Tubeless long term storage?
#1
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 72
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 260 Times
in
89 Posts
Tubeless long term storage?
I'll be taking a bike to my daughters to leave there so I have something to ride when we visit. It could be as long as 6 months in between visits. What's the best way to deal with tubeless in that situation? I use Orange Seal Endurance and the bike will be stored in controlled conditions (70-75 degrees).
Do I need to unmount the tires and wash all the sealant out and refill each time, or can they sit that long with no bad stuff happening?
TIA
Do I need to unmount the tires and wash all the sealant out and refill each time, or can they sit that long with no bad stuff happening?
TIA
#3
Senior Member
Join Date: Sep 2020
Location: Scotland
Posts: 501
Bikes: Way too many
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 827 Post(s)
Liked 584 Times
in
345 Posts
If the bike is stored with the wheels off the ground, then giving them a spin every couple of weeks should be sufficient. That's how I keep mine fine over winter.
For no maintenance by daughter/others, then yeah the best option is probably to take the tires off, clean up the sealant and set them up fresh before use. But that way you risk rim damage from having bare rims or flat tires.
You could always just put tubes back in since it's a spare bike that's not getting used much, and save all of the hassle.
For no maintenance by daughter/others, then yeah the best option is probably to take the tires off, clean up the sealant and set them up fresh before use. But that way you risk rim damage from having bare rims or flat tires.
You could always just put tubes back in since it's a spare bike that's not getting used much, and save all of the hassle.
Likes For Herzlos:
#4
LR÷P=HR
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,137
Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 848 Post(s)
Liked 1,161 Times
in
671 Posts
Using Orange Seal Regular my road tires loose 1/2 their sealant in 2 months.
I suspect this loss to be accurate, ridden or not!
If I were storing a bike for 6 months, I’d remove the sealant (remove core, suck it out), pump up,
and store tires off ground in attempt not to break beads.
Barry
I suspect this loss to be accurate, ridden or not!
If I were storing a bike for 6 months, I’d remove the sealant (remove core, suck it out), pump up,
and store tires off ground in attempt not to break beads.
Barry
Likes For Barry2:
#5
Full Member
Join Date: Jun 2018
Posts: 216
Bikes: Specialized
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 142 Post(s)
Liked 53 Times
in
43 Posts
I store it as is. There is always the odd day in the winter when it's warm enough for me to grab a bike and go ride. However I have stored my bikes for up to 4 months. Replace sealant, tires were fine. I'm wondering any negative if you flip the bike upside down and store it that way.
#6
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,418
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 929 Post(s)
Liked 1,595 Times
in
1,021 Posts
Yep... Off the ground most important with tubes or without. If containing sealant giving them a spin every now and then and putting a little stick in the spokes to hold the wheel at a different orientation would also help.
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#7
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,341
Bikes: Giant Defy, Giant Revolt
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 988 Post(s)
Liked 1,186 Times
in
681 Posts
If I had a bike I would only ride a few times per year and couldn't do regular maintenance on myself, I'd run tubes.
__________________
It's like riding a bicycle
It's like riding a bicycle
#8
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,830
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4745 Post(s)
Liked 3,861 Times
in
2,510 Posts
Likes For 79pmooney:
Likes For cyclezen:
#10
Advanced Slacker
Join Date: Feb 2017
Posts: 6,187
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2749 Post(s)
Liked 2,516 Times
in
1,422 Posts
I’ve had bikes with tubless tires sit for most of a winter with no issues. Just sitting on the ground. A couple have gone flat or close to it, but that does not really hurt anything.
I would not bother removing them of asking someone to keep spinning them.
I would not bother removing them of asking someone to keep spinning them.
Likes For Kapusta:
Likes For Branko D:
#12
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,291
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,910 Times
in
1,884 Posts
Just prior to riding, add sealant & air. It might roll weird at first, but it'll bounce back to its old self
__________________
-Oh Hey!
-Oh Hey!
#13
ignominious poltroon
Join Date: Jan 2022
Posts: 3,927
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2185 Post(s)
Liked 3,337 Times
in
1,742 Posts
I just noticed my front tire is flat on a bike with tubeless I haven't ridden in 3 months. Oddly, the rear tire seems like it was the day I inflated it.
#14
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505
Bikes: R3 Disc, Haanjo
Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times
in
4,663 Posts
If you don't have them already, I'd recommend a sealant syringe with a thin "needle" that can insert all of the way in to the tire via the valve stem. They're about 10 bucks on Amazon - https://www.amazon.com/Tubeless-Seal...dp/B07WR9MMDW/.
You may also need to replace your valve stems, though. The lightweight, machined aluminum stems will almost always pass the needle; I use Muc-Off because they're available locally. These simplify and speed up sealant maintenance significantly.
That out of the way, I'd just remove the sealant before storing and then re-inject fresh sealant before riding, otherwise you may get a thick, dried up skin where the sealant pooled. This probably isn't problematic for the volume of sealant typically used in a road tire, but my gravel tires have had rather unsightly crusts in them after long off-seasons.
You may also need to replace your valve stems, though. The lightweight, machined aluminum stems will almost always pass the needle; I use Muc-Off because they're available locally. These simplify and speed up sealant maintenance significantly.
That out of the way, I'd just remove the sealant before storing and then re-inject fresh sealant before riding, otherwise you may get a thick, dried up skin where the sealant pooled. This probably isn't problematic for the volume of sealant typically used in a road tire, but my gravel tires have had rather unsightly crusts in them after long off-seasons.
Likes For WhyFi:
#15
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 72
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 260 Times
in
89 Posts
Thanks for all the excellent info, much appreciated. Yeah, if i asked my daughter to spin wheels on a regular basis she'd roll her eyes and put the bike on the curb soon after I Ieft .
Now that's one I hadn't thought of and probably the way I'll go. Excellent idea!
Using Orange Seal Regular my road tires loose 1/2 their sealant in 2 months.
I suspect this loss to be accurate, ridden or not!
If I were storing a bike for 6 months, I’d remove the sealant (remove core, suck it out), pump up,
and store tires off ground in attempt not to break beads.
Barry
I suspect this loss to be accurate, ridden or not!
If I were storing a bike for 6 months, I’d remove the sealant (remove core, suck it out), pump up,
and store tires off ground in attempt not to break beads.
Barry
#16
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 72
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 260 Times
in
89 Posts
If you don't have them already, I'd recommend a sealant syringe with a thin "needle" that can insert all of the way in to the tire via the valve stem. They're about 10 bucks on Amazon - https://www.amazon.com/Tubeless-Seal...dp/B07WR9MMDW/.