How much am I losing by using clip pedals?
#1
Full Member
Thread Starter
How much am I losing by using clip pedals?
I have some pedals, I think they're KKT and they have the Christophe cages and leather straps.
I want to know how great a disadvantage I would put myself at to use these with cycling shoes or sneakers rather than SPD pedals and modest SPD shoes.
I read various sources that compared variables with respect to efficiency and comfort.
https://www.researchgate.net/publica...utdoor_sprints
This study focused on power output or mechanical efficiency and my summarization is that it found it difficult to quantify any mechanical advantage from extremely stiff (carbon fiber sole) cycling shoes to more flexible ones (nylon soles). However, it did not compare cycling shoes to much more flexible athletic shoes with EVA foam, polyurethane or rubber soles.
https://gizmodo.com/why-you-should-s...pedals-5990381
This article advocates clipless pedals, but it primarily contrasts their benefits compared to platform pedals and not pedals with clips. A lot of the advantages they cite for clipless, could be valid for clips.
https://www.bikeradar.com/features/d...tually-matter/
This article mentions the study in my first link, but also discusses a 2019 study comparing running shoes. That study found substantial benefit to cycling shoes over running shoes, but it also compared clipless pedals to platforms -- so it's not clear what portion of the benefit comes from the pedals and what portion can be ascribed to the shoe type.
One criticism of softer or flexible-soled shoes that I've read isn't related to any measurable inefficiency, but due to their tendency to focus pressure on the ball of the foot rather than disperse it over a larger portion of the shoe sole. This is a comfort issue and outside sprinting disciplines, a very valid one. But we're not proposing pushing tiny track pedals that won't drag on the banked velodrome with flexible-soled running shoes. If we're not going clipless, we're much more likely to be pedaling on reasonably large platforms and possibly with clips and straps.
I realize clips and straps are pretty much relegated to vintage status at this point -- hence posting this question in the vintage section here. I'm also asking from a perspective of touring -- perhaps 70 to 100 mile days but not at race pace. In this context, 80 seconds over 25 miles is irrelevant. The comfort factor is easy to test and that's really the only way to get the answer that's meaningful. What's not so obvious is how much energy is wasted and to what degree muscle engagement is hindered by pedaling with sneakers in clips, and how much cycling shoes in clips ameliorates those losses.
Prior to researching this, I would have thought that repeatedly compressing rubber soles would waste a lot of energy compared to hard soles that would transfer energy better. The studies that show no measurable advantage to carbon fiber soles over nylon cast doubt on the significance of the hardest soles, but don't go as far as to compare with rubber soles. Comparisons with rubber soles usually also use platform pedals and so combine any penalty of rubber soles with those of platform pedals. It's probably been a long time since anyone seriously considered whether cycling shoes with clip pedals were at any disadvantage to clipless, but for the vintage bike that gets ridden, it's a question that still matters over the long-haul.
I want to know how great a disadvantage I would put myself at to use these with cycling shoes or sneakers rather than SPD pedals and modest SPD shoes.
I read various sources that compared variables with respect to efficiency and comfort.
https://www.researchgate.net/publica...utdoor_sprints
This study focused on power output or mechanical efficiency and my summarization is that it found it difficult to quantify any mechanical advantage from extremely stiff (carbon fiber sole) cycling shoes to more flexible ones (nylon soles). However, it did not compare cycling shoes to much more flexible athletic shoes with EVA foam, polyurethane or rubber soles.
https://gizmodo.com/why-you-should-s...pedals-5990381
This article advocates clipless pedals, but it primarily contrasts their benefits compared to platform pedals and not pedals with clips. A lot of the advantages they cite for clipless, could be valid for clips.
https://www.bikeradar.com/features/d...tually-matter/
This article mentions the study in my first link, but also discusses a 2019 study comparing running shoes. That study found substantial benefit to cycling shoes over running shoes, but it also compared clipless pedals to platforms -- so it's not clear what portion of the benefit comes from the pedals and what portion can be ascribed to the shoe type.
One criticism of softer or flexible-soled shoes that I've read isn't related to any measurable inefficiency, but due to their tendency to focus pressure on the ball of the foot rather than disperse it over a larger portion of the shoe sole. This is a comfort issue and outside sprinting disciplines, a very valid one. But we're not proposing pushing tiny track pedals that won't drag on the banked velodrome with flexible-soled running shoes. If we're not going clipless, we're much more likely to be pedaling on reasonably large platforms and possibly with clips and straps.
