Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Anyone else got a Kent Nazz 700c gravel bike?

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Anyone else got a Kent Nazz 700c gravel bike?

Old 10-22-21, 10:22 PM
  #1  
psystemupdate
Junior Member
Thread Starter
 
Join Date: Oct 2021
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Likes: 0
Liked 3 Times in 2 Posts
Anyone else got a Kent Nazz 700c gravel bike?

its a steel frame for 240$ out the door at walmart...was wondering if anyone put the bike up to some abuse.
psystemupdate is offline  
Old 10-22-21, 10:29 PM
  #2  
psystemupdate
Junior Member
Thread Starter
 
Join Date: Oct 2021
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Likes: 0
Liked 3 Times in 2 Posts
Originally Posted by psystemupdate View Post
its a steel frame for 240$ out the door at walmart...was wondering if anyone put the bike up to some abuse.
anyone know if its the cheapest gravel bike with double disc brakes out there? or can someone top the kent nazz?
psystemupdate is offline  
Old 10-23-21, 12:15 AM
  #3  
katsup
Senior Member
 
katsup's Avatar
 
Join Date: May 2016
Location: Southern California
Posts: 1,653

Bikes: Soma Fog Cutter v1, Bianchi Grizzly, ParkPre Pro 825 Salsa El Mariachi, Ritchey Ultra Cotic SolarisMax

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 568 Post(s)
Liked 476 Times in 272 Posts
https://www.walmart.com/ip/Kent-700c...lack/795789960

The bottom barrel components are not going to like abuse. Frame is probably over built steel so that may be survive abuse.

Look past the "double disc brakes", any decent rim brake will stop better than cheap disc brakes.
katsup is offline  
Old 10-23-21, 02:05 AM
  #4  
Lazyass
Senior Member
 
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,331
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2426 Post(s)
Liked 616 Times in 382 Posts
I would almost rather have no bike at all instead of that one. It's a piece of crap. You can find decent or very good bikes with low miles for that price on craigslist and facebook marketplace.
Lazyass is offline  
Likes For Lazyass:
Old 10-23-21, 04:18 AM
  #5  
dsaul
Senior Member
 
Join Date: Jan 2013
Location: South Jersey
Posts: 2,108
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 652 Post(s)
Liked 615 Times in 383 Posts
I hope you don't live somewhere that has hills.
dsaul is offline  
Old 10-23-21, 04:37 AM
  #6  
Ghazmh
Senior Member
 
Ghazmh's Avatar
 
Join Date: Jan 2014
Location: The banks of the River Charles
Posts: 1,857

Bikes: 2022 Salsa Beargrease, 2020 Seven Evergreen, 2019 Honey Allroads Ti, 2018 Seven Redsky XX, 2017 Trek Boon 7, 2014 Trek 520

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 622 Post(s)
Liked 717 Times in 400 Posts
What a piece of junk.
Ghazmh is offline  
Old 10-23-21, 05:23 AM
  #7  
shelbyfv
Banned.
 
Join Date: Jun 2007
Location: TN
Posts: 10,088
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 2990 Post(s)
Liked 3,836 Times in 1,972 Posts
Great choice! Buy one or two and report back.
shelbyfv is offline  
Likes For shelbyfv:
Old 10-23-21, 09:42 AM
  #8  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,038

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1648 Post(s)
Liked 1,681 Times in 1,053 Posts
I would imagine few if anyone here has that bike, but many here have seen similar bikes after they have been used for a while.

Low quality bikes generally have such poor bearing surfaces and are so poorly assembled that bearings disintegrate over time. I’ve often wondered if all the loose and caged bearings were replaced with quality bearings, with adequate grease, and proper adjustment, probably ongoing, if the result would be the same.

It uses a 7 speed freewheel and stem shifters. It would be possible to use friction stem shifters and the bike would function well enough to be ridden, although gravel riding enjoyment might be significantly diminished. The rear axle will probably need to be replaced if it bends, but that is a cheap fix.

Aside from weight and probably low performance. Cheap disc brakes are probably the biggest problem. Even though cheap rims are usually never straight and cheap stamped calipers are not good, replacing the calipers with even slightly better ones is an inexpensive fix.

I’m not sure what can be done with cheap disc brakes other than just replace the system. I would think setup and maintaining the proper gap so the bike will stop would be a nightmare.

John

Last edited by 70sSanO; 10-23-21 at 10:12 PM.
70sSanO is offline  
Old 10-23-21, 12:25 PM
  #9  
psystemupdate
Junior Member
Thread Starter
 
Join Date: Oct 2021
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Likes: 0
Liked 3 Times in 2 Posts
thanks for replies

you guys are right about needing to replace all the bearings to at least mid grade products, lots of creaking coming from the bottom bracket...disc brakes work fine with adjustments, but definitely not as well as shimano hydraulic discs...most people would have their bike crap out because of walmart assembly, thankfully i know how to optimize most parts with some repair skills.
psystemupdate is offline  
Old 10-23-21, 12:49 PM
  #10  
gringomojado
Full Member
 
Join Date: Aug 2014
Posts: 417
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 117 Times in 72 Posts
The minute you mention Walmart, you lose the snobbish riders!
gm
gringomojado is offline  
Old 10-23-21, 12:52 PM
  #11  
psystemupdate
Junior Member
Thread Starter
 
Join Date: Oct 2021
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Likes: 0
Liked 3 Times in 2 Posts
some people got money

Originally Posted by gringomojado View Post
The minute you mention Walmart, you lose the snobbish riders!
gm
some people got money, some dont, at least its steel and can have a few upgrades to bring it up to par with something entry level worth taking out on long trails
psystemupdate is offline  
Old 10-23-21, 08:25 PM
  #12  
Vintage Schwinn
Senior Member
 
Join Date: Jun 2019
Posts: 543
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 278 Post(s)
Likes: 0
Liked 273 Times in 186 Posts
Todd Rundgren does.
Vintage Schwinn is offline  
Old 10-23-21, 08:44 PM
  #13  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 14,513

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 8239 Post(s)
Liked 5,066 Times in 2,944 Posts
Originally Posted by psystemupdate View Post
its a steel frame for 240$ out the door at walmart...was wondering if anyone put the bike up to some abuse.
I dont understand why that is considered considered gravel bike.
It has 40mm tires...and that's it. The gearing is atrocious.

Note- I am staying away from discussing the component level.

This just looks like pure marketing for the laggards.
mstateglfr is offline  
Old 10-23-21, 08:54 PM
  #14  
Reflector Guy
Senior Member
 
Reflector Guy's Avatar
 
Join Date: Jul 2020
Location: Chicago
Posts: 1,115

Bikes: Bianchi Via Nirone

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 521 Post(s)
Liked 1,002 Times in 478 Posts
Originally Posted by psystemupdate View Post
anyone know if its the cheapest gravel bike with double disc brakes out there? or can someone top the kent nazz?
Most likely almost any other bike will top the Kent Nazz.
Reflector Guy is offline  
Old 10-24-21, 07:12 AM
  #15  
shelbyfv
Banned.
 
Join Date: Jun 2007
Location: TN
Posts: 10,088
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 2990 Post(s)
Liked 3,836 Times in 1,972 Posts
Thinking Walmart may now have stores in Manila.
shelbyfv is offline  
Old 07-03-22, 10:23 AM
  #16  
Earl5607
Newbie
 
Join Date: Jul 2022
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times in 1 Post
Fills a gap

I own a Kent Nazz, I own a Rocky Mountain. The Kent Nazz fills a gap for most casual riders. I wanted a drop bar bike that I could use for road, light trails and everything in between for fitness. I put most of my biking budget into my Rocky Mountain so I needed something that didnít break the bank, enter the Nazz. Iíve logged thousands of miles on this bike over the past 2 years and havenít had any issues other than braking the plastic chain ring guard. With normal bike maintenance the bike has held up great it fits the bill for a budget friendly bike that I can use over different surfaces as a tool to maintain my fitness. Yes itís steel, itís heavy, that only makes training better. The only people who would turn their nose up at a guy riding a Nazz are bike snobs. At least they are on a bike and not the couch is my opinion.

Last edited by Earl5607; 07-03-22 at 12:07 PM.
Earl5607 is offline  
Likes For Earl5607:
Old 07-03-22, 10:46 AM
  #17  
Rolla
Victimless Criminal
 
Rolla's Avatar
 
Join Date: Sep 2020
Posts: 2,535
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1123 Post(s)
Liked 2,715 Times in 1,208 Posts
Originally Posted by Earl5607 View Post
Yes itís steel, itís heavy, that only makes training better..
That's why all the pros ride cheap, heavy, steel bikes when they train.

Originally Posted by Earl5607 View Post
The only people who would turn there nose up at a guy riding a Nazz are bike snobs.
Nah, it's not snobbery, it's just knowing better. And it's "their."
Rolla is online now  
Likes For Rolla:
Old 07-03-22, 12:14 PM
  #18  
Earl5607
Newbie
 
Join Date: Jul 2022
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times in 1 Post
Originally Posted by Rolla View Post
That's why all the pros ride cheap, heavy, steel bikes when they train.
4130 chromoly is used a lot on professional frames and forks and guess what itís still steel.
Earl5607 is offline  
Old 07-03-22, 01:40 PM
  #19  
Trakhak
Senior Member
 
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 3,240
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1186 Post(s)
Liked 1,093 Times in 637 Posts
Originally Posted by Earl5607 View Post
4130 chromoly is used a lot on professional frames and forks and guess what it’s still steel.
You said that heavy steel makes training better.

In any event, it's been a couple of decades since professional frames (i.e., those used in races by riders on professional teams) were steel.

That said, your Kent Nazz looks as if it would be an enjoyable ride, especially since it sounds as if you know what you're doing with respect to maintenance. I have a bunch of high-end bikes in carbon, aluminum, and steel, but I'm just as happy riding my old hybrid that weighs around 36 or 38 pounds with rack and panniers. It's still the same rider, regardless of what bike I'm on.

Last edited by Trakhak; 07-03-22 at 01:46 PM.
Trakhak is offline  
Likes For Trakhak:
Old 07-03-22, 02:03 PM
  #20  
Rolla
Victimless Criminal
 
Rolla's Avatar
 
Join Date: Sep 2020
Posts: 2,535
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1123 Post(s)
Liked 2,715 Times in 1,208 Posts
Originally Posted by Earl5607 View Post
4130 chromoly is used a lot on professional frames and forks and guess what itís still steel.
No professional outside of BMX rides a 4130 chromoly frame. And that Kent is not 4130 chromoly. Now, you can rationalize buying the thing any way you want to, but the myth that riding a heavy bike "makes training better" has long since been debunked. A watt is a watt.
Rolla is online now  
Old 07-03-22, 07:56 PM
  #21  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 14,513

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 8239 Post(s)
Liked 5,066 Times in 2,944 Posts
Originally Posted by Earl5607 View Post
4130 chromoly is used a lot on professional frames and forks and guess what itís still steel.
All my bikes are steel, but even I can see that your claim is incorrect.
mstateglfr is offline  
Likes For mstateglfr:
Old 07-03-22, 08:34 PM
  #22  
Rcrxjlb
Senior Member
 
Rcrxjlb's Avatar
 
Join Date: Dec 2013
Location: Dallas, Tx
Posts: 341

Bikes: Unknown Kalin MTB, 2013 Denali, 1977 Raleigh from Malaysia, 1982 Univega Nuovo Sport

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 3 Times in 2 Posts
What a beautiful piece of junk...
Rcrxjlb is offline  
Old 07-04-22, 12:58 AM
  #23  
koala logs
Senior Member
 
Join Date: May 2022
Posts: 517
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 269 Post(s)
Liked 131 Times in 108 Posts
Originally Posted by katsup View Post
https://www.walmart.com/ip/Kent-700c...lack/795789960

The bottom barrel components are not going to like abuse. Frame is probably over built steel so that may be survive abuse.

Look past the "double disc brakes", any decent rim brake will stop better than cheap disc brakes.
The threaded headset and the freewheel hub won't stand up to the abuse.

For a budget modern gravel bike, it should at least have sealed cartridge bearing wheel hubs with freehub rear cassette, sealed cartridge BB bearings, and threadless headset with sealed cartridge bearings. 1x drivetrain would be advantageous as cheap as these go, having less # of parts will be beneficial. These would be more expensive, probably at least $350 but is sure to stand up to the abuse of gravel riding.
koala logs is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.