The frame doesn't fit pass-around game
02-28-22, 03:10 PM
#2051
Senior Member
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 3,984
Bikes: TRIMMED DOWN THE HERD
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1090 Post(s)
Liked 935 Times
in
600 Posts
Hello everyone,
I hope this is allowed. I have some frames that I don't fit and no longer have the time or resources to work on, so I'd like to give them to BF members before I take them to the bike co-op within a week or so. One is a ctc 55cm Daccordi Griffo with most of the braze-ons filed off and a missing bottle cage boss. It's a bit of a project, but if you think you can handle, you can take it. Fork is included. The second frame is a what I believe to be a 1983 Miyata 1000, size 56cm ctc. The frame is cosmetically challenged, but the are no structural compromises like dents or severe rust. The one real caveat is that bottom bracket is that proprietary Suntour unit that requires a special tool to remove; the PO couldn't remove it and neither can I. Otherwise, it's a decent project.
At this point I would like to give it to someone who is local within the Bay Area, but if you are not located here I am sure we can work something out with the facilitators. If you would like more information or photos on the frames let me know and I will try to answer them to the best of my abilities in a timely manner.
Thanks for your time,
Philpeugeot
I hope this is allowed. I have some frames that I don't fit and no longer have the time or resources to work on, so I'd like to give them to BF members before I take them to the bike co-op within a week or so. One is a ctc 55cm Daccordi Griffo with most of the braze-ons filed off and a missing bottle cage boss. It's a bit of a project, but if you think you can handle, you can take it. Fork is included. The second frame is a what I believe to be a 1983 Miyata 1000, size 56cm ctc. The frame is cosmetically challenged, but the are no structural compromises like dents or severe rust. The one real caveat is that bottom bracket is that proprietary Suntour unit that requires a special tool to remove; the PO couldn't remove it and neither can I. Otherwise, it's a decent project.
At this point I would like to give it to someone who is local within the Bay Area, but if you are not located here I am sure we can work something out with the facilitators. If you would like more information or photos on the frames let me know and I will try to answer them to the best of my abilities in a timely manner.
Thanks for your time,
Philpeugeot
02-28-22, 03:55 PM
#2052
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,768
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 3,105 Times
in
1,955 Posts
Likes For jdawginsc:
02-28-22, 06:41 PM
#2053
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,430
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 565 Post(s)
Liked 1,040 Times
in
539 Posts
Hello everyone,
I hope this is allowed. I have some frames that I don't fit and no longer have the time or resources to work on, so I'd like to give them to BF members before I take them to the bike co-op within a week or so. One is a ctc 55cm Daccordi Griffo with most of the braze-ons filed off and a missing bottle cage boss. It's a bit of a project, but if you think you can handle, you can take it. Fork is included. The second frame is a what I believe to be a 1983 Miyata 1000, size 56cm ctc. The frame is cosmetically challenged, but the are no structural compromises like dents or severe rust. The one real caveat is that bottom bracket is that proprietary Suntour unit that requires a special tool to remove; the PO couldn't remove it and neither can I. Otherwise, it's a decent project.
At this point I would like to give it to someone who is local within the Bay Area, but if you are not located here I am sure we can work something out with the facilitators. If you would like more information or photos on the frames let me know and I will try to answer them to the best of my abilities in a timely manner.
Thanks for your time,
Philpeugeot
I hope this is allowed. I have some frames that I don't fit and no longer have the time or resources to work on, so I'd like to give them to BF members before I take them to the bike co-op within a week or so. One is a ctc 55cm Daccordi Griffo with most of the braze-ons filed off and a missing bottle cage boss. It's a bit of a project, but if you think you can handle, you can take it. Fork is included. The second frame is a what I believe to be a 1983 Miyata 1000, size 56cm ctc. The frame is cosmetically challenged, but the are no structural compromises like dents or severe rust. The one real caveat is that bottom bracket is that proprietary Suntour unit that requires a special tool to remove; the PO couldn't remove it and neither can I. Otherwise, it's a decent project.
At this point I would like to give it to someone who is local within the Bay Area, but if you are not located here I am sure we can work something out with the facilitators. If you would like more information or photos on the frames let me know and I will try to answer them to the best of my abilities in a timely manner.
