a M5 (5mmx.8mmpt). Most likely the threaded hole is gubbered up and wants a chasing with a tap. Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart:
05-01-21, 10:33 AM
#5
Full Member
Join Date: Sep 2007
Location: Seattle
Posts: 327
Bikes: Litespeed, O'Brien, Specialized, Fuji
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 15 Times
in
9 Posts
I have a 90s Classic, which may be the same, but I can't say. I just checked mine against a tap, and it looks to be metric 5mm x 0.8. Ditto on it may be damaged by previous owner.
