Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Bike size from the picture?

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Bike size from the picture?

Old 09-20-22, 03:25 PM
  #1  
sbuckaroo
Junior Member
Thread Starter
 
Join Date: Jul 2015
Location: Maryland
Posts: 77
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 6 Times in 4 Posts
Bike size from the picture?

Folks,

I see messages where people post a picture of a bike (especially vintage) and others manage to figure out the bike size just from looking at the picture. How do y'all do that? Thx.
sbuckaroo is offline  
Likes For sbuckaroo:
Old 09-20-22, 04:17 PM
  #2  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
Magic 8 ball.
cxwrench is offline  
Likes For cxwrench:
Old 09-20-22, 04:37 PM
  #3  
genejockey 
Klaatu..Verata..Necktie?
 
genejockey's Avatar
 
Join Date: May 2007
Location: SF Bay Area
Posts: 17,658

Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace

Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10245 Post(s)
Liked 11,599 Times in 5,945 Posts
Originally Posted by sbuckaroo
Folks,

I see messages where people post a picture of a bike (especially vintage) and others manage to figure out the bike size just from looking at the picture. How do y'all do that? Thx.
Head tube length and seat stay/seat tube angle.
__________________
"Don't take life so serious-it ain't nohow permanent."

"Everybody's gotta be somewhere." - Eccles
genejockey is offline  
Likes For genejockey:
Old 09-20-22, 04:41 PM
  #4  
Broctoon
Super-duper Genius
 
Broctoon's Avatar
 
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,713
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 768 Post(s)
Liked 983 Times in 508 Posts
Lots of experience with bikes helps you develop an eye for it. One thing you can notice is the space between the top tube and down tube on the head tube. With traditional geometry (horizontal top tube) this dimension helps you get a pretty close guess at the frame’s size. It gets trickier with endurance frames that have a sloping top tube. If you know the approximate wheel size, this too can help with approximating the frame size just by looking at a picture.
Broctoon is offline  
Likes For Broctoon:
Old 09-20-22, 05:02 PM
  #5  
sbuckaroo
Junior Member
Thread Starter
 
Join Date: Jul 2015
Location: Maryland
Posts: 77
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 6 Times in 4 Posts
I see. It must be somewhat difficult to eyeball, but I guess it comes with experience. Thanks for your response.

Originally Posted by genejockey
Head tube length and seat stay/seat tube angle.
sbuckaroo is offline  
Old 09-20-22, 05:32 PM
  #6  
genejockey 
Klaatu..Verata..Necktie?
 
genejockey's Avatar
 
Join Date: May 2007
Location: SF Bay Area
Posts: 17,658

Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace

Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10245 Post(s)
Liked 11,599 Times in 5,945 Posts
Originally Posted by sbuckaroo
I see. It must be somewhat difficult to eyeball, but I guess it comes with experience. Thanks for your response.
That's it. BUT, you can gain a lot of experience quickly, by, for example, looking at bike frames on Ebay.
__________________
"Don't take life so serious-it ain't nohow permanent."

"Everybody's gotta be somewhere." - Eccles
genejockey is offline  
Likes For genejockey:
Old 09-20-22, 06:46 PM
  #7  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,772

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1935 Post(s)
Liked 2,150 Times in 1,313 Posts
Originally Posted by genejockey
Head tube length and seat stay/seat tube angle.
Bikes sizes are traditionally measured “from” the center of the bottom bracket. The “where” has differed from center of top tube or top of top tube; with some using top of seat tube.

I use the top and downtube attachment distance at the headtube.

An overly simplistic explanation for a vintage bike that has a horizontal top tube, is, as the size gets smaller, the top tube has to be closer to the bottom bracket and by default that brings it closer to the downtube and closer together at the head tube. The head tube generally gets shorter as sizes get smaller.

It is a bit tricky trying to figure a 54cm and 56cm, or 60cm and 62cm from just a picture, but it becomes more obvious when the sizes are further apart. 50cm vs. 60cm is a slam dunk.