Thanks for your time,
Philpeugeot
02-28-22, 10:26 PM
#2054
Full Member
Join Date: Aug 2017
Location: San Mateo, CA
Posts: 252
Bikes: Bike Friday PRP, Bike Friday NWT, Bromton M6R, 1991 Miyata 914, 1991 Miyata 1000, 1986 Raleigh Portage, many more frames
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 346 Times
in
181 Posts
Hello everyone,
I hope this is allowed. I have some frames that I don't fit and no longer have the time or resources to work on, so I'd like to give them to BF members before I take them to the bike co-op within a week or so. One is a ctc 55cm Daccordi Griffo with most of the braze-ons filed off and a missing bottle cage boss. It's a bit of a project, but if you think you can handle, you can take it. Fork is included. The second frame is a what I believe to be a 1983 Miyata 1000, size 56cm ctc. The frame is cosmetically challenged, but the are no structural compromises like dents or severe rust. The one real caveat is that bottom bracket is that proprietary Suntour unit that requires a special tool to remove; the PO couldn't remove it and neither can I. Otherwise, it's a decent project.
At this point I would like to give it to someone who is local within the Bay Area, but if you are not located here I am sure we can work something out with the facilitators. If you would like more information or photos on the frames let me know and I will try to answer them to the best of my abilities in a timely manner.
Thanks for your time,
Philpeugeot
I hope this is allowed. I have some frames that I don't fit and no longer have the time or resources to work on, so I'd like to give them to BF members before I take them to the bike co-op within a week or so. One is a ctc 55cm Daccordi Griffo with most of the braze-ons filed off and a missing bottle cage boss. It's a bit of a project, but if you think you can handle, you can take it. Fork is included. The second frame is a what I believe to be a 1983 Miyata 1000, size 56cm ctc. The frame is cosmetically challenged, but the are no structural compromises like dents or severe rust. The one real caveat is that bottom bracket is that proprietary Suntour unit that requires a special tool to remove; the PO couldn't remove it and neither can I. Otherwise, it's a decent project.
At this point I would like to give it to someone who is local within the Bay Area, but if you are not located here I am sure we can work something out with the facilitators. If you would like more information or photos on the frames let me know and I will try to answer them to the best of my abilities in a timely manner.
Thanks for your time,
Philpeugeot
03-01-22, 01:25 PM
#2055
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,768
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 3,105 Times
in
1,955 Posts
It's actually better.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
03-01-22, 04:47 PM
#2056
Junior Member
wow I like that Daccordi
too bad the derailleur hanger was cut
and I am on the wrong coast
too bad the derailleur hanger was cut
and I am on the wrong coast
03-03-22, 12:45 AM
#2057
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
Maybe @73StellaSX76 or @SwimmerMike or @davester can help?
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
03-03-22, 08:48 AM
#2059
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,430
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 565 Post(s)
Liked 1,040 Times
in
539 Posts
Maybe @73StellaSX76 or @SwimmerMike or @davester can help?
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
03-03-22, 08:52 AM
#2060
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,768
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 3,105 Times
in
1,955 Posts
Maybe @73StellaSX76 or @SwimmerMike or @davester can help?
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
03-03-22, 08:59 AM
#2061
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,768
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 3,105 Times
in
1,955 Posts
Oops
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
03-03-22, 09:04 AM
#2062
Senior Member
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,430
Bikes: You had me at rusty and Italian!!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 565 Post(s)
Liked 1,040 Times
in
539 Posts
Thinking about it, if jdawginsc wants it, it’s all his. 56 cm is a touch too big for me and my 30” inseam.
03-03-22, 09:38 AM
#2063
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,533
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 929 Post(s)
Liked 1,289 Times
in
486 Posts
Maybe @73StellaSX76 or @SwimmerMike or @davester can help?
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
03-03-22, 09:58 AM
#2064
Full Member
Maybe @73StellaSX76 or @SwimmerMike or @davester can help?
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
03-03-22, 11:14 AM
#2065
Senior Member
Join Date: Aug 2020
Location: Saratoga, CA
Posts: 821
Bikes: 1981 Bianchi Specialissim, 1976 Colnago Super. 1971 Bob Jackson. 2012 Kestrel 4000. 2012 Willier. 2016 Fuji Cross 1.1
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 275 Post(s)
Liked 940 Times
in
387 Posts
Maybe @73StellaSX76 or @SwimmerMike or @davester can help?
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
I'd be willing to braze on a derailleur hanger for cheap and help with repairs. I can't stand seeing a perfectly good frame that just needs a bit of torchwork on it.
I can help. I was planning on being a stowaway on a 6 week sailing trip in Mexico, but I couldn't find the right boat ended up at the Farlons and swam back.
It might take a bit of time to get them shipped, but I can clear the frames from @philpeugeot quickly to remove any pressure on him.
@philpeugeot We can connect on how to get the frames to me. I'm thinking if you are doing the Saturday ride, I can throw a rack on my car drive you home and grab the frames. PM me and we can close.