I realize clips and straps are pretty much relegated to vintage status at this point -- hence posting this question in the vintage section here. I'm also asking from a perspective of touring -- perhaps 70 to 100 mile days but not at race pace. In this context, 80 seconds over 25 miles is irrelevant. The comfort factor is easy to test and that's really the only way to get the answer that's meaningful. What's not so obvious is how much energy is wasted and to what degree muscle engagement is hindered by pedaling with sneakers in clips, and how much cycling shoes in clips ameliorates those losses.
Prior to researching this, I would have thought that repeatedly compressing rubber soles would waste a lot of energy compared to hard soles that would transfer energy better. The studies that show no measurable advantage to carbon fiber soles over nylon cast doubt on the significance of the hardest soles, but don't go as far as to compare with rubber soles. Comparisons with rubber soles usually also use platform pedals and so combine any penalty of rubber soles with those of platform pedals. It's probably been a long time since anyone seriously considered whether cycling shoes with clip pedals were at any disadvantage to clipless, but for the vintage bike that gets ridden, it's a question that still matters over the long-haul.
Likes For greatbasin:
#2
Senior Member
As long as you can pull up off the downstroke with some kind of foot retention then I would think the differences are negligible in spd vs clips.
Wearing better fitting clothing or changing your position to be more aerodynamic is probably an easier way to save watts.
Wearing better fitting clothing or changing your position to be more aerodynamic is probably an easier way to save watts.
#3
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,796
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1392 Post(s)
Liked 1,324 Times
in
836 Posts
I have used toeclips since 1968 and have no plans or desire to change. I keep them just loose enough to enable me to jerk either foot straight back and out when desired or needed.
What really impacts my power output is seat height / leg extension. I got on the Bianchi on Sunday morning and unremarkably felt like Superman compared to my performance on the mountain bike, but only about half of the difference was attributable to differences in tire width and bike weight. The rest resulted from my seat post having gradually slipped downward by about 3 cm or so on the mountain bike. Raising the saddle on the mountain bike let me push a higher gear and climb far better than I had been.
What really impacts my power output is seat height / leg extension. I got on the Bianchi on Sunday morning and unremarkably felt like Superman compared to my performance on the mountain bike, but only about half of the difference was attributable to differences in tire width and bike weight. The rest resulted from my seat post having gradually slipped downward by about 3 cm or so on the mountain bike. Raising the saddle on the mountain bike let me push a higher gear and climb far better than I had been.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#4
Happy With My Bikes
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,186
Bikes: Hi-Ten bike boomers, a Trek Domane and some projects
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 884 Post(s)
Liked 2,307 Times
in
1,117 Posts
My experience is purely unscientific. But when I bought a modern bike a few years ago I had never rode clipless, did not have the shoes for them and didn't see the point for my casual riding. The guy at the LBS I bought it from just gave me a pair of cheap Wellgo pedals with cheap plastic cages and nylon straps. However after a few weeks, I noticed that the black finish was wearing off of my crank arms and I was wearing through the rubber holder for my cadence sensor magnet. That was evidence my feet were all over the place. I made the switch to SPDs and I can't honestly say I remember the actual numbers, but my cadence improved and I want to say there was a 2 mph improvement in average speed over routes I was riding. The only new issue was "hot spots" on my feet when I rode with a lot of climbing and those were coming from my SPD pedals. Once I switched to Look compatible pedals and cleats, that went away probably due to better distribution of force when pedaling.
One of these days as an experiment, I should try that with one of my vintage bikes. But I'm sure I wouldn't like the looks of modern pedals on them even though they are just old bike boom bikes.
One of these days as an experiment, I should try that with one of my vintage bikes. But I'm sure I wouldn't like the looks of modern pedals on them even though they are just old bike boom bikes.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
Last edited by Chuck M; 05-12-22 at 04:37 PM.
Likes For Chuck M:
#5
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
Forms of clipless pedals, suchs as SPD, have no performance advantage over traditional cycling shoes with cleats. The advantages are primarily comfort, safety and injury prevention. Most early clipless adopters remarked on the increased comfort of not having their feet encased in a tightly cinched strap. From a safety perspective, clipless offers quicker and hands-free release. Finally. most traditional cycling shoes have fixed cleats, while most clipless systems allow some float. An improperly positioned fixed cleat can lead to injury (generally associated with the kness), while floating cleats greatly reduce this probability.
Few cyclists, actually pull on the upstoke, including professionals. It's more a case of unweighting the foot on the upstroke. That can be achieved with any shoe. Cleated shoes do however have a performance advantage in driving the cranks through the top and bottom of the pedal stroke.