John
70sSanO is offline  
Likes For 70sSanO:
Old 09-20-22, 08:58 PM
  #8  
Ironfish653
Dirty Heathen
 
Ironfish653's Avatar
 
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,188

Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 889 Post(s)
Liked 906 Times in 534 Posts
Also, if you have a particular brand or era you're looking for, like "Pre- TREK" era Klein bikes or Cannondale ST's, for example; you can do some research (FB owners' groups are a good place) to find out if they have any sizing idiosyncrasies (run big, run small, etc)
Road bikes usually are fairly close to size, but MTBs, especially early ones can vary wildly from brand to brand
Ironfish653 is offline  
Likes For Ironfish653:
Old 09-20-22, 10:12 PM
  #9  
urbanknight
Over the hill
 
urbanknight's Avatar
 
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,340

Bikes: Giant Defy, Giant Revolt

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 1,186 Times in 681 Posts
Back in the steel frame traditional geometry era, I was fairly good at guessing size by sight. Compact geometry and wildly varied tubing thickness gives me no clue.
__________________
It's like riding a bicycle
urbanknight is offline  
Likes For urbanknight:
Old 09-21-22, 05:24 AM
  #10  
noimagination
Senior Member
 
Join Date: Oct 2016
Posts: 719
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 362 Post(s)
Liked 414 Times in 244 Posts
There's this really cool invention that will make it completely unnecessary for you to post a picture and ask others to figure out the size of your bike. I'm not sure you've heard of it, it's called: a tape measure.
noimagination is offline  
Old 09-21-22, 08:43 AM
  #11  
icemilkcoffee 
Senior Member
 
icemilkcoffee's Avatar
 
Join Date: Aug 2009
Posts: 2,592
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1541 Post(s)
Liked 1,700 Times in 955 Posts
I am surprised that in the era of 'there's an app for that', there is no app that will help you eyeball a bike's size from a picture. It can key off of the wheel size, which is typically fixed at 700c, and then extrapolate the frame size from that.
icemilkcoffee is online now  
Old 09-21-22, 10:07 AM
  #12  
genejockey 
Klaatu..Verata..Necktie?
 
genejockey's Avatar
 
Join Date: May 2007
Location: SF Bay Area
Posts: 17,658

Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace

Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10245 Post(s)
Liked 11,599 Times in 5,945 Posts
Originally Posted by urbanknight
Back in the steel frame traditional geometry era, I was fairly good at guessing size by sight. Compact geometry and wildly varied tubing thickness gives me no clue.
This is very true. Once you get to oversize tubing, sloping top tubes, and dropped seat stays, guestimating size becomes much more difficult. But mostly I've been in the market for traditional steel frames. For example, last year I was looking for a Centurion Ironman in 57 cm, and a lot of the listings in Craigs List or FB Marketplace just say things like "Medium" or "Large", or the seller doesn't know how to measure, or doesn't say whether they measured C-T or C-C, and some measure the top tube instead of the seat tube. I got pretty good at spotting 58s based on the length of the head tube and where the pump peg was on the head tube in relation to the down tube.
__________________
"Don't take life so serious-it ain't nohow permanent."

"Everybody's gotta be somewhere." - Eccles
genejockey is offline  
Likes For genejockey:
Old 09-21-22, 10:20 AM
  #13  
seypat
Senior Member
 
Join Date: Oct 2010
Posts: 8,756
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3191 Post(s)
Liked 2,460 Times in 1,489 Posts
Steel frame era frames also might have a pump peg knob on the back of the head tube. Where it's positioned will tell you the right size or one off. Same with the head tube decal. You can compare different sizes and see where the decal is. Basically, your'e determining how much space is between the TT and DT.
seypat is online now  
Old 09-21-22, 07:58 PM
  #14  
urbanknight
Over the hill
 
urbanknight's Avatar
 
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,340

Bikes: Giant Defy, Giant Revolt

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 1,186 Times in 681 Posts
Originally Posted by noimagination
There's this really cool invention that will make it completely unnecessary for you to post a picture and ask others to figure out the size of your bike. I'm not sure you've heard of it, it's called: a tape measure.
Most of the time it's because the person is looking at an ad for said bike, quite often miles away from them, so they are unable to measure the bike manually.
__________________
It's like riding a bicycle
urbanknight is offline  
Likes For urbanknight:
Old 09-21-22, 08:58 PM
  #15  
easyupbug 
Senior Member
 
