Restoring a 1983 Trek 720
#1
Newbie
Thread Starter
Restoring a 1983 Trek 720
Hi folks--
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use
The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?
I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?
Thanks for any help/info. (And if this is the wrong place for this post, please let me know).
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use
The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?
I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?
Thanks for any help/info. (And if this is the wrong place for this post, please let me know).
Last edited by pjw77; 07-02-22 at 01:37 PM.
#2
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 761 Post(s)
Liked 1,563 Times
in
757 Posts
First things first..... You need to quickly make enough posts so that you can upload photos!
The crankset determines BB spindle length (usually.....), so if you're keeping the cranks, get a BB with the same spindle length. It's possible the length is embossed on the spindle that's in there. And if you haven't dismantled the BB, maybe a cleaning and new bearings/grease are all you'll need.
If the rear hub is 126mm you should be able to fit a 7sp freewheel. But since it's got a 5sp on there, it's more likely that it's 120mm. If it's 120mm, you could fit a narrow 6sp.... Or spread the dropouts to 126mm, get a longer axle and spacers to make the old hub 126mm (you'll have to re-dish the wheel), or build up a new wheel with a 126mm hub.... Then you can use a 7sp.
The crankset determines BB spindle length (usually.....), so if you're keeping the cranks, get a BB with the same spindle length. It's possible the length is embossed on the spindle that's in there. And if you haven't dismantled the BB, maybe a cleaning and new bearings/grease are all you'll need.
If the rear hub is 126mm you should be able to fit a 7sp freewheel. But since it's got a 5sp on there, it's more likely that it's 120mm. If it's 120mm, you could fit a narrow 6sp.... Or spread the dropouts to 126mm, get a longer axle and spacers to make the old hub 126mm (you'll have to re-dish the wheel), or build up a new wheel with a 126mm hub.... Then you can use a 7sp.
Likes For ehcoplex:
#3
Full Member
Join Date: May 2015
Location: Mason Ohio
Posts: 238
Bikes: '85 Schwinn Madison, '46 Higgins Ultralite, 1950s Wally Green, '85 Trek 660, '82 3Rensho Export, '90 Trek 970, '91 Schwinn Paramount, '78 Dawes, '78 Trek 730
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 77 Post(s)
Liked 256 Times
in
106 Posts
#4
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1955 Post(s)
Liked 3,661 Times
in
1,679 Posts
My 1985 720 takes a 6 speed no problem but it came with 5.
#5
Newbie
Thread Starter
Ha, I'd be glad to post pics when I'm able.
I've already disassembled the bottom bracket, and it was not original--what I pulled out of it was a Shimano sealed-cartridge unit, which I'm really confident was not original on this bike. And when I compare that shimano to a couple of bb spindles I have lying around, one of which came out of a late 1980s trek touring frame, the Shimano is noticeably shorter. So i'm suspicious of it.
Also, I don't know why I hadn't tried this already, but I also have a rear-wheel from a late-80s/early 90s Trek "hybrid," with a 7-speed freewheel. And the 720 frame accepts that wheel, so I guess I now know its 126mm. Still not sure I know if the Suntour Cyclone will cope with a 7-speed, though...?
Also, I've read just enough about chain length to know that with that 28-tooth granny gear on the front, I will be limited as to the biggest sprocket I can have on the back. So that makes me think 7-speed freewheels might be ruled out by that math.
I've already disassembled the bottom bracket, and it was not original--what I pulled out of it was a Shimano sealed-cartridge unit, which I'm really confident was not original on this bike. And when I compare that shimano to a couple of bb spindles I have lying around, one of which came out of a late 1980s trek touring frame, the Shimano is noticeably shorter. So i'm suspicious of it.
Also, I don't know why I hadn't tried this already, but I also have a rear-wheel from a late-80s/early 90s Trek "hybrid," with a 7-speed freewheel. And the 720 frame accepts that wheel, so I guess I now know its 126mm. Still not sure I know if the Suntour Cyclone will cope with a 7-speed, though...?
Also, I've read just enough about chain length to know that with that 28-tooth granny gear on the front, I will be limited as to the biggest sprocket I can have on the back. So that makes me think 7-speed freewheels might be ruled out by that math.
#7
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,495
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 583 Post(s)
Liked 697 Times
in
393 Posts
The 83 Trek catalog shows a 6 speed heliocomatic 13-28 six speed rear setup which has probably been replaced although they were also made in 5 speeds. 720s are very respected here.