BTW, did anybody see Jeopardy a few nights ago, where the clue contained SPDs? The host, Ken Jennings, pronounced it as ess-pee-deee-ess instead of ess-pee-dees. He may be knowledgeable but he isn't bicycle savy.
Few cyclists, actually pull on the upstoke, including professionals. It's more a case of unweighting the foot on the upstroke. That can be achieved with any shoe. Cleated shoes do however have a performance advantage in driving the cranks through the top and bottom of the pedal stroke.
BTW, did anybody see Jeopardy a few nights ago, where the clue contained SPDs? The host, Ken Jennings, pronounced it as ess-pee-deee-ess instead of ess-pee-dees. He may be knowledgeable but he isn't bicycle savy.
Last edited by T-Mar; 05-12-22 at 04:37 PM.
#6
2k miles from the midwest
Join Date: Feb 2005
Location: Washington
Posts: 1,964
Bikes: ~'75 Colin Laing, '80s Schwinn SuperSport 650b, ex-Backroads ti project...
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 525 Post(s)
Liked 931 Times
in
446 Posts
If you're not going for a PR, does it matter?
I rode exclusively on eggbeaters since they came out in '02 until a few years ago after a hip injury. (The reason I stopped wasn't float, it was the shock of unclipping that spring echoing through my leg...) Since then I've been riding just clips/straps, even on the occasional fixie day and soft-soled casual shoes (Chucks or Vans). If' you already have a decent spin and aren't going out to hammer competitively, the soft sole keeps you for over exerting and the clips/straps don't need to be cinched tight.
I rode exclusively on eggbeaters since they came out in '02 until a few years ago after a hip injury. (The reason I stopped wasn't float, it was the shock of unclipping that spring echoing through my leg...) Since then I've been riding just clips/straps, even on the occasional fixie day and soft-soled casual shoes (Chucks or Vans). If' you already have a decent spin and aren't going out to hammer competitively, the soft sole keeps you for over exerting and the clips/straps don't need to be cinched tight.
#7
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,634
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,795 Times
in
2,281 Posts
Prior to clipless pedals, toeclips and straps would often make my foot fall asleep, especially on colder days. Once I went clipless, these issues went away. I'm pretty sure that I could do just fine with platform pedals, but I feel addicted to clipless. Eroica/Cino rides are the only times I use toeclips and straps. I keep the straps very, very loose on those rides as I'm not confident I can pull out quickly if needed.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#8
Full Member
Join Date: Jul 2016
Location: Denver CO
Posts: 233
Bikes: 2014 Fuji Cross 2.0 LE, 1993 Santana Vision, 1993 Specialized Allez Pro, 1993 Trek 930, 1985 Panasonic DX3000
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 74 Times
in
55 Posts
I find clipless pedals to be much more convenient. Getting in and out is always the hassle for me. I run Clips on my Panasonic, and clipless on the rest. I find it more nostalgic and taking me back in time, but it can be a pain. I know, with practice comes perfection...but...
Likes For kermie:
#9
Senior Member
Join Date: Nov 2015
Location: Dublin, Ireland
Posts: 1,268
Bikes: Bianchi Ti Megatube; Colnago Competition; Planet-X EC-130E; Klein Pulse; Amp Research B4; Litespeed Catalyst; Trek Y11
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 605 Post(s)
Liked 480 Times
in
260 Posts
Are you shaving your arms and legs too? 70secs over 40kms...
Depends on what you want. I like clipless pedals and always hated toe straps. I also like shaving my legs, it just feels great.
If you're racing, it only makes sense to do everything the top racers are doing, get the advantage of all the R&D they've done to achieve the best times in the most efficient ways.
Depends on what you want. I like clipless pedals and always hated toe straps. I also like shaving my legs, it just feels great.
If you're racing, it only makes sense to do everything the top racers are doing, get the advantage of all the R&D they've done to achieve the best times in the most efficient ways.
#10
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,902
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4802 Post(s)
Liked 3,922 Times
in
2,551 Posts
My experience - my first cycling performance breakthrough was toeclips and straps. Big. Pulling the straps tight. Bigger. A few years later, cycling shoes and cleats. Another big jump. I raced that combo back when that's what everybody did. Loved it. Pulled performances that I didn't think were possible for this body.