I haven't followed the thread so I don't know who is getting what, and it also sounds like the shipping might be to @gugie on one of them. We can close through PMs, if we want to use a LBS I can help arrange. If I'm shipping will need to work the details.
Mike
03-03-22, 02:26 PM
#2066
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,768
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 3,105 Times
in
1,955 Posts
All -
I can help. I was planning on being a stowaway on a 6 week sailing trip in Mexico, but I couldn't find the right boat ended up at the Farlons and swam back.
It might take a bit of time to get them shipped, but I can clear the frames from @philpeugeot quickly to remove any pressure on him.
@philpeugeot We can connect on how to get the frames to me. I'm thinking if you are doing the Saturday ride, I can throw a rack on my car drive you home and grab the frames. PM me and we can close.
I haven't followed the thread so I don't know who is getting what, and it also sounds like the shipping might be to @gugie on one of them. We can close through PMs, if we want to use a LBS I can help arrange. If I'm shipping will need to work the details.
Mike
I can help. I was planning on being a stowaway on a 6 week sailing trip in Mexico, but I couldn't find the right boat ended up at the Farlons and swam back.
It might take a bit of time to get them shipped, but I can clear the frames from @philpeugeot quickly to remove any pressure on him.
@philpeugeot We can connect on how to get the frames to me. I'm thinking if you are doing the Saturday ride, I can throw a rack on my car drive you home and grab the frames. PM me and we can close.
I haven't followed the thread so I don't know who is getting what, and it also sounds like the shipping might be to @gugie on one of them. We can close through PMs, if we want to use a LBS I can help arrange. If I'm shipping will need to work the details.
Mike
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
03-03-22, 09:24 PM
#2067
Full Member
Join Date: Aug 2017
Location: San Mateo, CA
Posts: 252
Bikes: Bike Friday PRP, Bike Friday NWT, Bromton M6R, 1991 Miyata 914, 1991 Miyata 1000, 1986 Raleigh Portage, many more frames
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 346 Times
in
181 Posts
All -
I can help. I was planning on being a stowaway on a 6 week sailing trip in Mexico, but I couldn't find the right boat ended up at the Farlons and swam back.
It might take a bit of time to get them shipped, but I can clear the frames from @philpeugeot quickly to remove any pressure on him.
@philpeugeot We can connect on how to get the frames to me. I'm thinking if you are doing the Saturday ride, I can throw a rack on my car drive you home and grab the frames. PM me and we can close.
I haven't followed the thread so I don't know who is getting what, and it also sounds like the shipping might be to @gugie on one of them. We can close through PMs, if we want to use a LBS I can help arrange. If I'm shipping will need to work the details.
Mike
I can help. I was planning on being a stowaway on a 6 week sailing trip in Mexico, but I couldn't find the right boat ended up at the Farlons and swam back.
It might take a bit of time to get them shipped, but I can clear the frames from @philpeugeot quickly to remove any pressure on him.
@philpeugeot We can connect on how to get the frames to me. I'm thinking if you are doing the Saturday ride, I can throw a rack on my car drive you home and grab the frames. PM me and we can close.
I haven't followed the thread so I don't know who is getting what, and it also sounds like the shipping might be to @gugie on one of them. We can close through PMs, if we want to use a LBS I can help arrange. If I'm shipping will need to work the details.
Mike
03-04-22, 08:25 PM
#2068
Senior Member
Join Date: Oct 2009
Posts: 1,100
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 287 Post(s)
Liked 327 Times
in
158 Posts
APB: I've decided that my paltry mechanical skills just aren't up to the challenge philpeugeot's Miyata frameset above. For the love of Pete someone take it, build it up and post some pics so we can drool over them! And a BIG thanks to philpeugeot and SwimmerMike for putting this sweet project in play!
03-05-22, 10:23 AM
#2069
Senior Member
Join Date: Aug 2020
Location: Saratoga, CA
Posts: 821
Bikes: 1981 Bianchi Specialissim, 1976 Colnago Super. 1971 Bob Jackson. 2012 Kestrel 4000. 2012 Willier. 2016 Fuji Cross 1.1
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 275 Post(s)
Liked 940 Times
in
387 Posts
There is now a new recipient of the Miyata. We’re closing details through PM. So it looks like both bikes are landing in new homes and will have a new life.
Likes For SwimmerMike:
03-06-22, 06:19 PM
#2070
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,768
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 3,105 Times
in
1,955 Posts
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
03-08-22, 10:29 PM
#2072
Junior Member
"The administrator has restricted use of the private message system to members with less than 10 posts." Sorry cannot reply, cannot send pics yet.