Likes For sd5782:
#8
Newbie
Thread Starter
After a little careful measuring, I think the rear dropout spacing is 120mm, not 126. (The wheel with the 7-speed freewheel did go in, but it didn't just slide right in, it needed some help.)
#9
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 761 Post(s)
Liked 1,563 Times
in
757 Posts
How large to you want to go with the biggest rear cog? IIRC a Cyclone GT (long-cage) can handle quite a bit of chain. And should be able to handle 7sp, regardless. Check Velobase or Sheldon Brown for the correct BB spindle length for the Sugino crankset.
#10
Newbie
Thread Starter
I've never used a half-step plus granny setup and I want to, so I intend to keep the 28-tooth granny gear that is currently on the crankset. And I think that implies very linear (?) differences in size for the sprockets on the freewheel...?
#11
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,806
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2439 Post(s)
Liked 3,125 Times
in
1,966 Posts
I think you can get an ultra 6 on there (120 spacing hub), and keep the existing hub. Might need a different wheel-set to go 7 speed, but since you are restoring, might as well find an ultra 6 (I assume the hubs are Maillard?), though finding them unworn and wider range is often tough.
Far as I know, the only Ultra 6s are the SunTour versions, Atom 77 Compact, and Regina BX-6 (I think that is the 120 mm hub version). @pastorbobnlnh will know better.
If you are not wanting to spend the $60-80 to get an Ultra 6, having 5 speeds is okay too!
Suntour Cyclone FDs are relatively easy to come by.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#12
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,704
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1949 Post(s)
Liked 2,010 Times
in
1,109 Posts
You should definitely fully explore the 1/2 step+ granny and the 5 speed FW you got might be lovely. Play with one of the online gear calculators. 6 sp can work ok and forget about 7.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Likes For Classtime:
#13
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1955 Post(s)
Liked 3,661 Times
in
1,679 Posts
You can go as low as 24 on your granny. A 14-28 five speed freewheel and 24-45-50 would cover a ton of ground. Personally my 720 wears 24-40-45 and 14-17-21-26-32 freewheel. Either way you'll be in good shape with the right length chain.
Likes For 52telecaster:
#14
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1955 Post(s)
Liked 3,661 Times
in
1,679 Posts
Hippy camo 720.
#15
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 761 Post(s)
Liked 1,563 Times
in
757 Posts
I've found this online gear calculator to be great. A good way to visualize your setup (note that you can hit the 'compare' button and add a second setup to the page, and also if you want to bookmark your setup you need to click on "link to the currently selected setup'). I've got a half-step + granny on my PX-10 and really like it (first 1/2+g I've ever had). I'm building up a Holdsworth now, and trying to keep it a double up front and it's a bit of a challenge to evenly cover the range I need!
How close are you adhering to 'restoration'? Staying as original as possible, or more resto-mod? The roads where I live are so uniformly awful, and the Appalachian-steep hilliness meant if I wanted to actually ride my PX-10 it was going to have to be a resto-mod.
How close are you adhering to 'restoration'? Staying as original as possible, or more resto-mod? The roads where I live are so uniformly awful, and the Appalachian-steep hilliness meant if I wanted to actually ride my PX-10 it was going to have to be a resto-mod.
#16
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Likes For bikemig:
#17
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
Exactly. I would guess an 83 is spaced at 128. I'm using a 10 speed, 130 spaced cassette hub in mine and it just slides right in.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#18
Newbie
Thread Starter
My goal is just to get this bike up-and-running, as economically as possible. I _did_ splurge on the Cyclone derailleur. But having, for instance, to build out a new rear-wheel would kill this project for me.
I wanted to replace the Regina freewheel because I had a heck of a time pulling it off, and I wasn't the first. The "tabs" that form the notches the removal tool fits into are chewed up; if I put it back on it might be for the last time. (And by the way, it's 13-15-18-21-24.)
I might have gotten overly ambitious, because I removed the axle and ball bearings from the rear hub (the hubs are Campagnolo) and after I was done I looked at it wondering how I'll ever get it reassembled. I have not disassembled the front hub yet, and am thinking I might not.
I wanted to replace the Regina freewheel because I had a heck of a time pulling it off, and I wasn't the first. The "tabs" that form the notches the removal tool fits into are chewed up; if I put it back on it might be for the last time. (And by the way, it's 13-15-18-21-24.)
I might have gotten overly ambitious, because I removed the axle and ball bearings from the rear hub (the hubs are Campagnolo) and after I was done I looked at it wondering how I'll ever get it reassembled. I have not disassembled the front hub yet, and am thinking I might not.