During that time, I encountered knee issues. (Fallout from a very serious injury, rapid work to get back into racing form, breaking a bunch of "rules" surrounding that knee condition and probably genetics and luck; not the pedals.) Over the following years I came to realize that the cleat which locked my feet in place were a gift for my knees.
Clipless came along. I stayed away until a salesman told me about the black LOOK cleats that lock out float. Got on board. And you know what? My performances with clipless are exactly what I saw with toeclips, straps, cycling shoes and cleats; all but the decidedly different starts and stops. I use the same model shoes, just different cleats for the two. And forget which system I am on. Sometimes it's "oh yeah, I'm riding fix gear. Gotta remember those straps! Sometimes I forget and gracefully fall over.
I talk of cycling shoes. I also used a leather moccasin style shoe with a thick rubber sole reinforced with a steel shank. Soft leather so toestraps pulled tight gripped them well. Soles wore to a cleat-like groove. (I rode up both sides of Seattle's N 65th St to Aurora on my 42-17 fix gear with that combo a few times.) The shoes I hate to ride in are soft soled running shoes and the like. I find them completely inferior to cycling shoes, those moccasin shoes (which I wish were still around) and nearly all men's dress shoes. (Slippery leather soles can be an issue and they do not stay "dress" if I'm riding them but they suit the ride well. I can easily imagine adding cleats and being quite happy.
I haven't directly answered your question but I'm guessing you can find something here that helps. If you do want to try cleats - the old (now discontinued?) Exustar aluminum track cleats (~$34 not the far more expensive ones that are for the velodrome only) are very good cleats. The issue is that they use the 3-bolt LOOK pattern so you need shoes compatible with those. SPD shoes are not compatible (but a lot of the Lake shoes have bolts for both; the cheap Lakes work very well for my feet).
I hope Exustar brings those aluminum slotted cleats back or someone else copies them. (I've been buying them since ~2000. Any patents should have expired by now.)
During that time, I encountered knee issues. (Fallout from a very serious injury, rapid work to get back into racing form, breaking a bunch of "rules" surrounding that knee condition and probably genetics and luck; not the pedals.) Over the following years I came to realize that the cleat which locked my feet in place were a gift for my knees.
Clipless came along. I stayed away until a salesman told me about the black LOOK cleats that lock out float. Got on board. And you know what? My performances with clipless are exactly what I saw with toeclips, straps, cycling shoes and cleats; all but the decidedly different starts and stops. I use the same model shoes, just different cleats for the two. And forget which system I am on. Sometimes it's "oh yeah, I'm riding fix gear. Gotta remember those straps! Sometimes I forget and gracefully fall over.
I talk of cycling shoes. I also used a leather moccasin style shoe with a thick rubber sole reinforced with a steel shank. Soft leather so toestraps pulled tight gripped them well. Soles wore to a cleat-like groove. (I rode up both sides of Seattle's N 65th St to Aurora on my 42-17 fix gear with that combo a few times.) The shoes I hate to ride in are soft soled running shoes and the like. I find them completely inferior to cycling shoes, those moccasin shoes (which I wish were still around) and nearly all men's dress shoes. (Slippery leather soles can be an issue and they do not stay "dress" if I'm riding them but they suit the ride well. I can easily imagine adding cleats and being quite happy.
I haven't directly answered your question but I'm guessing you can find something here that helps. If you do want to try cleats - the old (now discontinued?) Exustar aluminum track cleats (~$34 not the far more expensive ones that are for the velodrome only) are very good cleats. The issue is that they use the 3-bolt LOOK pattern so you need shoes compatible with those. SPD shoes are not compatible (but a lot of the Lake shoes have bolts for both; the cheap Lakes work very well for my feet).
I hope Exustar brings those aluminum slotted cleats back or someone else copies them. (I've been buying them since ~2000. Any patents should have expired by now.)
#11
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,475
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,373 Times
in
1,579 Posts
I currently use SPD's as well as clips & straps. With the clips & straps, I use both shoes with rigid soles and slotted cleats as well as "touring" style shoes with stiff rubber soles.
In all of these, the stiffness is important for comfort. Any flex that produces local pressure points on the feet is a bad thing.
The use of cleats, either SPD or older slotted cleats, provides the ability to generate force over more of the pedal circle. Whether or not that is important is a personal choice.
A quick photo of one of pairs of shoes with slotted cleats that I routinely wear. In fact, I just rode these on a 68 mile ride today...
Steve in Peoria
In all of these, the stiffness is important for comfort. Any flex that produces local pressure points on the feet is a bad thing.