Join Date: Jan 2013
Posts: 2,652

Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 560 Post(s)
Liked 546 Times in 396 Posts
Well done Bike Forum only two out of more than a dozen responses to a newbie that are not condescending.
easyupbug is offline  
Likes For easyupbug:
Old 09-21-22, 09:32 PM
  #16  
urbanknight
Over the hill
 
urbanknight's Avatar
 
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,340

Bikes: Giant Defy, Giant Revolt

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 1,186 Times in 681 Posts
Originally Posted by easyupbug
Well done Bike Forum only two out of more than a dozen responses to a newbie that are not condescending.
Hmmm, I only see 2 posts that ARE condescending or sarcastic... 3 if you count yours.
__________________
It's like riding a bicycle
urbanknight is offline  
Likes For urbanknight:
Old 09-21-22, 10:56 PM
  #17  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18320 Post(s)
Liked 4,489 Times in 3,338 Posts
Originally Posted by genejockey
Head tube length and seat stay/seat tube angle.
Yep... with the horizontal top tube.

Measurements vary somewhat by things like brake reach and fork design. So a bike with fenders and a LOT of space for the tires will have a shorter head tube than a pure racing bike.

Nonetheless, if one is really only interested in sizes within a few cm, one can get close enough.
CliffordK is offline  
Likes For CliffordK:
Old 09-22-22, 07:27 AM
  #18  
c_m_shooter
Senior Member
 
c_m_shooter's Avatar
 
Join Date: Sep 2006
Location: Paradise, TX
Posts: 2,087

Bikes: Soma Pescadero, Surly Pugsley, Salsa Fargo, Schwinn Klunker, Gravity SS 27.5, Monocog 29er

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 186 Post(s)
Liked 234 Times in 166 Posts
Head tube length and top tube height compared to rear tire.
c_m_shooter is offline  
Old 09-22-22, 07:31 AM
  #19  
Paul Barnard
For The Fun of It
 
Paul Barnard's Avatar
 
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,844

Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2131 Post(s)
Liked 1,639 Times in 822 Posts
Head tube length is most often the easiest reference point. Generally, the greater the distance between the top tube and down tube intersection at the head tube, the larger the bike. With road bikes, the thing that is consistent from bike to bike is wheel size. The size of the frame relative to wheel size is also an indicator. Over time, you just develop an eye for it.
Paul Barnard is offline  
Old 09-22-22, 10:15 AM
  #20  
3alarmer 
Friendship is Magic
 
3alarmer's Avatar
 
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,932

Bikes: old ones

Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26249 Post(s)
Liked 10,231 Times in 7,100 Posts
.
...it's an inexact science, even with a tape measure. I once drove two hours one way, from here to Merced, to look at an old Paramount that I had asked the seller to measure, because I couldn't tell from the pictures. He was only off by two inches.
__________________
3alarmer is online now  
Old 09-22-22, 12:45 PM
  #21  
BillyD
Administrator
 
BillyD's Avatar
 
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 32,901

Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92

Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11894 Post(s)
Liked 6,489 Times in 3,417 Posts
Originally Posted by easyupbug
Well done Bike Forum only two out of more than a dozen responses to a newbie that are not condescending.
Ikr
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
BillyD is offline  
Old 09-22-22, 12:56 PM
  #22  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,058
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,295 Times in 7,229 Posts
Originally Posted by urbanknight
Hmmm, I only see 2 posts that ARE condescending or sarcastic... 3 if you count yours.
Yeah. I don't see much condescension or sarcasm here. That comment left me scratching my head.
indyfabz is offline  
Likes For indyfabz:
Old 09-22-22, 04:29 PM
  #23  
urbanknight
Over the hill
 
urbanknight's Avatar
 
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,340

Bikes: Giant Defy, Giant Revolt

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 1,186 Times in 681 Posts
Originally Posted by 3alarmer
.
...it's an inexact science, even with a tape measure. I once drove two hours one way, from here to Merced, to look at an old Paramount that I had asked the seller to measure, because I couldn't tell from the pictures. He was only off by two inches.
Yeah, I learned that the seller's tape measure is often less accurate than my guess based on a picture.
__________________
It's like riding a bicycle
urbanknight is offline  
Old 09-24-22, 07:46 AM
  #24  
bwilli88 
Not lost wanderer.
 
bwilli88's Avatar
 
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,359

Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 979 Times in 514 Posts
Eyecrometer. having looked at a lot of bikes gives one experience.
__________________
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
bwilli88 is online now  
Old 09-25-22, 09:09 AM
  #25  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,538

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10902 Post(s)
Liked 7,391 Times in 4,148 Posts
Originally Posted by BillyD
Ikr
idk
mstateglfr is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.