#19
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
My goal is just to get this bike up-and-running, as economically as possible. I _did_ splurge on the Cyclone derailleur. But having, for instance, to build out a new rear-wheel would kill this project for me.
I wanted to replace the Regina freewheel because I had a heck of a time pulling it off, and I wasn't the first. The "tabs" that form the notches the removal tool fits into are chewed up; if I put it back on it might be for the last time. (And by the way, it's 13-15-18-21-24.)
I might have gotten overly ambitious, because I removed the axle and ball bearings from the rear hub (the hubs are Campagnolo) and after I was done I looked at it wondering how I'll ever get it reassembled. I have not disassembled the front hub yet, and am thinking I might not.
I wanted to replace the Regina freewheel because I had a heck of a time pulling it off, and I wasn't the first. The "tabs" that form the notches the removal tool fits into are chewed up; if I put it back on it might be for the last time. (And by the way, it's 13-15-18-21-24.)
I might have gotten overly ambitious, because I removed the axle and ball bearings from the rear hub (the hubs are Campagnolo) and after I was done I looked at it wondering how I'll ever get it reassembled. I have not disassembled the front hub yet, and am thinking I might not.
Likes For bikemig:
#20
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
Hi folks--
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use
The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?
I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?
Thanks for any help/info. (And if this is the wrong place for this post, please let me know).
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use
The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?
I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?
Thanks for any help/info. (And if this is the wrong place for this post, please let me know).
The Sugino AT is one of the best, and best looking triple cranksets ever made. Check out Sheldon's database- https://www.sheldonbrown.com/bbsize.html.
I seem to remember it being 127- but there's other values in there. I've had several half step/granny crank sets but don't use them exactly in that context- but I will use the half step to find a more comfortable cruising gear- and only with 5 or 6 speed. I'm running 10 speed so my crank rings are 28-38-50. But I probably should be running a 48.
As mentioned- a 1983 Trek will not be spaced at 120- most likely 128 and you can use 126 and 130 with none of that "cold setting" nonsense- on top of it only being 2mm- it's 2mm with 47cm chainstays.
Yes you should be able to use a Cyclone GT (either first gen or MII) with 7 speed. The suntour barcons will work with that. I'd suggest getting real shift housing rather than the metal springy stuff it came with. I haven't used the old barcons with anything over 7 speed- you might have a bit of an accuracy problem at 9 and over. Again, half-step with 7 speed is dicey- someone can figure that out with a gear calculator.
Me, personally- if you're running the original DC960 brakes, I'd replace those with something cooler- XT M732, Deore MT62 or MT60 or XT MC-70- in that order.
I have a 1985 Trek 720- I've replaced most everything on it- but it's running a 10 speed triple. It's really a great great bike.
1985 Trek 720 by Dave The Golden Boy, on Flickr
85720Yard by Dave The Golden Boy, on Flickr
IMG_0616 by Dave The Golden Boy, on Flickr
IMG_2402 by Dave The Golden Boy, on Flickr
IMG_1728 by Dave The Golden Boy, on Flickr
IMG_1715 by Dave The Golden Boy, on Flickr
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Likes For The Golden Boy:
#21
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1955 Post(s)
Liked 3,661 Times
in
1,679 Posts
So... the Trek 720. An 83 would be first year with cantilever brakes and last year with the old school Trek styling.
The Sugino AT is one of the best, and best looking triple cranksets ever made. Check out Sheldon's database- https://www.sheldonbrown.com/bbsize.html.
I seem to remember it being 127- but there's other values in there. I've had several half step/granny crank sets but don't use them exactly in that context- but I will use the half step to find a more comfortable cruising gear- and only with 5 or 6 speed. I'm running 10 speed so my crank rings are 28-38-50. But I probably should be running a 48.
As mentioned- a 1983 Trek will not be spaced at 120- most likely 128 and you can use 126 and 130 with none of that "cold setting" nonsense- on top of it only being 2mm- it's 2mm with 47cm chainstays.
Yes you should be able to use a Cyclone GT (either first gen or MII) with 7 speed. The suntour barcons will work with that. I'd suggest getting real shift housing rather than the metal springy stuff it came with. I haven't used the old barcons with anything over 7 speed- you might have a bit of an accuracy problem at 9 and over. Again, half-step with 7 speed is dicey- someone can figure that out with a gear calculator.
Me, personally- if you're running the original DC960 brakes, I'd replace those with something cooler- XT M732, Deore MT62 or MT60 or XT MC-70- in that order.
I have a 1985 Trek 720- I've replaced most everything on it- but it's running a 10 speed triple. It's really a great great bike.