The use of cleats, either SPD or older slotted cleats, provides the ability to generate force over more of the pedal circle. Whether or not that is important is a personal choice.
A quick photo of one of pairs of shoes with slotted cleats that I routinely wear. In fact, I just rode these on a 68 mile ride today...
Steve in Peoria
#12
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
I am by no means a expert but have used both. I really much prefer the SPD because of the safety factor. No reaching down to snug up and instant release when instant release is needed. I also feel that they offer more positive power transmission but that is just me. Put another way, nothing on Earth would ever get me to put my feet into traps and rats again as long as I live. I use SPD mountain bike shoes with recessed cleats and love them. Just got a new set after wearing my other set out after thousands of miles of use riding and, sadly walking while carrying the bike, now and again.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#13
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,828 Times
in
1,995 Posts
Cleats! Use cleats, safer.
#14
Full Member
Join Date: Aug 2019
Location: Albuquerque
Posts: 227
Bikes: 1st Track bike: 1978 Speedwell titanium 1st Road bike: 2001 Independent Fabrication Crown Jewel
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked 116 Times
in
65 Posts
Cool set-up but how do you keep the metal cages from digging into the tops of your leather shoes?
Before I moved to SPD system, I used my leather cycling shoes with cages and the tops were soon shredded.
Before I moved to SPD system, I used my leather cycling shoes with cages and the tops were soon shredded.
I currently use SPD's as well as clips & straps. With the clips & straps, I use both shoes with rigid soles and slotted cleats as well as "touring" style shoes with stiff rubber soles.
In all of these, the stiffness is important for comfort. Any flex that produces local pressure points on the feet is a bad thing.
The use of cleats, either SPD or older slotted cleats, provides the ability to generate force over more of the pedal circle. Whether or not that is important is a personal choice.
A quick photo of one of pairs of shoes with slotted cleats that I routinely wear. In fact, I just rode these on a 68 mile ride today...
Steve in Peoria
In all of these, the stiffness is important for comfort. Any flex that produces local pressure points on the feet is a bad thing.
The use of cleats, either SPD or older slotted cleats, provides the ability to generate force over more of the pedal circle. Whether or not that is important is a personal choice.
A quick photo of one of pairs of shoes with slotted cleats that I routinely wear. In fact, I just rode these on a 68 mile ride today...
Steve in Peoria
#15
Full Member
Join Date: Mar 2017
Location: Arnhem NL
Posts: 229
Bikes: Might as well, now that I am here...
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 78 Times
in
66 Posts
Dylan has something to say :-)
Then again, when doing a triathlon I go SPD otherwise I'm likely to go flat.
#16
Senior Member
Join Date: Jan 2016
Posts: 3,446
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 874 Post(s)
Liked 2,286 Times
in
1,278 Posts
Traps and straps for me ! I am not a power rider , although I still push my self to get the most out of my rides. I leave my straps loose enough to slip in and out without fussing with them like I used to when I was young and faster. I have never used those new fangled options so I can’t comment on which is better, I just don’t feel like changing at this point .
#17
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,186
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 472 Post(s)
Liked 1,028 Times
in
404 Posts
Traps and straps for me ! I am not a power rider , although I still push my self to get the most out of my rides. I leave my straps loose enough to slip in and out without fussing with them like I used to when I was young and faster. I have never used those new fangled options so I can’t comment on which is better, I just don’t feel like changing at this point .
No, the cages never tear the tops of my shoes apart. Never heard of that. No never used cleats. I ride for fun and cardio at my pace of the day. Rather go further than faster.
#18
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
If you're talikng about the strap mounting loop on the instep, then the cleats should hold the shoes in a stable enough position that there should little, if any, movement between the shoe and toe clip. However, shoe damage in this are can reduced by fabricating a buffer between the shoe and toe clip. Cut a couple of slits in it, so that the toe strap can be fed through it, to hold it in place. You can use leatrher or any other suitable material. I made mine from old, thin, foam insoles. They may also ease some discomfort.
Likes For T-Mar:
#19
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,475
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,373 Times
in
1,579 Posts
On my bikes with low bottom brackets, this second scenario happens to me now and then.
Steve in Peoria
#20
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,355
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6215 Post(s)
Liked 4,213 Times
in
2,362 Posts
Old fart here who dumped toe clips when he was a young fart. I started using Look road pedals in the late 80s and both Shimano and Onza pedals in the early 90s. I won’t use road clipless pedals…the cleat is too hard to walk in and there is no advantage to them…but double sided mountain bike clipless pedals are far superior to toe clips. Trying to flip a pedal while riding up a rocky trail was nearly impossible and the toeclips catching on the rocks was a hazard.
As to the power advantage and the whole “people don’t pull up on the pedals” issue, try riding up that same rocky trail without being attached to the pedal. You’ll soon find that you do pull up on hard effort and being clipped into clipless is advantageous.
As to the power advantage and the whole “people don’t pull up on the pedals” issue, try riding up that same rocky trail without being attached to the pedal. You’ll soon find that you do pull up on hard effort and being clipped into clipless is advantageous.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#21
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,113
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 853 Post(s)
Liked 1,433 Times
in
815 Posts
My experience is that it is not really a matter of gaining or losing some kind of advantage, other than what works best for you and the style of riding you are doing. I still have and use flat, spd and spd-sl and like all of them on the bikes they are on. I also have 2 bikes with one side spd and the other flat. Lately, I have been going to mostly spd simply for the reason I get off the bike more often and take more steps than I used to. I absolutely prefer spd pedals with both sides spd. I find the spd/flat dual side, while not really hard, sometimes I miss getting the spd side flipped up with the toe of the shoe.
#22
Banned.
Join Date: Jan 2022
Posts: 1,070
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 359 Post(s)
Liked 582 Times
in
336 Posts
There has been a lot of research done. I'm not sure I agree with any of it, or all of it, some of it or naught.
I can say, after doing triathlons with toe clips and straps on running shoes, that the combination sucked for me. It hurt and I sure didn't feel faster.
I can say, after watching a certain BF member ride Dairyland Dare on a 2-sp 1933 bike while wearing Vanns (I think) that I don't see a huge advantage in clipless, either.
I can say, after watching my former road champion friend fall against a curb and get 17 staples in his head, that multiple straps can be a hazard to get out of.
I can say, after running two spokes into my own leg from the front wheel, that remaining strapped in during a front-ender may not be the best idea.
I can say, after falling over several times onto other people, that even clipless can be difficult if your left leg doesn't work as well as it should.
I've watched dozens of young guys in tennis shoes climb very well on 23-lb Surly Long Haul Truckers, because, well, who would wear clipless on a bike with that name?
The best riders I know are messengers. They never clip in, on the job or not. There's that.
But everyone hadda have those original Looks.
I run Keo2Max or equivalents on everything.
Can't walk worth a lick at rest stops.
Dogma is what dogma does.
Last edited by bamboobike4; 05-13-22 at 09:48 AM.
Likes For bamboobike4:
#23
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,820 Times
in
1,540 Posts
my 2 cents, worth just about that
I use all spd, spd-sl clipless and to a much lesser amount clips and straps.
I find the common advantage to all 3 is that my food is positioned correctly on the pedal and no energy is spent adjusting position
IMHO the shoe you are wearing makes more difference that the clip or clipless systems, you get more efficiency from a stiff sole than a soft tennis shoe
I like clipless, it is for me, convenient, use use clip on my Cino/ Eroica bike
I use spd for commuting, as it is the easiest to get in and out of multiple times
I use spd-sl for long rides, training (I tell my self it is training) as it feels more efficient and spreads pressure out
I use all spd, spd-sl clipless and to a much lesser amount clips and straps.
I find the common advantage to all 3 is that my food is positioned correctly on the pedal and no energy is spent adjusting position
IMHO the shoe you are wearing makes more difference that the clip or clipless systems, you get more efficiency from a stiff sole than a soft tennis shoe
I like clipless, it is for me, convenient, use use clip on my Cino/ Eroica bike
I use spd for commuting, as it is the easiest to get in and out of multiple times
I use spd-sl for long rides, training (I tell my self it is training) as it feels more efficient and spreads pressure out
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#24
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,634
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,795 Times
in
2,281 Posts
Good point. 99.99% of the time I don't pull up, but when it's needed, that extra bit of power can make the difference between walking and riding. More significantly, on bumpy roads (paved or otherwise) clips or clipless pedals keep your foot from falling off the pedal.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#25
Senior Member
I use clips and straps. I no longer use cleats. The straps are cinched down but not uber-tightly.
Stiff-soled shoes really help - clipped or clipless.
Clips damage the tips/toes of your shoes - metal on leather. C'est la vie. I wear mine as a badge of honor. It's not a beauty contest.
Stiff-soled shoes really help - clipped or clipless.
Clips damage the tips/toes of your shoes - metal on leather. C'est la vie. I wear mine as a badge of honor. It's not a beauty contest.