1985 Trek 720 by Dave The Golden Boy, on Flickr
85720Yard by Dave The Golden Boy, on Flickr
IMG_0616 by Dave The Golden Boy, on Flickr
IMG_2402 by Dave The Golden Boy, on Flickr
IMG_1728 by Dave The Golden Boy, on Flickr
IMG_1715 by Dave The Golden Boy, on Flickr
The Sugino AT is one of the best, and best looking triple cranksets ever made. Check out Sheldon's database- https://www.sheldonbrown.com/bbsize.html.
I seem to remember it being 127- but there's other values in there. I've had several half step/granny crank sets but don't use them exactly in that context- but I will use the half step to find a more comfortable cruising gear- and only with 5 or 6 speed. I'm running 10 speed so my crank rings are 28-38-50. But I probably should be running a 48.
As mentioned- a 1983 Trek will not be spaced at 120- most likely 128 and you can use 126 and 130 with none of that "cold setting" nonsense- on top of it only being 2mm- it's 2mm with 47cm chainstays.
Yes you should be able to use a Cyclone GT (either first gen or MII) with 7 speed. The suntour barcons will work with that. I'd suggest getting real shift housing rather than the metal springy stuff it came with. I haven't used the old barcons with anything over 7 speed- you might have a bit of an accuracy problem at 9 and over. Again, half-step with 7 speed is dicey- someone can figure that out with a gear calculator.
Me, personally- if you're running the original DC960 brakes, I'd replace those with something cooler- XT M732, Deore MT62 or MT60 or XT MC-70- in that order.
I have a 1985 Trek 720- I've replaced most everything on it- but it's running a 10 speed triple. It's really a great great bike.
1985 Trek 720 by Dave The Golden Boy, on Flickr
85720Yard by Dave The Golden Boy, on Flickr
IMG_0616 by Dave The Golden Boy, on Flickr
IMG_2402 by Dave The Golden Boy, on Flickr
IMG_1728 by Dave The Golden Boy, on Flickr
IMG_1715 by Dave The Golden Boy, on Flickr
Likes For 52telecaster:
#22
Newbie
Thread Starter
Thanks for all this info. Your 720 is lovely.
I had been wondering about that metal cable housing--I'd never seen it before. Lately I had been pondering how to clean it up, so I guess maybe I won't have to solve that.
I had been wondering about that metal cable housing--I'd never seen it before. Lately I had been pondering how to clean it up, so I guess maybe I won't have to solve that.
Likes For pjw77:
#23
Newbie
Thread Starter
Rear wheel / frame mismatch
It appears to me that the rear wheel I bought with the bike is for a 120mm setup, not the 128 that would be correct for this frame.
It's been so long now that I just don't remember if the wheels where on the bike when I bought it all, or not. Would the bike be rideable if you squeezed the rear triangle to hold that smaller-than-it-wants rear wheel?
Thanks for any info--
It's been so long now that I just don't remember if the wheels where on the bike when I bought it all, or not. Would the bike be rideable if you squeezed the rear triangle to hold that smaller-than-it-wants rear wheel?
Thanks for any info--
Hi folks--
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use
The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?
I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?
Thanks for any help/info. (And if this is the wrong place for this post, please let me know).
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use
The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?
I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?
Thanks for any help/info. (And if this is the wrong place for this post, please let me know).
#24
Newbie
Thread Starter
It appears to me that the rear wheel I bought with the bike is for a 120mm setup, not the 128 that would be correct for this frame.
It's been so long now that I just don't remember if the wheels where on the bike when I bought it all, or not. Would the bike be rideable if you squeezed the rear triangle to hold that smaller-than-it-wants rear wheel?
Thanks for any info--
It's been so long now that I just don't remember if the wheels where on the bike when I bought it all, or not. Would the bike be rideable if you squeezed the rear triangle to hold that smaller-than-it-wants rear wheel?
Thanks for any info--
Last edited by pjw77; 07-05-22 at 03:21 PM.
#25
Senior Member
Join Date: Apr 2014
Location: Back in Lincoln Sq, Chicago...🙄
Posts: 1,609
Bikes: '84 Miyata 610 ‘91 Cannondale ST600,'83 Trek 720 ‘84 Trek 520, 620, ‘91 Miyata 1000LT, '79 Trek 514, '78 Trek 706, '73 Raleigh Int. frame.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Liked 370 Times
in
219 Posts
I used CR18's on my '83 Trek 720 with no complaints.
https://www.treefortbikes.com/Qualit...MaAlweEALw_wcB
Likes For Chr0m0ly: